1. Trang chủ
  2. » Văn Hóa - Nghệ Thuật

Mô hình lâu đài Osaka, Nhật Bản. P3

7 1K 3

Đang tải... (xem toàn văn)

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Định dạng
Số trang 7
Dung lượng 2,43 MB

Các công cụ chuyển đổi và chỉnh sửa cho tài liệu này

Nội dung

Kirigami là nghệ thuật cắt giấy truyền thống của Nhật Bản, với tên gọi được ghép từ hai chữ : “kiru” (có nghĩa là cắt) và “kami” (là giấy). Tính đối xứng là đặc điểm nổi bật nhất trong kirigami truyền thống. Hình bông tuyết, ngũ giác, và bông hoa là những hình ảnh cổ điển quen thuộc đặc trưng cho kirigami mà trong đó, cắt giấy đơn thuần chỉ nhằm tôn lên cấu trúc tối giản, cân xứng nhưng cũng rất linh hoạt của thiết kế. Nghệ thuật cắt giấy được cho là lần đầu tiên xuất hiện trong các đền chùa Nhật Bản như một cách thể hiện lòng thành kính trước các vị thần. Đến khoảng thế kỷ XVII, Kirigami được biết đến rộng rãi khắp châu Á như một hình thức nghệ thuật đích thực. Không chỉ riêng ở Nhật mà cả ở Trung Quốc, người ta tạo nên các thiết kế kirigami để biểu trưng cho những điều tốt đẹp và quan trọng như: Thịnh vượng, Hoàn hảo, Quý phái, Trang nhã hay thậm chí là mối liên kết giữa con người và vũ trụ. Bunraku, một loại hình múa rối Nhật Bản đôi lúc cũng sáng tạo những con rối bằng giấy từ kỹ thuật Kirigami, nhưng vẫn đảm bảo các bộ phận có thể cử động được.

Trang 1

Assembly Instructions : Seven A4 sheets ( No.1 to No.7 )

section on its back side before cutting out the sections is highly recommended.

(* This way, you can be sure which section is which even after cutting out the sections.)

Fold in this direction.

Assemble the stone wall

Attach the opposite side

in the same way

Attach the opposite side

in the same way

* This model was designed for Papercraft and may differ from the original in some respects

* Build the model by carefully reading the Assembly Instructions, in the parts sheet page order

Assembly Instructions

* Hint:Trace along the folds with a ruler and an exhausted pen (no ink) to get a sharper, easier fold

1

Trang 2

Assemble the first level.

Attach the opposite side

in the same way

Attach the opposite side

in the same way

Fold in from the back and glue in place

Back

Attach the opposite side in the same way

Fold in from the back and glue in place

Attach the opposite side in the same way

Bottom

Assemble the second level

Trang 3

Assemble the third level.

Attach the opposite side

in the same way

Fold in from the back and glue in place

Attach the opposite side

in the same way

Trang 4

Assemble the fourth level.

Attach the opposite side

in the same way

Fold in from the back

and glue in place

Attach the opposite side

in the same way

Trang 5

Assemble the fifth level.

Attach the opposite side in the same way

Fold in from the back and glue in place

Attach the opposite

side in the same way

Attach the opposite side in the same way

Glue this part in place astride part 33

Center this part visually when attaching it in place

Trang 6

Assemble the base.

Before attaching the parts, draw horizontal and vertical lines intersecting at the center of the bottom sides of parts 35 and 36

Bottom view

Turn the base over and attach this part

in line with the marks you made in step 2

After gluing part 39 in place, turn the base over

so that its top faces up again

http ca / © PA OP Inc

http ca om/c n/ © OP

Trang 7

Assemble the white walls Finish assembling the entire castle.

* Match the numbers on the marks

Ngày đăng: 16/09/2016, 13:08

TỪ KHÓA LIÊN QUAN

🧩 Sản phẩm bạn có thể quan tâm