Bsi bs en 62090 2017

1 4.4 Data semantic an f ormats defined by the data identif iers... 2 C.4 Implementation of prod ct to internet commu ication by help of P2P data identifier “3 L”... PRODUCT PACKA GE LA

Trang 1

Product packag e labels for electr onic

Trang 2

National foreword

This British Stan ard is the UK implementation of EN 6 0 0:2 1 It

is identical t o IEC 6 0 0:2 1 It upe sedes BS EN 6 0 0:2 0 , w hich

is with rawn

The UK p rticip tion in it pr p ration was entrust ed t o Te hnical

Committ ee E L 5 1, Ele tronic As embly Te h olo y

A l s of org nizations r pr sent ed on this committ ee can be o tained on

r q es t o it se r tary

This publ cation does not purp rt t o inclu e al the ne es ary pro isions

of a contract Use s ar r sponsible for it cor e t a plcation

Publshed b BSI Stan ards Limit ed 2 1

ISBN 9 8 05 0 9 42 0

ICS 3 2 0;3 040.5 ; 3 1 0

Compl ance with a British Standard cannot co fer immunity from

le al o lg tio s

This British Stan ard was publ shed u de the a uthority of the

Stan ards Polcy an Strat eg C mmitt ee on 3 July 2 1

Amendments /cor ig en a is ued since publ catio

Trang 3

Produc t pac k age labels for elec t ronic c omponent s using bar

code and t wo- dimensional symbologies

Etik ett en für Verp c k un e ele t ro is h r Ba eleme t e

u t er Anwe d n v on St ric c dieru g u d

zw eidime sio aler Symb lo ie

(IEC 6 0 0:2 17)

This Euro e n St an ard wa a prov ed b CENELEC o 2 17-0 - 6 CENELEC memb rs are b u d to c mply wit h t he CEN/ CENELEC

Int ern l R eg lat io s whic stip late t he c n itio s for givin t his Euro e n St an ard th st at us of a n tio al sta d rd with ut a y lt erat io

Up-t o-d t e lsts a d biblo ra hic l refere c s c n ernin s c n t io al st an ard ma b o tain d o a plc tio to th CEN-CENELEC

Ma a eme t Ce t re or t o a y CENELEC memb r

This Euro e n St an ard e ist s in thre oficial v ersio s (En ls , Fre c , Germa ) A v ersio in a y ther la g a e ma e b t ra slatio

u d r th re p n ibi t y of a CENELEC memb r int o its own la g a e a d n t ifie to t he CEN-CENELEC Ma a eme t Ce t re h s th

s me st atu a th oficial versio s

CENELEC memb rs are th n tio al elec t rot ec nic l c mmitt ee of Austria, Belgium, Bulg ria, Cro t ia, Cy pru , t he Cz ec R ep blc,

De mark , Est onia, Finla d, Former Y ug sla R ep blc f Ma e o ia, Fra c , Germa y , Gre c ,Hu g ry , Ic la d, Irela d, It aly, L tv ia,

Lith a ia, L x mb urg,Malta,th Neth rla d , Norway , Pola d, Port ug l R oma ia, Serbia,Slov akia,Slov enia, Sp in,Swe e ,

Swit zerla d, Turk ey n t he Unit ed K in d m

Europea n Commit tee for Ele t rotechnica l Sta nd a rd iza tio

Comité Europé n d e Norma lisa tio Ele trotech niq ue

Europä isches Komitee für Elektrote h nische Nor mu ng

CEN-CENE EC Management Ce nt re:Av en e Marnix 17, B-10 0 Brus els

Trang 4

European forew ord

The t ex t of doc ment 91/13 4/CDV , fut ure edition 2 of IEC 6 0 0, pre ar ed by IEC/TC 91 "Elect ronic

as embly t ec nolog " w as s bmit t ed t o t he IEC-CENELEC p ralel v ot e an a prov ed by CENELEC

as EN 6 0 0:2 17

The folowin dat es are fix ed:

• lat est date by whic the doc ment has t o b

implement ed at nat ional level by

publcation of an ident ical nat ional

st an ard or by en orsement

(do ) 2 18-0 -16

• lat est date by whic the national

st an ard conflct in w it h the

doc ment hav e to b with raw n

(dow) 2 2 -0 -16

This doc ment s p rsedes EN 6 0 0:2 0

At t ent ion is dr awn to t he p s ibi ty t hat some of t he element s of t his doc ment may b the s bject of

p t ent rig t s CENELEC s al not b held resp n ible for ident ifyin an or al s c p tent r ig t s

Endorsement notice

The t ex t of t he International St an ard IEC 6 0 0:2 17 w as a proved by CENELEC as a Euro e n

St an ard w ithout an modificat ion

IEC 6 19 NOT Harmo iz d a EN 6 19

IEC 6 2 6- NOT Harmo iz d a EN 6 2 6-

IEC 6 2 6-2 NOT Harmo iz ed a EN 6 2 6-2

IEC 6 2 6-3 NOT Harmo iz d a EN 6 2 6-3

IEC 617 0-4 NOT Harmo iz d a EN 617 0-4

ISO/ IEC 15 16 NOT Harmo iz ed a EN ISO/ IEC 15 16

ISO/ IEC 15 3 NOT Harmo iz ed a EN ISO/ IEC 15 3

ISO 316 - NOT Harmo iz ed a EN ISO 316 -

Trang 5

Annex ZA

(normat ive)

Normative references to international publ cations

with their cor esponding European publ cations

The folowin doc ment s, in whole or in p rt , are normat iv ely referen ed in t his doc ment an are

in isp n a le for it s a plcat ion F r dat ed referen es, only t he edit ion cited a ples F r u dat ed

referen es, t he lat est edit ion of t he referen ed doc ment in lu in an amen ment s) a ples

NOT 1 Wh n a Int ern t io al Pu lc t io h s b e mo ifie b c mmo mo ific t io s, in ic t ed b (mo ), th relev ant

EN/ HD a ple

NOT 2 Up-t o-d te informatio o t he lat est v ersio s of t he Euro e n Sta d rd lst ed in t his a n x is av aia le h re:

w ww.c n le e

ISO 8 01 - Dat a element s an int erc an e format s -

Informat ion int erc an e - Re resentat ion

of dat es an times

ISO/IEC 15 17 - Informat ion tec nolog - Aut omat ic

ident ification an dat a ca ture t ec niq es -

Code 12 b r code s mb log

sp cificat ion

GS1 Ap lcation Identifiers an ASC MH10

Dat a Ident ifiers an maint enan e

Sy t ax for hig -ca acity A DC media

ISO/IEC 15 5 series Informat ion tec nolog - Aut omat ic

Uniq e ident ification

Dat a Mat rix b r code s mb log

sp cificat ion

Code 3 b r code s mb log sp cificat ion

QR Code b r code s mb log sp cificat ion

ident ification an dat a ca ture (AIDC)

t ec niq es - Harmoniz ed voca ular y

ANSI MH 10.8.2 - Dat a Ident ifier an Ap lcat ion Identifier

St an ard

Trang 7

FOREWORD 4

1 Sco e 6

2 Normative ref eren es 6

3 Terms an def i ition 7

4 L b l data content an req irements 7

4.1 Data elements – general 7

4.2 Man atory data elements 8

4.2.1 Man f acturer item identif i ation – DI “1P” an “2 P” 8

4.2.2 Cu tomer prod ct code – DI “P” 8

4.2.3 Man f acturer identification – DI “18V” an “21V” 8

4.2.4 Quantity – DI “Q” an “7Q”

8 4.2.5 Trace bi ty identif i ation – DI “S” an “2 S”, “1T” an “2 T” 9

4.2.6 Cou try of origin – DI “4 ” 9

4.2.7 Prod ction date – DI “16D” 9

4.2.8 Pac age identification – DI “J” an “3S” 9

4.3 Optional data elements 10 4.3.1 Expiration date – DI “14D” 10 4.3.2 Revision level – DI “2P” 10 4.3.3 EIAJ ID – DI “3N” 10 4.3.4 Man f acturer location – DI “2 L” 10 4.3.5 Cu tomer as ig ed s p l er code – DI “V” 10 4.3.6 Moisture sen itivity level – DI “13E” 1

4.3.7 URL – DI “3 L” an “3 L” 1

4.4 Data semantic an f ormats defined by the data identif iers 1

4.5 Data re resentation 13 4.5.1 General f ormat in 13 4.5.2 General f ormat in f or mac ine- e da le s mb ls 14 4.5.3 General f ormat in f or h man- e da le information 14 4.6 Data car ier selection 15 4.6.1 Line r b r code s mb ls 15 4.6.2 Two-dimen ional (2D) s mb ls 16 4.7 L b l size, layout, an location 17 4.7.1 L bel size 17 4.7.2 L bel layout 17 4.7.3 Examples of la el an la el layout 17 4.7.4 L bel location 18 An ex A (informative) Qual ty asp cts of la els – Ad esive c aracteristic an d ra i ty of markin 2

A.1 General 2

A.2 Recommen ation 2

A.2.1 General 2

A.2.2 Ad esion c aracteristic 2

A.2.3 Use an protection 2

A.2.4 Storage con ition 21

A.2.5 Dura i ty 21

A.2.6 Blan la el stoc contamination 21

Trang 8

A.3.1 Ad esive stren th 21

A.3.2 Blan la el stoc contamination 21

A.3.3 Rec cla i ty 2

An ex B (informative) ISO/IEC 15 3 Data Tran fer Sy tax 2

An ex C (inf ormative) URL 2

C.1 General 2

C.2 Prin iple of u in the URL DI “3 L” 2

C.3 Prin iple of u in the P2P URL DI “3 L” 2

C.4 Implementation of prod ct to internet commu ication by help of P2P data identifier “3 L” 2

An ex D (inf ormative) Examples of data element s ort titles 2

An ex E (informative) Pac age levels f or comp nent p c age la els 2

E.1 In er an outer prod ct p c ages 2

E.2 "Unit lo d p c ages" / "han l n u its" / "overp c s" 2

E.3 "Ship in u its" / "tran p rt p c ages" 2

Biblogra h 3

Fig re 1 – L b l with a l ne r b r code, Data Matrix s mb l an h man- e da le information 17 Fig re 2 – L b l with minimum content, Data Matrix an h man- e da le inf ormation 17 Fig re 3 – L b l with minimum content, QR Code an h man- e da le inf ormation 18 Fig re 4 – Typical la el location 19 Fig re A.1 – Ad esion tester 2

Fig re B.1 – Example of en odin data elements in a 2D s mb l 2

Fig re C.1 – Smartphone with P2P Ap f or ac es to P2P information 2

Fig re E.1 – Examples for intimate/in er p c ages 2

Fig re E.2 – Example f or outer p c age with more than one in er p c age 2

Fig re E.3 – Example of "u it lo d " or "han l n u its" or "overp c s" 2

Fig re E 4 – Examples of tran p rt p c ages 2

Ta le 1 – Data identifiers 1

Ta le 2 – Man atory data elements an their re resentation 13 Ta le 3 – Val d combination of re resentation of o tional data elements 14 Ta le 4 – Prod ct p c age la el s mb l req irements − Code 3 15 Ta le 5 – Prod ct p c age la el s mb l req irements − Code 12 16 Ta le C.1 – How to u e the URL DI “3 L” 2

Ta le C.2 – How to u e the P2P URL DI “3 L” 2

Ta le C.3 –ASC DIs u ed for the P2P code example: 2

Ta le D.1 – Examples of data element s ort titles 2

Trang 9

INTERNATIONAL ELECTROTECHNICAL COMMISSION

_

1 Th Intern tio al Ele trote h ic l Commis io (IEC) is a worldwid org niz tio for sta d rdiz tio c mprisin

al n tio al ele trote h ic l c mmite s (IEC Natio al Commite s) Th o je t of IEC is to promote

intern tio al c -o eratio o al q e tio s c n ernin sta d rdiz tio in th ele tric l a d ele tro ic f i ld To

this e d a d in a ditio to oth r a tivitie , IEC p bls e Intern tio al Sta d rd , Te h ic l Sp cific tio s,

Te h ic l Re orts, Pu lcly Av ia le Sp cif i atio s (P S) a d Guid s (h re f ter refer e to a “IEC

Pu lc tio (s)”) Th ir pre aratio is e tru te to te h ic l c mmite s; a y IEC Natio al Commite intere te

in th s bje t d alt with ma p rticip te in this pre aratory work Intern tio al g v rnme tal a d n n

-g v rnme tal org niz tio s laisin with th IEC als p rticip te in this pre aratio IEC c la orate clo ely

with th Intern tio al Org niz tio f or Sta d rdiz tio (ISO) in a c rd n e with c n itio s d termin d b

a re me t b twe n th two org niz tio s

2) Th f ormal d cisio s or a re me ts of IEC o te h ic l maters e pre s, a n arly a p s ible, a intern tio al

c n e s s of o inio o th rele a t s bje ts sin e e c te h ic l c mmite h s re re e tatio f rom al

intere te IEC Natio al Commite s

3) IEC Pu lc tio s h v th form of re omme d tio s f or intern tio al u e a d are a c pte b IEC Natio al

Commite s in th t s n e Whie al re s n ble ef forts are ma e to e s re th t th te h ic l c nte t of IEC

Pu lc tio s is a c rate, IEC c n ot b h ld re p n ible for th wa in whic th y are u e or f or a y

misinterpretatio b a y e d u er

4) In ord r to promote intern tio al u if ormity, IEC Natio al Commite s u d rta e to a ply IEC Pu lc tio s

tra s are tly to th ma imum e te t p s ible in th ir n tio al a d re io al p blc tio s An div rg n e

b twe n a y IEC Pu lc tio a d th c re p n in n tio al or re io al p blc tio s al b cle rly in ic te in

th later

5) IEC its lf d e n t pro id a y ate tatio of c nf ormity In e e d nt c rtific tio b die pro id c nf ormity

a s s me t s rvic s a d, in s me are s, a c s to IEC mark of c nf ormity IEC is n t re p n ible f or a y

s rvic s c rie o t b in e e d nt c rtif i atio b die

6) Al u ers s o ld e s re th t th y h v th late t e itio of this p blc tio

7) No la i ty s al ata h to IEC or its dire tors, emplo e s, s rv nts or a e ts in lu in in ivid al e p rts a d

memb rs of its te h ic l c mmite s a d IEC Natio al Commite s for a y p rs n l injury, pro erty d ma e or

oth r d ma e of a y n ture wh ts e er, wh th r dire t or in ire t, or for c sts (in lu in le al f ee ) a d

e p n e arisin o t of th p blc tio , u e of, or rela c u o , this IEC Pu lc tio or a y oth r IEC

Pu lc tio s

8) Ate tio is drawn to th Normativ refere c s cite in this p blc tio Us of th refere c d p blc tio s is

in is e s ble for th c r e t a plc tio of this p blc tio

9) Ate tio is drawn to th p s ibi ty th t s me of th eleme ts of this IEC Pu lc tio ma b th s bje t of

p te t rig ts IEC s al n t b h ld re p n ible f or id ntif yin a y or al s c p te t rig ts

International Stan ard IEC 6 0 0 has b en pre ared by IEC tec nical commite 91:

Electronic as embly tec nolog

This secon edition cancels an re laces the first edition publs ed in 2 0 This edition

con titutes a tec nical revision

This edition in lu es the f ol owin sig if i ant tec nical c an es with resp ct to the previou

Trang 10

The text of this International Stan ard is b sed on the fol owin doc ments:

Ful inf ormation on the votin for the a proval of this International Stan ard can b f ou d in

the re ort on votin in icated in the a ove ta le

This doc ment has b en draf ted in ac ordan e with the ISO/IEC Directives, Part 2

The commite has decided that the contents of this doc ment wi remain u c an ed u ti the

sta i ty date in icated on the IEC we site u der "htp:/ we store.iec.c " in the data related to

the sp cific doc ment At this date, the doc ment wi b

• recon rmed,

• with rawn,

• re laced by a revised edition, or

A bi n ual version of this publ cation may b is ued at a later date

IMPORTANT – The 'colour inside' logo on the cov r pa e of this publ c tion indic te

th t it contains colours whic are considere to be us f ul f or the cor e t

und rsta ding of its conte ts Us rs s ould theref ore print this doc me t usin a

colour printer

Trang 11

PRODUCT PACKA GE LA BELS FOR ELECTRONIC COMPONENTS

This doc ment a pl es to la els on the p c agin of electronic comp nents f or automatic

han l n in B2B proces es These la els u e l ne r b r code an two-dimen ional (2D)

s mb ls L b ls for direct prod ct markin an s ip in la els are ex lu ed L b ls req ired

on the p c agin of electronic comp nents that are inten ed f or the retai c an el of

distribution in B2C proces es are also ex lu ed fom this doc ment

Bar code an 2D s mb l markin s are u ed, in general, for automatic identification an

automatic han l n of comp nents in electronic as embly l nes Inten ed a pl cation in lu e

s stems that automate the control of comp nent p c ages d rin prod ction, in entory an

distribution

The fol owin doc ments are ref er ed to in the text in s c a way that some or al of their

content con titutes req irements of this doc ment For dated referen es, only the edition

cited a ples For u dated ref eren es, the latest edition of the ref eren ed doc ment (in lu in

an amen ments) a pl es

ISO/IEC 15 17, Information tec n l og – Aut omatic id entific tion a d d ata c pture

te h iqu s – Cod e 12 b r c de symb lo y sp cific tion

ISO/IEC 15 18, Information tec n l og – Automatic id entific tion a d d at a c pt ure

te h iqu s – GS1 Ap l i ation Id ent ifiers a d ASC MH 10 Data Id entifiers a d maint en n e

ISO/IEC 15 3 , Information t ec n log – Aut omatic id entific tion a d d at a c pt ure

te h iqu s – Synt ax for hig -c p city ADC med ia

ISO/IEC 15 5 (al p rts), I nformation t ec n l og – Automat ic ide tific t io a d dat a c pt ure

te h iqu s – U niqu id entific tio

ISO/IEC 16 2 , Information tec n l og – Automatic id entific tion a d d ata c pture

te h iqu s – Data Matrix b r c de symb l og sp cific tion

ISO/IEC 16 8 , Information tec n lo y – Automatic id ent ific t ion a d dat a c pture

te h iqu s – Cod e 3 b r c d e symb l og sp cificat ion

ISO/IEC 18 0 , I nformation te h ol og – Automatic id ent ific t ion a d d ata c pt ure

te h iqu s – QR Cod e b r c de symb lo y sp cific t ion

ISO/IEC 19 6 , Informat ion te h olog – Aut omat ic Id entific tion a d d at a c pture (AIDC)

te h iqu s – H armo ized v c b l ary

ISO 8 01, Dat a el eme t s a d int erc a g formats – Information interc a g – Re rese

-tatio ofdat es a d t imes

Trang 12

• IEC Electro edia: avai a le at ht p:/ www.electro edia.org/

• ISO Onl ne browsin platform: avai a le at htp:/ www.iso.org/o p

3.1

comp ne t

electronic or electrical p rts (e.g b re printed circ it b ard , integrated circ its, ca acitors,

diodes, electronic mod les, switc es, he t sin s, resistors, electronic/electrical con ectors,

etc.) u ed in a f irst level as embly

3.2

comp ne t pa k g

commercial u it of comp nents def i ed by the s p l er in lu in , if a pl ca le, their me n for

protection, stru tured al g ment or f or automated as embly

Note 1 to e try Ty ic l e ample are s own in Fig re 4

Note 2 to e try For th p rp s s of this d c me t, th term “c mp n nt p c a e” in lu e a multiple of th

eleme ts d picte in Fig re 4, e.g f our re ls in o e b x

3.3

cou try of origin

man facturin cou try where the prod ct o tained its present identity as a p rt, s b s embly,

or finis ed prod ct

Note 1 to e try: Th d finitio of c u try of origin” s o ld b in ln with lo al re ulatio s

4 Label data content and requirements

4.1 Data eleme ts – ge eral

This doc ment al ows mutual agre ments b twe n the s p ler an the c stomer to alter or

en an e any of the sp cif i ation done in this doc ment

The la el format ac ommodates man atory, o tional an mutual y agre d data elements

Examples of data element s ort titles are given in An ex D

This doc ment do s not s p rsede or re lace an a plca le saf ety or reg latory markin or

la el n req irements This doc ment is to b a pl ed in ad ition to an other man ated

la el n req irements The la el n req irements of this doc ment an other doc ments may

b combined into one la el or a p ar as se arate la els

Ap roval an conf ormity markin s, bran in elements an other inf ormation can b ad ed

when a pl ca le Typical y, these are not relevant for automatic proces in , an therefore not

f urther outl ned in this doc ment

The n mb r in lu ed in the c aracter cou t is ex lu ive of overhe d c aracters s c as start

an sto c aracters, data identifiers an an other c aracters req ired by a stan ard

s mb log sp cification for pro erly en oded data

Al data elements en oded in a mac ine- e da le medium s al b preceded by the

Trang 13

The man facturer may ad an data on the la el Ad itional lne r b r codes or data elements

in the 2D s mb l s al u e the a pro riate data identifiers

If the o tional data sp cified in 4.3 are in icated on the la els, they s ould b u ed as

des rib d b low

An f urther ad itional data or sp cific formats or an thin else may mutual y b agre d

b twe n the s p l er an the c stomer Mutual agre ments b twe n tradin p rtners are not

restricted by this doc ment

Data elements where glo al u iq enes is relevant s al f ol ow the ISO/IEC 15 5 series'

rules, or b combined with the ISO/IEC 15 5 series' compl ant comp n ID with data

identifier “18V” an b u iq e within the s o e in this comp n

4.2 Ma d tory data eleme ts

4.2.1 Ma uf acturer item ide tif ic tion – DI “1P” a d “2 P”

The man f acturer as igned item identification is man atory

If “1P” is u ed, the conf ormity to the ISO/IEC 15 5 series is ac ieved by its combination with

the glo al y u iq e comp n ID “18V”

4.2.2 Customer product code – DI “P”

The c stomer prod ct code is the code as ig ed to the prod ct by the c stomer, an may b

tran mit ed together with the order

NOT Cu tomer pro u t c d s o c mp n nt p c a e are relativ ly wid ly a o te But wh n ma uf acturin

o sto k or s l n via distrib tors, this informatio is n t y t k own

Ad in c stomer inf ormatio o th la el is s bje t to a p rc a e a re me t b twe n th s p ler a d th

c stomer If th re is n s e if i p rc a e a re me t, it is u toth ma ufa turer to a d this informatio or n t

4.2.3 Ma uf acturer id ntific tion – DI “18V” a d “21V”

The man facturer identif i ation s al u iq ely identify the man facturer to whic the

comp nent is trace ble

“18V” is the def ault man facturer identif i ation

In case the man facturer’s organizational s b u it is req ired, e.g to in icate a

man facturin location, then DI “21V” is u ed in ad ition to “18V” In case of mutual

agre ment b twe n tradin p rtners, “21V” can b u ed in te d of “18V”

In h man- e da le form, the manuf acturer identification is the ful man f acturer name or its

logo In mac ine- e da le form, the man facturer identif i ation is as ig ed by a recog ized

b d that as ig s comp n identification ac ordin to the ISO/IEC 15 5 series

The h man- e da le man f acturer identification an the mac ine- e da le man facturer

identification are diff erent It is recommen ed that there b a 1:1 relation b twe n h man

-re da le an mac ine- e da le man f acturer identif i ation

4.2.4 Qua tity – DI “Q” a d “7Q”

The q antity s al b the q antity in the p c age or container to whic the la el is af fixed

Trang 14

When a dif ferent u it of me s re is req ired, as agre d b twe n tradin p rtners, data

identifier “7Q” s al be u ed with the q antity f ol owed by two alphan meric c aracters

re resentin the u it of me s rement code def i ed in An ex D of ANSI MH10.8.2

It is recommen ed to u e the q antity with a u it of me s re only if the u it is diff erent f rom

“piece”

Print only the sig ificant digits for the h man- e da le q antity Do not print le din zeros

4.2.5 Tra e bi ity ide tific tion – DI “S” a d “2 S”, “1T” a d “2 T”

The trace bi ty identif i ation s al b as ig ed by the man f acturer This category of

identification in lu es serial n mb rs an lot b tc n mb rs

Trace bi ty identification s ould b either a serial n mb r (u in data identifier “S” or “2 S”

or a lotb tc n mb r (u in data identif ier “1T” or “2 T”

In certain circ mstan es, b th the serial n mb r an the lotb tc n mb r may b s own on

the la el In this case, at le st one of the two s al b en oded in a l ne r b r code an b th

A lot b tc n mb r is a code as ig ed by the s p ler to identify or trace a u iq e group

of entities (e.g man f acturin lot, b tc , in p ction lot The f ormat for the lotb tc n mb r

is to b defined by the man f acturer

4.2.6 Country of origin – DI “4L”

The cou try of origin s al b s own in h man- e da le information u in the f ul cou try

name

This s al b in ad ition to the two-c aracter cou try codes as p r ISO 316 data b in

en oded in a mac ine- e da le s mb l

4.2.7 Production date – DI “16D”

Date code s al b in ac ordan e with ISO 8 01 When en oded in a mac ine- e da le

s mb l, either the data identifiers “10D”, “1 D” or “16D” s al b u ed Preferen e s ould b

Uniq e p c age identification (i.e l cen e plate) s al b in ac ordan e with the

ISO/IEC 15 5 series

Trang 15

If there are several layers of p c ages with a 1:1 relation e c , then the same p c age ID is

to b u ed for the la els on the diff erent levels of p c agin If there is more than one

p c age in a p c age, then there s al b dif ferent p c age IDs

EX MPLE 1 A re l ina dry p c in a piz a b x al h v th s me p c a e ID o th ir re p ctiv la els

EX MPLE 2 Multiple re ls in o e piz a b x e c h v diff ere t p c a e IDs, a d th piz a b x its lf h s a oth r

ID, to

NOT 1 Howe er, a th re is als th u iq e c mp n c d a c rdin to th ISO/IEC 15 5 s rie with d ta

id ntif i r “ 8V” a ma d tory d ta eleme t, glo al u iq e e s c n b a hie e b th c mbin tio of this u iq e

c mp n ID a d a p c a e ID u iq e within th d main of this c mp n with d ta id ntif i r “3S”

NOT 2 Wh n u in “3S”, this eleme t is n t s ite to b u e a primary k y in a RFID ta in c s of uture

RFID markin of th c mp n nt p c a e

4.3 Optional data eleme ts

4.3.1 Expiration date – DI “14D”

An expiration date may b s own on a p c age la el when the p c aged items ne d to b

con umed/proces ed (e.g soldered) b f ore a certain date, when stored u der con ition

defined by the man f acturer

The data f ormat of the expiration date is YYYYMMDD

4.3.2 Re ision le el – DI “2P”

The revision level sp cif ies the revision or version of an item, e.g en ine rin c an e level,

edition, or revision

4.3.3 EIAJ ID – DI “3N”

Data identifier “3N” is a codin stru ture in ac ordan e with the format def i ed by the

Electronic In u tries As ociation of Ja an (EIAJ)

Refer to Electronic Commerce Al an e for Glo al Bu ines Activity (ECALGA) Stan ard

4.3.4 Ma uf acturer loc tion – DI “2 L”

The glo al u iq e location code ac ordin to the ISO/IEC 15 5 series is stru tured as a

seq en e of thre con atenated data elements: the is uin agen y code (IAC), folowed by

the comp n identification n mb r (CIN), fol owed by the ph sical internal location code that

is u iq e within the CIN holder's domain, s al b u ed to identify a man facturer’s location

EX MPLE 1 Usin IA LE (EDIFICE): 2 L EIBMA BCDE

EX MPLE 2 Usin IA U (Du &Bra stre t): 2 LU 12 4 6 8 A BCDE

NOT Th e te sio to th DU S # for diff ere t lo atio s is n t n e e wh n e c lo atio h s its own D NS #

4.3.5 Customer a signe s ppl er cod – DI “V”

Some c stomers u e their own as ig ed codes f or s p l ers, an req ire this information also

on comp nent p c ages

It is to be con idered that a c stomer as ig ed ven or/s p l er code is sp cific f or this one

c stomer L b ls with c stomer sp cif i content cau e ad itional eff orts an c alen es, e.g

in case of prod ction on stoc , distribution via resel ers or c stomer return Some distribution

models may not work when c stomer data is req ired on la els Returnin p c ages with

c stomer sp cific data u ual y wi imply re-la el n Theref ore, u in a c stomer as ig ed

Trang 16

4.3.6 Moisture s nsitivity le el – DI “13E”

The moisture sen itivity level is a clas of time p riod in whic a moisture-sen itive device

can b exp sed to ambient ro m con ition , ac ordin to IPC/JEDEC J-STD-0 0 an

IEC 617 0-4 This is imp rtant inf ormation, esp cial y f or comp nents exp sed to solderin

proces es At le st the moisture sen itivity level s ould b in icated f or s c comp nents

4.3.7 URL – DI “3 L” a d “3 L”

A l n to f urther information ac es ible via the internet f or this sp cif i p c age can b ad ed

in a dedicated data element u in data identifier an cor esp n in data stru ture “3 L”, or

u in the data identifier an cor esp n in data stru ture “3 L” Se An ex C “URL” f or

detais

NOT 1 Th s DIs are u e u o a re me t b twe n th s p ler a d th c stomer

NOT 2 Wh th r a ditio al d ta or informatio is pro id d, wh t kin of d ta a d h w d ta is pro id d, is at th

dis retio of th p rty ownin th d ta

4.4 Data s ma tic a d formats define by th data ide tifiers

Ta le 1 l sts al the relevant data elements sorted by their resp ctive data identifier

Table 1 – Data ide tifiers

Data identif ier Man atory

a sig e b ISO Th c u try of

origin is d fin da th ma uf

ac-turin c u try wh re th pro u t

o tain d its pre e t id ntity a a

p rt, s b-a s mbly, or finis e

Trang 17

Trang 18

On of th d te formats “ 0D”, “ 1D” or “ 6D” s al b u e Alth u h format “ 6D” with “Y Y MMD ” is

re omme d d, th ma uf acturer ma c o s o eof th oth r d te f ormats

Eith r q a tity in f ormat “7Q” or “Q” a ple Refer to An e D of A SI MH10.8.2

4.5 Data repre e tation

4.5.1 Ge eral format ing

Al data elements s al b re resented on the la el as h man- e da le text Man atory data

s al b en oded in a 2D mac ine- e da le s mb l In ad ition, some of the data s ould b

en oded in l ne r b r codes Se Ta le 2

Table 2 – Ma datory data eleme ts a d their repre e tations

Trang 19

Table 3 – Val d combination of repre e tation of o tional d ta eleme ts

Optio al data

elements inclu ed

The maximum s mb l len th of a l ne r b r code s mb l s ould b no more than 8 cm

NOT De e din o th c oic of th s a nin d vic : Only ima ers c n re d 2D s mb ls a d s me ima ers

h v is u s with lo g r ln ar b r c d s

4.5.2.3 Sy ta in l ne r bar code

If l ne r b r codes are u ed, it is stron ly recommen ed not to con atenate them Eac b r

code starts with the a pro riate data identif ier

If con atenation is done, it s al b in ac ordan e with ANSI MH10.8.2 (as referen ed in

A h man- e da le interpretation (HRI) of e c l ne r b r code s mb l s al b provided

adjacent to the b r code Su h h man- e da le interpretation s al re resent the en oded

data Se Fig re 1

The HRI s al re resent the en oded data, ex lu ive of the data identif ier The data identif ier

a p ars in p rentheses as p rt of the data title, e.g “ S) Serial #.”

The HRI of the l ne r b r code s mb l s al b printed a ove the bar code s mb l

For 2D s mb ls, h man tran lation (se 4.5.3.3) s ould b u ed

4.5.3.3 Huma tra slation

In ad ition to the HRI h man tran lation of mac ine- e da le data may b provided in a

Tiêu đề	Product package labels for electronic components using bar code and two-dimensional symbologies
Trường học	British Standards Institution
Chuyên ngành	Standards
Thể loại	Standard
Năm xuất bản	2017
Thành phố	Brussels

Định dạng
Số trang	38
Dung lượng	1,3 MB