Work Aids of Sewing MachinesDefinition The extra machine parts which may be attached to speed up the production and improve quality in the sewing machine are called work aid.. Guideo G
Trang 1Work Aids of Sewing Machines
Definition
The extra machine parts which may be attached to speed
up the production and improve quality in the sewing
machine are called work aid.
Objectives
• To increase the production.
• To improve the quality of garments.
• To reduce the work- load on operator.
• To reduce the time for handling.
• To control the garments quality
Trang 21 Guide
o Guides are used for correct sewing in predetermined position or in a determined and proper distance form edge of fabric
o It is also used for straight and curved sewing to increase the quality and productivity.
o Edge guides are used in over edge machine
Different types of work aids used in Sewing Machine
Trang 32 Compensating Foot
o This type of pressure foot has two sections and each section can perform their works in different height with the help of spring
o It is suitable to sew 1-2 mm distance from the edge of fabrics
o Specially used for sewing more thickness fabrics, i.e collar closing, seam pocket etc
Trang 43 Specialized pressure foot
o It is used for attaching piped shape
trimmings like braid or elastic
o It is suitable for sewing very close to
chain or pipe.
Trang 54 Stitching Jig
o Specially used for sewing small parts of garments.
o Dye cutting parts are attached with the stitching jig
o It is made with two aluminum or plastic seat whose one end is joined with wage.
o Two or more fabric pattern is placed properly in jig; the seats are closed together and sewing along slot line
o Extensively used in collar and cuff
Disadvantages of Stitching Jig :
The additional allowance is required due to not movement of the fabric during sewing in stitching jig So fabric wastage is more.
Skilled and experienced operator is required for the controlling of stitch length properly.
Trang 6Fig : Stitching Jig
Trang 75 Rack Guide
o It is used to attach lace, braid and elastic with garments parts
o Rack guide is used at the front of pressure foot for the placement of lace or braiding the predetermined position from the rolls
o The lace or braid rolls are placed in rack guide
Trang 86 Light
o Marking with chalk or pencil is required on the fabric for sewing of parts of the garments
o The chalk spot or marking are found after washing and sewing
o In order to remove this problem special marker used which are not visible in normal light but visible in ultraviolet ray
o The light can reflected as thin beam along needle
Trang 97 Folder
o A sewing machine attachment which folds one or more materials into the desired configuration for sewing is called folder
o It may be placed in the middle of pressure foot or in front of pressure foot
o It is used to increase the production and to ensure the quality of products
Trang 108 Slack Feeder
o Lace, braids, tape or elastic are supplied
in roll forms exists tension and attached
in the garments in tension condition, seam pucker may be created due to shrinkage Slack feeder is used to avoid this problem
o In slack feeder, lace or braid is opened
from rolls with the help of motor and roller Then hangs as a loop form So tension is reduced before sewing
Trang 119 Elastication
o It helps to join elastic to the garments
easily and at a higher speed.
o Elastication can be made using folder in
the front of pressure foot.
o Computerized elastication machine is
used to increase products quality and productivity.
Trang 1210 Thread Cutter
o This is a mechanical device in sewing machine used to cut thread at a regular distance
o After completing the sewing, the thread is cut by ‘Manually operated sewing machines’ or ‘Automatic operated sewing machines’
Trang 1311 Latch Back Device
o In over edge sewing machine, the thread
cutting ends can be secured with the air flow called latch back In this method, one end can be latch back.
o In present, in latch back sewing machine,
electronic edge sensor is added and both ends of thread can be latch back
Trang 1412 Compressed Air
o It is used to remove curling from fabrics,
specially knitted fabrics.
o The compressed air is flown vertically
with the fabric edge in front of edged trimmer to become straight by reducing the curling of fabric edges.
Trang 1513 Stacker
o It is used to shift garments from one
hanging layer.
o It reduces time, manpower and also
protects the garments from unexpected fold, dust and dirt.
Trang 16Thanks to All