1. Trang chủ
  2. » Kỹ Thuật - Công Nghệ

Tài liệu về cable devicenet

3 174 0

Đang tải... (xem toàn văn)

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Định dạng
Số trang 3
Dung lượng 111,5 KB

Các công cụ chuyển đổi và chỉnh sửa cho tài liệu này

Nội dung

ODVA ThickTape shield over pair Al/polyester foil out w/ shorting fold pull-on applied Electrical Characteristics Specification Capacitance between conductors 10.75pF/ ft @ 1KHz Capaci

Trang 1

Products/Services

Trang 2

ODVA Thick

Tape shield over pair Al/polyester foil out w/ shorting fold (pull-on applied)

Electrical Characteristics Specification

Capacitance between conductors 10.75pF/ ft @ 1KHz

Capacitance between one

conductor and other conductor

connected to shield

24pF/ ft @ 1KHz

Capacitive unbalance 1200 pF/ 1000 ft.maximum

DCR - @ 20° C 6.9Ω /1000 ft max., 20.4 Ù/km nom

Attenuation

@ 125 kHz: 0.049 dB/100ft

@ 250 kHz: 0.049 dB/100ft

@ 500 kHz: 0.049 dB/100ft

@ 1 MHz: 0.049 dB/100ft

DC Power Pair Specifications Physical Characteristics Specification

Tape shield over pair Al/polyester foil out w/ shorting fold (pull-on applied)

Electrical Characteristics Specification

General Specifications Physical Characteristics Specification

Geometry 2 shielded pairs, common axis w/ drain wire in center

Roundness Radius delta less than 15% of 1/2 O.D

Jacket marking Northwire Inc DataCELL® FIELD DeviceNet Thick –

FPLTC154C-001 (UL) 15AWG/2 18AWG/2 PLTC

Trang 3

75°C E90625 or AWM 80°C 600V or CSA AWM

LL54185 I/II A/B 80°C 600V FT4

Electrical Characteristics Specification

DCR (braid+tape+drain) 1.75Ω /1000 ft nominal @ 20°C

Applicable Environmental

Agency certifications (US and

Canada)

NEC (UL) type PLTC or AWM; CSA AWM (note: PLTC supercedes CL2 and CL3 per NEC

725.61) Flexure degrees 2 lb minimum pull force, 30 cycles per minute,Tested 2000 cycles minimum at 4.5 bend radius 90

tic-toc method Bend raduis 20 x diameter (installation); 7 x diameter (fixed) Operating ambient temperature -20 +75°

Ngày đăng: 05/06/2015, 17:18

TỪ KHÓA LIÊN QUAN

TÀI LIỆU CÙNG NGƯỜI DÙNG

TÀI LIỆU LIÊN QUAN

w