Hướng dẫn sử dụng Coreldraw x5 - part 54 pptx

Click the Auto-Create Color Styles button to open the Automatically Create Color Styles dialog.. Mixers create colors using “color harmonies” and color blend tools.. Mixing with Color Ha

To create a collection of color styles and child color styles from a selection of existing colored objects in your document is quick and easy, as follows

Sampling and Saving Colors from a Document

1. PressCTRL+Ato select everything on the page, or select individual objects Open the Color Styles docker by choosing Tools | Color Styles

2. Click the Auto-Create Color Styles button to open the Automatically Create Color Styles dialog

3. Choose the properties on which you want to base your new collection of styles by choosing the Use Fill Colors and/or Use Outline Colors check boxes

4. Choose Automatically Link Similar Colors Together for flexibility in future revisions to your document, or choose Convert Child Palette Colors To CMYK if you think you’ll have a future need to use only CMYK values for objects you’ll add to the drawing

5. The Many Parents Or Few Parents slider can be used to alleviate the world’s

overpopulation crisis Only kidding—use this slider to limit the number of parent

(master) colors generated, which is quite useful if you have hundreds of unique colors in the document

6. To review the styles that will be automatically created and listed in the Color Styles docker before committing, click the Preview button The color styles CorelDRAW is about to create are listed in the preview window

7. To accept the previewed listing and close the dialog, click OK Your styles are automatically created

Moving from Color Models to Other Ways to Define Color

Although color models provide the designer with an intuitive device for picking colors,

CorelDRAW offers alternative methods in the form of the color mixer and palettes—an

extensive collection of swatches that simulate real-world ink, paint, and plastic colors on

your monitor to match the colors manufacturers use from Pantone and other vendors The

following sections explore how to “mix it up” with the other tabs on the Uniform Fill dialog

Using Color Mixers

Color mixers provide ways to create as many coordinated colors as you need automatically

Anytime you find yourself choosing a color in CorelDRAW’s Color dialog, you have access

to the color mixers Mixers create colors using “color harmonies” and color blend tools

Select any object in your document, and pressSHIFT+F11to open the Uniform Fill dialog;

then click the Mixers tab

Mixing with Color Harmonies

Click the Options button at the bottom of the Mixers tab dialog shown in the next illustration,

and choose Mixers | Color Harmonies This is the default mixing type for Mixers The term

color harmony means that the color spectrum is organized using equal emphasis—equal

space is devoted—on each color of the spectrum Think of color harmonies as organization

in the same way that color models show structure To arrive at several colors that work well

together in a composition is a manual task; no computer program can decide which colors

work well together for you The harmonies mixer features a color wheel and control handles

you drag to choose which hue you want to make variations from, and which other hues, if

any, should be used to create variations Again, the color mixer creates variations you can

choose from and can display other hues that have a math relationship to your chosen hue, and

the related hues can be used to generate their own variations However, the mixer is a mixer; it

does not generate a “Oh, these colors all work together well in a drawing” color palette

Use the Model drop-down selector to choose a color model on which to base a collection

of color variations you can save Choose one of the configurations from the Hues drop-down

list, and then click-drag to rotate the color wheel markers to alter the collection of swatches

displayed at bottom left Choose from Primary, Complementary, Triangle (1 and 2), Rectangle,

or Pentagon hues to create color markers that move as you change the primary hue marker

around the color wheel; the related color markers range from a single point to five points

Use the Variation drop-down selector to choose among Cooler, Warmer, Lighter, Darker, and

Less Saturated “children” of the target color you’ve defined on the color wheel If you want

a preference in your mix of a certain hue—and you’ve chosen Triangle, Rectangle, or Pentagon

from the Hues drop-down—you can favor certain hues over others around the wheel

17

Reshape polygon to shift hues

away or toward target hue.

Color Relationships

It is through color harmonies that you can better see the relationships between primary, secondary, and complementary colors In the additive color model, the primary colors are red, green, and blue Complementary colors are the color opposites of primaries and lie at 180 degrees in opposition on a color wheel of hues For example, the digital complementary color of Red is Cyan; the opposite of Blue is Yellow; and these complements are largely responsible for the A and B color channels in the LAB model, discussed earlier in this chapter Secondary (additive) colors are the result of mixtures of two primary colors: Red + Green yields Yellow, Green + Blue produces Cyan, and Red + Blue produces Magenta, which is the basis for the CMYK (subtractive) color model It should be noted, however, that color harmonies, relationships that are described based on math, are not necessarily the sort of “harmony” you think of when designing a scheme, for example, for the living room The “color explorer” utilities you can download online

Here is a set of steps you can use to gain experience with the features of the color

mixer’s Color Harmonies mode

Experimenting with Color Harmonies

1. You might not want to mess up the default Color Palette in your workspace, so before

exploring mixers, create a new palette: click the menu options button on the default

palette, as shown at left in the following illustration, and then choose Palette | New

When prompted for a new palette name, name it “Test” or anything you’ll remember

17

typically do exactly what CorelDRAW’s mixer does Usually showing only contrasting

colors (color opposites, complementary colors), color mixers have no intelligence; they

describe only relationships between hues, and therefore can choose, for example, college

sports team colors, but you truly have to use your own mind’s eye when designing an

eye-pleasing palette of colors to use in your work.

In RGB, the complementary color of Red is Cyan Quoting from Wiki:

In the RGB color model (and derived models such as HSV), primary colors and

secondary colors are paired in this way:

● red and cyan

● green and magenta

● blue and yellow

However, in art and design, complementary colors are defined differently Using

Wiki again:

Because of the limited range of colors that was available throughout most of the

history of art, many artists still use a traditional set of complementary pairs,

including:

● white and black

● red and green

● blue and orange

● yellow and violet

(from http://en.wikipedia.org/wiki/Complementary_color)

2. With an object selected on the page, open the Uniform Fill dialog (SHIFT+F11), click the Mixers tab, and choose Options | Mixers | Color Harmonies Choose a color model from the Model drop-down menu

3. Choose a Hue type—in the illustration shown next, Triangle1 is selected A four-pointed rectangle shape appears around the color wheel Click-drag the black marker

to change hue, and click-drag the white markers to reshape the rectangle Triangles and other multi-point harmonies can be reshaped, too By making the rectangle wide and short, you narrow the range of complementary colors to red (the selected color); yellows, greens, and violets are eliminated from the mixer swatches, in preference for cyans and blues

4. Choose a Variation type to change the swatch collection below the color model, based on the color marker positions on the model If you choose None from the Variation drop-down list, only one color per marker appears in the collection, and the Size slider is dimmed In the case of the Rectangle harmony, four markers appear

5. Choose a Variation other than None, and then choose a Size for your collection using the Size slider control Choose up to 20 different variation colors per marker

New palette

6. Work on this color collection using different harmonies and variations until you

arrive at something you think you’ll use in the future

7. To save the collection now to the palette you created in step 1, click the first color

well (the color swatch), and thenSHIFT-click the last color well to select them all

Alternatively, if you have some colors you feel are useless,CTRL-click only the

valuable color wells Highlighted color wells take on a bevel-edge highlight

8. With your colors selected, click the down arrow to the right of the Add To Palette

button, and then choose your palette You’re not done yet: click the Add To Palette

button, and your collection of colors is saved to your custom color palette

9. At any time, you can add a color directly to the custom palette by dragging a filled

object into the palette, whether it is docked or not You can also rearrange the order

of colors by dragging from one position on the palette, and then releasing the swatch

when it’s over its desired position

To add an object’s fill and its outline color at the same time to a custom palette,

drag the object aboard the palette A shape with a fountain fill can also add colors

to a custom palette For example, a four-color multi-step fountain fill will add its

four primary color transition points to the custom palette if you drag the object onto

the palette.

Mixing with Color Blend

The Color Blend mixer (shown in the following illustration) is the other mode of the Mixers

module, where you define colors almost literally by mixing them, very much like when you

create a multi-stage fountain fill You can choose four different colors and then generate a

collection of up to 1,024 unique values, and then choose the ones you like to create your

17

Drag a filled object over the palette to add its color.

Save selected color wells

(swatches) to new palette.

around your tastes, you use the Mixers module.

To access the Color Blend feature from within the main Uniform Fill dialog while you’re

on the Mixers tab, choose Options | Mixers | Color Blend

Here’s how to work the Color Blend feature to create a small collection, and then to choose the colors you want to save as a palette

Using the Color Blend Mixer

1. Create an object, select it, and then double-click the Fill Color button on the status bar to open the Uniform Fill dialog

2. Click the Mixers tab and then choose Options | Mixers | Color Blend

3. Choose four colors for your blend by clicking each of the four color selectors in view and choosing a color from the palette displayed You do not need to blend from four colors: you can choose the same color from two or more of the flyout palettes to home in on a range of colors, making your decisions easier Each time a selector is changed, the color field changes, as do the available colors from which to choose

4. Choose a Size for your collection using the Size slider control.

5. Save some of the more useful colors to a palette; let’s use the palette you saved in

the previous tutorial Remember that if you’ve got some eye-pleasing colors in the

collection, you don’t have to save a huge, all-inclusive collection; you can create

shades of your favorite colors on-the-fly using the child colors feature covered

earlier in this chapter.CTRL-click on the color wells in the collection to select only,

let’s say, your eight favorite colors See the following illustration

6. Choose a palette from the drop-down list, and then click the Add To Palette button

Your color blend collection is saved

Using Fixed and Custom Palettes

A fixed palette is a collection of ink colors prepared by an ink manufacturer, such as a specific

process or spot color Because these color specialists have spent a good deal of time preparing

combinations of inks and other pigments to match as closely as possible between your monitor’s

display and how the colors look on real-world packaging and other goods, you don’t edit these

colors as you can with models and mixers However, if you choose a collection made up of one

solid ink color (not a process color) such as Pantone Solid Uncoated, you can specify a Tint of

17

such as Pantone, Trumatch, and Focoltone have supplied color simulations for CorelDRAW users You might use only one color collection, but you have a wide variety from which to choose, and these simulations are as faithful in the “What You See Is What Will Print” arena

as technology can bring you today

Using Fixed Palettes

Some of the palettes are for use in commercial print—they provide simulations for metallic inks, inks that will be printed to coated or uncoated stock (in English: glossy and matte finishes), and so on Other palettes you’ll find in this area of uniform fills are geared for the Web and not for print The World Wide Web has color specifications, too Using a specific color palette usually ensures that colors you use in a design fall within the capabilities of the reproduction or display technique used to show off your work

To apply process color values (CMYK, usually, although Pantone Hexachrome fixed-palette inks use six values) to your work, the very first thing you do is talk with the commercial press operator They might want to use substitution values (less expensive inks), or they might not even own the physical equipment to reproduce Hexachrome You always work backwards when your final output is to be printed—you find out what can be reproduced on what budget, and then you choose your colors Here’s a short tutorial on how to specify a color from the Palettes list

Choosing Predefined Colors for Print

1. With an object selected on the page, in the Uniform Fill dialog (pressSHIFT+F11), click the Palettes tab

2. Choose a palette from the Palette drop-down menu Colors appear in the main selector window, and you can pick swatches by clicking them; their names appear in the Name list at bottom right You can more quickly thumb through colors by choosing Options | Show Color Names; the selector window changes from swatches to larger color samples with the name in the center of the color The vertical selector to the right of the selector

window lets you navigate through the available colors very quickly.

3. Click the color you need

4. If you’ve chosen a process color collection, the Tint slider is unavailable However, if

you’ve picked a Metallic, Pastel, or other solid color collection, choose a percentage

value for your color by using the Tint option By default, tints of selected colors are set

to 100 percent of the ink, but you can specify any value between 0 and 100 percent However, choosing zero for a Tint just changes the chosen color to white; printing white on white paper probably won’t earn you big bucks with your client!

5. Click OK to apply the palette color or a tinted value of the color

Information about the Palettes You Can Use for Printing Assignments

Here’s a quick rundown on each of the commercial palettes you can choose in the Palettes

tab of the Uniform Fill dialog:

● SVG Colors This collection was designed to address the need for standardized

colors for Scalable Vector Graphics (SVG), an emerging technology that allows

designers to post vector images as vector images (and not bitmaps) on web pages

These colors were agreed upon by the W3 Consortium

For a chart featuring user-friendly names for SVG colors, visit www.w3c.org/TR/

SVG11/types.html#ColorKeywords.

● Pantone Pantone dominates the publishing industry with its color-matching

system CorelDRAW offers all of Pantone’s color-matching simulations including

coated, uncoated, and matte color versions for solids, as well as process and

Hexachrome colors CorelDRAW also features Pantone’s metallic, GoeBridge,

Color Bridge, pastel, solid-to-process EURO, and process-coated EURO palettes

● HKS (Hostmann, Kast, and Schmincke) This palette collection uses CMY

components that occasionally (depending on the color) don’t require a black plate

The HKS collections use a Euroscale color space, ISO 12647:2 2002, the FOGRA

standard If you’re a Westerner, you probably won’t use this color collection HKS

palettes include HKS Colors, HKS E, HKS Z, HKS N, and HKS K

● Focoltone This 750-color palette was designed from the ground up to be ICC

compliant If your commercial printer supports Focoltone (an abbreviation for

“Four-color tone”), your client insists on color consistency between printed material

and packaging, and you, the designer, need some flexibility in choosing colors and

tints, you might want to try this collection

● Trumatch The Trumatch process-color palette is made up of more than 2,000

printable colors Trumatch has specifically customized its color-matching system to suit

the digital color industry by using the Computer Electronic Prepress System (CEPS)

The palette has 40 tints and shades of each hue Black is varied in 6-percent increments

● Web Safe The Web Safe Palette contains the 216 colors of the Web Safe color

model Colors are defined using the hexadecimal scheme; one of the six shades of each

color (red, green, and blue) is combined together to create each color in the palette

● TOYO and DIC The TOYO and DIC color-matching systems are widely used

throughout Asia—Japan, in particular Each system contains its own numbering

system and collection of different process colors The TOYO collection of colors has

been developed using its own process ink colors The DIC (Dainippon Ink and

Chemicals, Inc.) brand of process color inks is divided into three categories: DIC,

DIC Traditional, and DIC Part II

17