PLASTICS ADDITIVESAN INDUSTRIAL GUIDE phần 2 doc

The Third Edition of this useful book is divided into three volumes.. Volume II describes almost 1,400 plastics additives which are currently available to industry.. It is the result of

The Third Edition of this useful book is divided into three volumes Volume II describes almost 1,400 plastics additives which are currently available to industry It is the result of information received from 74 industrial companies and other organizations The data represents selections from manufacturers’ descriptions made at

no cost to, nor influence from, the makers or distributors of these materials Only the most recent information has been included It is believed that all of the products listed here are currently available, which will be of utmost interest to readers concerned with product discontinuances

Plastics additives, a complex and growing group of minerals and chemical derivatives, account for 15 to 20% by weight of the total volume of plastic products marketed They are produced by a large number of companies for a wide variety of customers and needs Growth of the use of these additives, which impart one or more desirable properties to resins, is relatively strong, about 3.5 to 4% per year Environmental constraints, however, have imposed rigorous performance requirements on many products, thus placing added expenses on the development costs of these materials

Plastics additives are divided into logical sections in three volumes

Volume I:

I Adhesion Promoters

II Anti-Fogging Agents

Preface

viii 2HAB=?A

III Antioxidants

IV Anti-Static Agents

V Antibacterials/Fungicides/Mildewcides

VI Bonding, Blowing and Foaming Agents VII Dispersants

VIII Fillers and Extenders

IX Fire and Flame Retardants/Smoke Suppressants Volume II:

X Impact Modifiers

XI Initiators XII Lubricants XIII Micas XIV Pigments, Colorants, and Dyes

XV Plasticizers and Esters XVI Processing Aids XVII Release Agents XVIII Silanes, Titanates, and Zirconates XIX Slip and Anti-Blocking Agents Volume III:

XX Stabilizers XXI Stearates XXII UV Absorbers XXIII Viscosity Regulators XXIV Waxes

XXV Miscellaneous and Multipurpose Compounds The Table of Contents of each volume is organized to also serve

as a subject index Each raw material is located in the section which

is most applicable The reader seeking a specific raw material should check each section which could possibly apply In addition to the

2HAB=?Aix above, two further sections are included in each volume: a list of

Suppliers’ Addresses and a Trade Name Index These will be

ex-tremely helpful to the reader

The following information is supplied for each product, as

available, in the manufacturer’s own words:

Company name and product category

Trade names and product numbers

Product description: a description of the product’s

main features, as described by the supplier

The three volumes of this book will be of value to technical and

managerial personnel involved in the preparation of products made

with these plastics additives as well as to the suppliers of the basic raw

materials

My fullest appreciation is expressed to the companies and

organizations who supplied the data included in this book