Sc-Sj1000M User Manual V1.0.5_20210210 (2).Pdf

AUDS User Manual of SC SJ1000M version：V1 0 5 Disclaimer ● This manual may contain inaccuracies, discrepancies in the operation of product functions, or typographical errors ● Our company will update[.]

User Manual of SC-SJ1000M

version：V1.0.5

● This manual may contain inaccuracies, discrepancies in the operation of product functions, or typographical errors.

● Our company will update the contents of this operation manual according to the enhancement and change of product functions, and update the description of this manual regularly The updated information will be reflected in the latest version of this manual without prior notice.

● Due to our continuous use of new technology, product parameters are subject to change without prior notice.

● This manual is only for customers reference and guidance, does not guarantee that it is completely consistent with the real products, the actual application is subject to the real products

● The parts, components and accessories mentioned in this manual do not represent the standard configuration of the equipment The specific configuration is subject to the packing list.

● All the text, forms and picture information in this manual are protected by the relevant laws of the country, and shall not be used without permission.

● The copyright and final interpretation right of this manual belong

to our company

1、Matters of Attention 4

2、product overview 5

2.1 Product composition 6

2.2 Working principle 7

2.3 Functional features 8

2.4 Technical parameters 9

3 User Guide 10

3.1 Equipment Checking before use 10

3.2 Self-inspection after turn on 10

3.3 Target Detection 11

3.4 Target interference 11

3.5 image forensics for Target 11

3.6 power off 12

3.7 Device charging 12

3.8 APP connection 12

4、Equipment Size 13

4.1 host size 13

5、APP user guide 13

6、Simple fault disposal 16

7、After-sales service 17

1、Matters of Attention

Thank you for using our products In order to use this product better, please read this manual carefully before using it Please keep this manual properly so that you can refer to it at any time in the future Please use this product correctly on the basis of fully understanding the contents of this manual

Warning

 This device is used to emit high intensity electromagnetic waves, which may affect the operation of electronic medical equipment Therefore, this device is prohibited to be used in medical-related areas

Matters of Attention

 In the process of transportation, storage and installation, should prevent heavy pressure, violent vibration and flooding, otherwise it will cause equipment damage

 In outdoor installation, please install lightning protection facilities, and reliable grounding in accordance with the relevant specifications;

 Before installation, please confirm that the selected power supply meets the voltage and power requirements of the equipment;

 Before installation, please confirm that the selected power supply meets the voltage and power requirements of the equipment;

 Please make sure that the main power switch of the equipment is turned off before connecting and disconnecting the input and output cables of the equipment to avoid injury to personnel and damage to the equipment

 Please protect the input and output power lines to avoid personnel injury and equipment damage caused by leakage or short circuit

 Fixed platform bearing capacity is not less than 50Kg if selected for fixed installation ；

 This device is only for the purpose of expelling the unmanned aerial vehicle If any property damage, personal injury and legal liability are caused, the manufacturer has nothing to do with it

 This equipment is used to emit high intensity electromagnetic waves Please use this equipment carefully in areas sensitive to electromagnetic waves or near equipment with high sensitivity to receive electromagnetic waves signals This device may cause some electronic devices based on WiFi and Bluetooth to fail to work properly

 Please do not disassemble the internal devices of the jammer by yourself There are no internal parts that can be repaired by the user The relevant maintenance work must be carried out by our company's authorized maintenance personnel, do not dismantle or modify the equipment in any way, the company is not responsible for the problems caused by unauthorized modification or maintenance

2、product overview

In recent years, unmanned aerial vehicle (UAV) market developing rapidly, as the large-scale research and production of UAV manufacturers, makes the civil UAV popularity is higher and higher, however the management for UAV especially the "black flies" is still in the stage of development Meanwhile, small interference devices are increasingly favored by the market, emitting electromagnetic waves to suppress interference, the interference devices can make aircraft landing and return to flight home However, at the same time, there is no warning function of interference single device, which can only be found by the personnel on duty, resulting in low efficiency of disposal

Aiming at such low airspace high security demand, the product SC-SJ1000M has its perception, machine intelligence, all interconnected "fusion" is the design idea, and help customers to create the industry's first software defined frequency & integrated detection portable jammer, for the user to complete the task smoothly

SC-SJ1000M integrated detection and strike jamming equipment Wireless electrical detection can realize and warning of UAV early, and provide the approximate orientation information of UAV, so as to guide the personnel on duty to set the direction of jamming and improve the jamming efficiency It can

be widely used in the low-altitude control demand of public security, judicial, airport, petrochemical oil depot, electric power, nuclear power, border defense, intelligent military barracks and other important areas

2.1 Product composition

FIG 2-1 SC-SJ1000M

SC-SJ1000M is mainly composed of receivers, jammers, receiving and transmitting antenna components, battery components, extension component composition The receiver receives ambient RF signals through antenna, analysis of unmanned aerial vehicle spectrum and trigger the alarm signal, The duty person found the alarm signal, access to the largest possible direction by target alarm signal via mobile devices, and then triggers the jammer, jammer transmit directional radiation effectively for the UAV signal interference

1）Receiver: Receives the signal from the front-end antenna, and analyzes the UAV target signal through intelligent sensing signal processing

2）Jammer: The jammer generates a specific frequency bandwidth modulation signal, outputs it to the transmitting antenna through a high-efficiency power amplifier, radiates it into the free space, and conducts electromagnetic interference on a specific target In the jammer, there is a self-defined frequency band, and the user can set the interference frequency according to the actual situation

3）Antenna assembly: The assembly is composed of a directional antenna, which can receive and transmit electromagnetic signals directionally

4）Battery components: As the power supply device for the devices, battery components have high energy density and high stability The 18650 cell is designed to provide long power supply to the device

5) Extension components: Extension components include terminal mounting bracket, sights and other extension components which can be installed by the user

6) Terminal APP: Terminal APP is the local display and control center of the integrated equipment It mainly realizes the functions of UAV target and alarm, equipment parameter setting, image forensics and so on The terminal device

is connected to the device via a Type-C data line

2.2 Working principle

SC-SJ1000M receiving electromagnetic wave signal interference equipment, found that invasion of target, early warning, at the same time, through different direction to wave signal strength to realize the goal direction, after confirm the target direction, start the electromagnetic wave interfered signal on data receive channels to suppress unmanned aerial vehicles (UAV) and stop till interfering signal received, the power amplifier to stop working, strong interference signal disappears

The UAV will lose its positioning and navigation functions When the UAV's

GPS receiver is suppressed, the UAV will be unable to control When the remote control signal of the UAV is suppressed At this time, the UAV will return

to the take-off point or crash land to the current position

2.3 Functional features

After the device starts the interference signal, it will automatically call the camera of the terminal device (mobile phone) to shoot video The target recognition algorithm is integrated into the terminal APP to facilitate law enforcement and forensics

 Equipment support radio detection & interference integration

 Radio detection can give fuzzy position、the frequency、the models of the UAV

 The battery structure of the device can be removed which is convenient for quick replacement The battery can be charged externally, and the charger can also be inserted into the device for charging

 Interference function covers a wide frequency range：0.4-2G, 1.52-1.62G, 2.4-2.48G, 5.725-5.850G frequencies, 0.4-2G band is a software defined frequencies, using broadband design ideas, broadband power amplifier is covered 0.4-2G spectrum can be realized via broadband digital sweep frequency source

 Human-computer interaction design，the built-in OLED display screen can display UAV and battery status information, such as the equipment support audible and visual alarm indication, indicating equipment in the different working condition

 Device support Type-C interface, can connected to the mobile terminal (Android) through the USB cable Through the terminal APP, the working parameters of the device can be queried and set, and the mobile terminal video shooting and obtaining function can be triggered by interference

 Device can through the mobile terminal 4G networks, the command platform can get real-time position 、 attitude orientation, working status

information of device by 4G networks.

 Equipment support automatic intelligent mode, detect the frequency point

of UAV and trigger the interference automatic selection corresponds to the spectrum

 Device can add the sights, infrared apparatus and other auxiliary parts, precision strike

 Compact equipment design, small size, the weight within 3 kg

 Green safety: equipment disposal of short time with low transmission power, small impact on the electromagnetic environment, equipment in the system to detect UAV target only after work, the rest of the time in standby state

2.4 Technical parameters

1) Detection part:

Detection spectrum: 2.4 - 2.48 GHz; 5.725 - 5.85 GHz;

Detection range: ≥ 1.5km;

Horizontal direction range: 360 °;

Direction precision probability: ≤ 45 °;

Antenna gain: ≥ 6 dbi;

Receiver frequency range: 0.1- 6 GHz;

Receiver sensitivity: ≤ - 120 Dbm;

Instantaneous bandwidth: ≤ 56 MHz;

2) Interference parts:

Interference spectrum: 0.4- 2 GHz (UHF), 1.52-1.62 GHz (L), 2.40-2.50 GHz (S), 5.70-5.90 GHz (C);

Amplifier Power: 40dBm±1dB(UHF)、35dBm±1dB(L) 、42dBm±1dB(S)、 40dBm±1dB(C);

Antenna gain: 6 dbi (UHF), 9 dbi (L), 11 dbi (S), 11 dbi (C);

Interference Range: > 1 km (Suppression ratio 10:1);

Interference Scope: pitch + 20 ° & level + 20 °;

Interference reaction time: < 5 s;

Interference success rate： > 95%；

3）The Host parameters:

Battery 22.2 V, Power supply, 65000 mAh;

Continuous working time: > 1 h;

Standby time:>6h;

Machine weight: 3.5 Kg or less (including battery);

Communication interface: Type C / USB;

Protection grade: IP54

Working temperature and humidity: - 20℃ ~ 60℃, 95%;

3 User Guide

3.1 Equipment checking before use

Before using the device, check the battery power of the device by pressing the button on the battery surface, as shown in figure 3-1：

If the battery power is less than 20% (1 grid ), it is recommended to use it after charging After checking the normal battery level, open the battery bin, put into the battery, and close the battery cap

Fig 3-1

3.2 Self-inspection after turn on

Press the power button and the device will be powered on automatically Observe the indicator panel of the device and all the lights will stay on After the device is started, the indicator panel and the indicator of the device status will flash green, and the LED screen will display the self-check status interface

3.3 Target Detection

After the normal initialization, the device entered the detection mode After the device finds the UAV target, the status indicator of the device flashes blue Color, while displaying the drone's target information on the LED screen The target direction is roughly confirmed by comparing the amplitude of different incoming wave direction after the equipment alarm

The device reports alarm for the first time when on Position A, then turn the device clockwise to 90° to Position B If the amplitude is lower (B<A), turn it counter-clockwise 180° to Position C, if the amplitude of Position C is also lower(C<A), then the UAV can be confirmed in the vicinity of Position

3.4 Target interference

Electromagnetic interference is carried out on the target UAV The target jamming communication frequency band is selected through the Knob, and the target jamming navigation Frequency band is selected by GNSS button, all selected frequency information will be displayed on LED panel After the jamming frequency band is selected, the target is roughly oriented and effective jamming is performed by pulling the trigger.。

3.5 image forensics for Target

Image forensics function supports two modes: Trigger mode and APP operation mode Trigger mode is that after the device interference triggers, the APP will automatically start recording and stop recording after the interference

is stopped The APP mode is that click the video function button in the APP to realize the image forensics function The mode of interference trigger is turned on by default If you want to turn it off, you can set the mode to cancel in the APP

Figure 3.5：Target Forensics

3.6 power off

After normal use of the device, turn off the power button of the device to enter the shutdown state

3.7 Device charging

Device charging supports the device to connect directly to the charger to charge the battery If the device is turned on, the battery's power and charging status can be seen in real time on the LED screen, or the battery can be taken out and charged separately Compatible with unified charging interface

3.8 APP connection

The TypeC interface of the device indication panel supports communication with mobile phone Connect the device and mobile phone terminal through the switch wire Under normal connection, the mobile phone will be upgraded while charging and USB debugging option will pop up, as shown in the figure below Select the file to be transferred Next, open "USB Shared Network" in the interface of mobile network sharing Settings, and click the APP icon to enter the software interface