Dynaform New formability report in BSE

New Formability Report in BSE BSE/MSTEP Date: Apr... Nodal result is now the default option between nodal result and element result for the Formability Report.. A Default button is no

New Formability Report

in BSE BSE/MSTEP

Date: Apr 18th, 2014

Outline

1.  Nodal result is now the default option

between nodal result and element result

for the Formability Report

2.  A Default button is now present in the

Formability Report window

Descriptions

Nodal Result: Allows the user to show the result

through the contour interpolated by nodes

Element Result: Allows the user to show the result

through the unit of the element instead of the

contour interpolated by nodes

Default: Clicking this button can recall the saved

default config setting after making changes to the

options for certain cases

Note: The Strain Tensor result only can be set to

nodal result

Descriptions

Figure 1

1.  Start up Dynaform 5.9.2 and open the database Formability Report in

BSE.df See Figure 1

2.  Go to BSE->MSTEP See Figure 2

3.  Click Run in the MSTEP window See Figure 3

Figure 2

Figure 3

Figure 4

4.  Click the Formability Report button See Figure 4

5.  Click Apply See Figure 5

6.  The result is illustrated in Figure 6 on the next slide

Figure 5

Figure 6