Polyshine brochure customer (printable) kỹ thuật đánh bóng

Kỹ thuật đánh bóng inox. đánh bóng nguyên liệu. Đánh bóng sắt đánh bóng bề mặt các loại. Chi tiết liên hệ: 0906981990 Kỹ thuật đánh bóng inox. đánh bóng nguyên liệu. Đánh bóng sắt đánh bóng bề mặt các loại. Chi tiết liên hệ: 0906981990

Trang 4

Chris Galea acquired Ferro Finishing off Reg Nodle in Sydney, Australia Polyshine has continued with the Ferro range of products with some compounds seeing improvements made via new materials coupled with further research and development

Ferro commenced manufacturing in 1968

as a manufacturer of supplies to the metal inishing industry Since this time, the range

of products has continued to improve and expand into a highly recognised brand throughout the world that is used by industry leaders within their ield of manufacturing including: Automotive fabrication and paints, plastics, lacquers, ibreglass, natural stones, ceramics, wood and imitation marble

2009 – 2011 saw the development of new compounds and in particular advancement and expansion in the liquid compound range

of cutting and polishing compounds This was driven by Polyshine working closely with new and existing clients around the world who were seeking either improved or customised inishes

With the growth of Asia in the metal inishing sector, in 2009 Polyshine opened an ofice

in Singapore so that it could provide a level

of service to its growing Asian and continent client base

sub-Polyshine has now established itself as a highly creditable provider of end to end surface inishing, from raw product stage through to inished goods This is bought about by working closely with the client on processes through to staff training

More and more new and existing customers seek Polyshine’s expertises to come in and evaluate their current processes

The end goal being to:

Reduce production time, without compromising the inished goods Companies desire to increase their price competitiveness and drive higher proits

Polyshine polishes give the inishing touch to manufactured articles such as:

Automotive paint Marine products Stainless steel cutlery and kitchenware Aluminium kitchenware

Bull bars Balustrading Jewellery and watches Hospital furniture Hotel and shopping centre ittings Boat ittings

Fibreglass Lacquered furniture Kitchen bench tops All kitchen sinks Musical instruments Ornaments

Semiprecious stones Chrome plated appliances Aircraft

Twin cab and 4WD bars and supports

Where Polyshine inishing polishes can

be found:

Service and repair industries such as smash repairs, car detailers, car and truck yards, transport companies, aviation, military, vintage car and motor cycle restorers, musical instrument restorers, hotels and shopping centres, boat and surfboard restorers

The general public uses our polishes for the maintenance of cars, recreational vehicles, motor bikes, cutlery, brassware, jewellery, taps, nameplates, Balustrading, door locks, chrome plated appliances, kitchen sinks and other household surfaces

Manufacturing industries such as latware, kitchenware, jewellery, watchmaking, automotive, architectural ittings, tap ware, Balustrading, and assorted stainless steel fabricators use Polyshine polishes

Trang 6

Index

Trang 7

PRODUCT CODE

MAXCUT20

The fastest cutter for hard metals The rate of metal removal is high, with little emphasis on brightness To be used on sisal buffs for the removal of scratches and “orange peel” May be used on all metals

PCS PER CARTON PURPOSE FOR USE ON

Maximum Cutting Hard Metals

Ferropol 108

Medium greasy for a fast cutting and low brightness

Most Metals

25

Cuting Guide

Brightness GuidePRODUCT NAME

CUTTING COMPOUNDS PRODUCT CODE

FSCUT25 / FSTCUTSB

A fast and economical cutter for hard metals The rate of metal removal is high, with less emphasis on brightness To be used on sisal buffs for the removal of scratches and “orange peel” from all metals

Fast and economical cutting Hard Metals

25

Cutting Guide

PRODUCT CODE

FPOLMG20 / FPOLMGB25

Medium greasy fast cutter with low brightness The grease composition adheres well to the buff, permitting less frequent application of polish to the wheel, therefore very economical Suitable for all metals, especially before electroplating

Medium greasy for a fast cutting and low brightness

Trang 8

Fast cutting and with

a cleaner inish All Metals

Is a pre-mixed combination of abrasive and Grit Bond which is fast drying for lexible polishing and deburing Suitable for ine satin inish or where low or uneven micro inish is required To be used with a cotton stitched buff wheel

FOR USE ON PURPOSE

For a satin / grain like semi bright inish (packaged in resealable bags)

Trang 9

PRODUCT CODE

SSFIN25 / SSFINSB24

For a dry non greasy inish that allows better inspection for polishing defects Best used after Fastcut, Coarse Cutter or Ferropol MG To be used with soft cotton buff wheels

Medium Brightness Smooth metals with no deep scratches

Is used for obtaining a mirror inish Best used after a perfect cutting or pre-polishing preparation

To be used with a soft cotton buff wheel

Mirror Finishing All Metals

25

Cutting Guide

FINISHING COMPOUNDS PRODUCT CODE

RIGELSG25 / RIGEL1KG20

Is used for obtaining a mirror inish Best used after a perfect cutting or pre-polishing preparation

To be used with a soft cotton buff wheel

Economical alternative to Green Chrome

All metals

25

Cutting Guide

PRODUCT CODE

HYFINSB24 / HYFINSG25

White compound for very bright mirror inishing Similar to RIGEL but slightly brighter and with hardly any cut The polish to select if BLUE HUBBLE is too expensive Suitable for all metals

Very bright mirro inishing All Metals

Trang 10

PRODUCT CODE

FINHN25

For a dry non greasy inish that allows better inspection for polishing defects Best used after Fastcut, Coarse Cutter or Ferropol MG To be used with soft cotton buff wheels

Finish HN (Std Orion bar)

Medium Brightness Smooth metals with no deep scratches

A two in one polish with high brightness and good cutting

All metals that are free

Multishine (Large and small bar)

Ideal for any type

of inish All Metals

A fast cutter for all metals with medium brightness May be used on a sisal buff for cutting, followed on a cotton buff for medium brightness

Brightcut DX (Large and small bar)

Fast cutting with Medium Brightness All metals

Trang 11

PRODUCT CODE

POLACB20

For high lustre polishing for all types of plastic Use a soft cotton buff Care should be taken

to avoid excessive heating as the plastic may melt Small diameter buffs with a low number of revolutions reduce friction

A glossy inish Plastics, resins and wood

20

Cutting Guide

PRODUCT CODE

CnCNo.1

A fast cutter for all metals with medium brightness May be used on a sisal buff for cutting, followed on a cotton buff for medium brightness

Cut & Colour No 1

Medium brightness with stronger cutting All Metals

All Metals

18

Cutting Guide

PRODUCT CODE

GRRG#130

In brightness sits between Green Rouge and Blue Hubble / A brighter shine than Hyperin

Trang 12

PRODUCT CODE

BHUB64018 / BHUB28024

The ultimate inishing compound, extremely bright, top of the range Recommended for the polishing of jewellery but also suitable for stainless steel cutlery, kitchenware, ornamental brass and copper To be used on a soft loose fold cotton buff Never use BLUE HUBBLE on a buff that was used with a different compound before Contamination with another polish will always reduce brightness

Blue Hubble (640g) (280g)

The superior mirror inish Copper & BrassStainless Steel,

PRODUCT CODE

TRIPJ25 / TRIPJ24

Combined cutting and inishing compound for soft metals only Suitable for aluminium, brass, copper and zinc diecast Follow up with a inishing compound if a brighter surface is required

‘Silica Free Clay ’

Tripoli J (Bar)

Tripoli’s are a combination of cutting and inishing

Aluminium, Zinc Diecast, Copper &

Brass

25 24

Cutting Guide

Cutting Guide Brightness Guide

a new application is required Although all Tripoli polishes contain the same abrasive, the grease composition and the ratio between grease and abrasive powder may vary for different grades Contact us to discuss your requirements

Brass

20

Trang 13

Ferro Grey Cutter

Fast and economical cutting

Ferro White Finish

Polish with extra cut All Metals

72

Cutting Guide

Ferro White Finish provides more cut and is just as bright as Blue Hubble on curved surfaces Also suitable on all metals Apply on a soft cotton buff Five colour-coded polishes are available fsr the polishing of precious metals The performance ranges from extreme brightness and low cut to high cut and medium brightness All ive products are very dry or non greasy, permitting the polisher to observe the progress of his work and miinimising the need for cleaning

72

Cutting Guide

PRODUCT CODE

JEWELRED

Ferro Red Rouge is a inishing compound for soft metals only With a brightness approaching that of Blue Hubble it is a cheaper alternative for soft metals such as copper, brass, silver and gold Use on a very soft cotton buff

Ferro Red Rouge

Economical Finishing Compound

Soft Metals

72

Cutting Guide

Trang 14

Blue Hubble 130g

The superior mirror inish Copper & BrassStainless Steel,

72

Cutting Guide

Brightness Guide

Trang 15

Abrasive lubricant All abrasive products

15

PRODUCT NAME

PRODUCT CODE

ELBOGRS12 / BOBGR12

A cleaner form of Lubricant than Grease bar Available in tube or tub form

Elbo Grease / Bobbin Grease

12

PRODUCT NAME

A non greasy dry lubricant and reduces clogging of abrasive belts and discs used on soft ferrous metals Also retards the sharpness of cut on belts and discs, giving a softer/ iner inish

Trang 16

non-PLASTIC POLISHING CREAMS

PRODUCT CODE

PLPOLMW20

Plastipol MW

Mass inishing

Spectacle frames, Buttons, Buckles &

other consumer goods

Mass inishing

Mass inishing Buttons, Buckles & Spectacle frames,

in tumbling barrels

PRODUCT NAME

Plastipol 4C

Trang 17

Mass cutting and inishing

Spectacle frames, tons, Buckles & other consumer goods in tumbling barrels

But-4lt

PRODUCT NAME

Trang 18

LIQUID POLISHING COMPOUNDS

PRODUCT CODE

LQFIN8820

Finish LQ88

Very bright mirro inishing All Metals

10

Cutting Guide

1

Brightness Guide

PRODUCT CODE

LQMULSH20

Liquid Multi-shine

Ideal for any type of inish All Metals

Bright mirro inishing All Metals

Cut & Colour 3T

This is the liquid version of BLUE CRYSTAL.Used in the inal polishing stage in a automatic machine on stainless steel cutlery

This is the liquid version of the MULTISHINE Can be used in the inal stage in automatic machine polishing where the pre polish hasnt been used long enough.This will remove iner scratches as

it has the ability cut also Can be used on all metals,with a cotton wheel

This is a version of HYPERFIN Used on a automatic polishing machine as a inal polish for aluminium and stainless steel cookwares This has a medium brightness and strong cut.It can be used on a sisal or cotton wheel

Trang 19

LIQUID POLISHING COMPOUNDS PRODUCT CODE

LQTRP4C20

Liquid Tripoli 4C

Brass

Cutting Guide

Brightness Guide

PRODUCT CODE

LQSPCUT20

Spraycut

Fast and economical cutting

For a satin / grain like semi bright inish (packaged in resealable bags)

Fast cutting for all metals All Metals

This is a liquid version of TRIPOLI Bar.Used on a automatic polishing machine for the polishing

of soft metals like brass,zinc before electroplating and on aluninium before its anodizing.Its also suitable as a combined cut and colour inal polish for soft metals

This liquid is a version of FASTCUT This is used in the same application as the LIQUID MAXICUT but cheaper

This liquid is a version of the GLORION greaseless This is mainly used for satin inish on stainless steel

This liquid is the version of BRIGHTCUT Used is the same application as liquid MAXICUT and SPRAYCUT but this has a slightly less cut but more shine

Trang 20

LIQUID POLISHING COMPOUNDS

PRODUCT CODE

LQCT10W20

Faster cutting than Liq 10X with shine Mainly Stainless Steel

Very Bright Mirror Finishing All metals

Used for heavy stock removal Stainless Steel

Pre polishing liquid Stainless Steel

This liquid is a version of the WHITE CUTTER.This is used in the automatic polishing machine ,as

a pre polish on stainless steel, pots, pans & cutlery

This is simliar to the version of LQ10X but is of highter quailty for longer wearing and faster cutting and shining for most metals

Unipol contains soft, ine alumina to gently polish and restore metal surfaces such as: Brass, Stainless Steel, Chrome, Aluminium & Aluminium Alloys A premium metal polish that is ideal for polishing jobs to be done by hand, and imparts an unbeatable shine Application can be used by hand or Machine

This liquid is a higher cut version of FASTCUT

Trang 21

Liquid Relection

Relection Paste

PRODUCT CODE

MLUXNo320 / MLUXN031

General purpose polish and surface restorer

Chrome, Aluminium

Cutting Guide

PRODUCT CODE

REFLLQ20 / REFL4 / REFL25015

Liquid Relection metal polish contains soft, ine alumina to gently polish and restore metal surfaces such as: Brass, Stainless Steel, Chrome, Aluminium & Aluminium Alloys Liquid Relection is ideal for polishing jobs to be done by hand, and imparts an unbeatable shine

Premium Metal polish contains soft, ine alumina to gently polish and restore metal surfaces such as: Brass, Stainless Steel, Chrome, Aluminium & Aluminium Alloys Premium Metal polish is ideal for polishing jobs to be done by hand, and imparts an unbeatable shine

General purpose polish and surface restorer

All Metals

Cutting Guide

Cutting Guide Brightness Guide

PRODUCT CODE

REFLPS20 / REFLPS1 / REFLP500

METALUX - similar to REFLECTION but with more cut Will also wipe off to a smear free surface Residues can also be removed by washing Very popular in the aluminium manufacturing industry, such as bull bars

General purpose polish and surface restorer All Metals

Premium Metal Polish

Very bright mirror inishing All metals

15

PRODUCT NAME

Định dạng
Số trang	32
Dung lượng	12,23 MB