basics of dyeing - what is dyeing

Bleaching Dyeing Hydro extraction Grey Yarn inspection Batching & Loading Soft Winding Hard Winding Scouring Drying Final Inspection Delivery... Desizing Scouring Bleaching Printing Grey

DYEING

The application and fixing of a dye to a substrate, normally with the intention of obtaining an even distribution through out the substrate.

There are three types of dyeing :

Bleaching Dyeing Hydro extraction

Grey Yarn inspection

Batching & Loading Soft Winding

Hard Winding

Scouring

Drying

Final Inspection Delivery

Desizing Scouring Bleaching Printing

Grey fabric inspection

Brushing Stitching

Mercerizing

Singeing

Dyeing

Bleaching Printing Mercerizing

Dyeing Finishing Final inspection Delivery

Bleaching

Dyeing

Printing

Grey fabric inspection

Singeing

Batching

Final Inspection

Mercerizing

Finishing

Delivery

Successive stage of Dyeing

Dye is diffused in the fibre

Dye is dispersed in the dye bath

Dye in the electrical double layer

Dye in the diffusion layer

Dye is absorbed on the fibre surface

Bond formation between dye & fibre

+ -+ - + - + - + - + - + - + - + - +

-A

B

Diffusion layer thickne ss

Distance of fibre surface from AB

Diffusion layer

Electrical double layer

Fibre

Dye molecule

According to method of application:

According to the chemical structure:

 Wetting agent

 Detergent

 Sequestering agent

 Leveling agent

 Anti foaming agent

 Dispersing agent

 Anti creasing agent

 carrier

Two types of dye application techniques exist:

1) Direct application of dye liquor by

spraying, foam application, or printing.

2) Continuous immersion of the fabric in a

dye bath and removal of the excess of

liquor by squeezing or suction (padding).

1.Continuous dyeing processes

 Pad dry process

 Pad steam process

2.Semi continuous processes

 Pad-batch process

 Pad jig process

3.Discontinous process:

 Winch

 Jet

 Jigger

4.Pad Dyeing Processes:

 Pad roll process

The goal of every dyeing is a colored textile in the desired shade, homogeneous in hue and depth of shade, produced by an economic process and which exhibits satisfactory fastness properties in the finished state.

Basically there are three methods of dyeing textiles: 1) Mass dyeing: dyeing of a synthetic polymer before fiber formation.

2) Pigment dyeing: affixing an insoluble colorant on the fiber surface with a binder.

3) Exhaustion dyeing from an aqueous bath with dyes that have an affinity for the fiber.

 The liquor ratio influences the dye solubility and

the strength of the electrolyte effect Lower liquor ratios are employed whenever possible, for ecological, economic, and technical reasons.

 The electrolyte (i.e., sodium chloride or sodium

sulfate), its concentration, and the speed of addition control the adsorptive behavior of the dyes and the degree of exhaustion A high electrolyte content of the dye bath shifts the dyeing equilibrium toward the fiber.

 The pH value influences solubility, substantively of the dyes, and their stability in the dye bath Lower pH values improve exhaustion; however, leveling proceeds preferably at higher pH values.

of the dyeing equilibrium, which at room temperature is shifted strongly toward adsorption on the fiber

Colored textiles are produced today on

a large industrial scale Although modern automation techniques have

measurement, metering of dyes and auxiliaries, and automatic control of the dyeing process.

We would like to express many thanks to our honorable teacher Prof Dr Zulhash Uddin giving us a very good opportunity for presenting ourselves We also thanks our parents who encouraged us every step of our life Lastly thanks all of you who are give kind attention for this presentation ceremony