Bsi bs en 10250 4 2000

() | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |[.]

Open die steel forgings

for general engineering

purposes Ð

Part 4: Stainless steels

This British Standard, having

been prepared under the

direction of the Engineering

Sector Committee, was published

under the authority of the

Standards Committee and comes

into effect on 15 February 2000

 BSI 02-2000

BS EN 10250-4:2000

Amendments issued since publication

National foreword

This British Standard is the official English language version of EN 10250-4:1999 This British Standard supersedes Table 11 of BS 970-1 which is currently under review.

The UK participation in its preparation was entrusted to Technical Committee ISE/31, Wrought steels, which has the responsibility to:

Ð aid enquirers to understand the text;

Ð present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;

Ð monitor related international and European developments and promulgate them in the UK.

A list of organizations represented on this committee can be obtained on request to its secretary.

Cross-references

The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled ªInternational Standards Correspondence Indexº, or by using the ªFindº facility of the BSI Standards Electronic Catalogue.

A British Standard does not purport to include all the necessary provisions of a contract Users of British Standards are responsible for their correct application.

Compliance with a British Standard does not of itself confer immunity from legal obligations.

7KLV(XURSHDQ6WDQGDUGH[LVWVLQWKUHHRIILFLDOYHUVLRQV(QJOLVK)UHQFK*HUPDQ$YHUVLRQLQDQ\RWKHUODQJXDJHPDGHE\WUDQVODWLRQ XQGHUWKHUHVSRQVLELOLW\RID&(1PHPEHULQWRLWVRZQODQJXDJHDQGQRWLILHGWRWKH&HQWUDO6HFUHWDULDWKDVWKHVDPHVWDWXVDVWKHRIILFLDO YHUVLRQV

&(1PHPEHUVDUHWKHQDWLRQDOVWDQGDUGVERGLHVRI$XVWULD%HOJLXP&]HFK5HSXEOLF'HQPDUN)LQODQG)UDQFH*HUPDQ\*UHHFH ,FHODQG,UHODQG,WDO\/X[HPERXUJ1HWKHUODQGV1RUZD\3RUWXJDO6SDLQ6ZHGHQ6ZLW]HUODQGDQG8QLWHG.LQJGRP

(8523($1 &200,77(( )25 67$1'$5',=$7,21

& 2 0 , 7 e  ( 8 5 2 3 e ( 1  ' (  1 2 5 0 $ / , 6 $ 7 , 2 1 ( 8 5 2 3 b , 6 & + ( 6  2 0 , 7 ( (  ) h 5  1 2 5 0 8 1 *

&HQWUDO6HFUHWDULDWUXHGH6WDVVDUW%%UXVVHOV

3DJH (1

)RUHZRUG

7KLV(XURSHDQ6WDQGDUGKDVEHHQSUHSDUHGE\7HFKQLFDO&RPPLWWHH(&,667&6WHHOIRUJLQJVWKH6HFUHWDULDWRIZKLFKLVKHOGE\%6,

7KLV(XURSHDQ6WDQGDUGVKDOOEHJLYHQWKHVWDWXVRIDQDWLRQDOVWDQGDUGHLWKHUE\SXEOLFDWLRQRIDQLGHQWLFDOWH[WRUE\HQGRUVHPHQWDWWKHODWHVWE\$SULODQGFRQIOLFWLQJQDWLRQDOVWDQGDUGVVKDOOEHZLWKGUDZQDWWKHODWHVWE\$SULO

7KLV(XURSHDQ6WDQGDUGKDVEHHQSUHSDUHGXQGHUDPDQGDWHJLYHQWR&(1E\WKH(XURSHDQ

&RPPLVVLRQDQGWKH(XURSHDQ)UHH7UDGH$VVRFLDWLRQ7KLV(XURSHDQ6WDQGDUGLVFRQVLGHUHGWREHDVXSSRUWLQJVWDQGDUGWRWKRVHDSSOLFDWLRQDQGSURGXFWVWDQGDUGVZKLFKLQWKHPVHOYHVVXSSRUWDQHVVHQWLDOVDIHW\UHTXLUHPHQWRID1HZ$SSURDFK'LUHFWLYHDQGZKLFKPDNHUHIHUHQFHWRWKLV

1HWKHUODQGV1RUZD\3RUWXJDO6SDLQ6ZHGHQ6ZLW]HUODQGDQGWKH8QLWHG.LQJGRP

(1

7KLVSDUWRIWKLV(XURSHDQ6WDQGDUGVSHFLILHVWKHWHFKQLFDOGHOLYHU\UHTXLUHPHQWVIRURSHQGLHIRUJLQJVIRUJHGEDUVDQGSURGXFWVSUHIRUJHGDQGILQLVKHGLQULQJUROOLQJPLOOVPDQXIDFWXUHGIURPVWDLQOHVVVWHHOVZLWKIHUULWLFPDUWHQVLWLFDXVWHQLWLFDQGDXVWHQLWLFIHUULWLFVWUXFWXUHV

127(7KHPDMRULW\RIVWHHOVOLVWHGLQWKLVSDUWRI(1DUHLGHQWLFDOWRVWHHOVVSHFLILHG(1DQGPRUHH[WHQVLYHLQIRUPDWLRQRQSURSHUWLHVLVJLYHQLQWKDW(XURSHDQ6WDQGDUG

*HQHUDOLQIRUPDWLRQRQWHFKQLFDOGHOLYHU\FRQGLWLRQVLVJLYHQLQ(1

 1RUPDWLYHUHIHUHQFHV

7KLV(XURSHDQ6WDQGDUGLQFRUSRUDWHVE\GDWHGRUXQGDWHGUHIHUHQFHSURYLVLRQVIURPRWKHUSXEOLFDWLRQV7KHVHQRUPDWLYHUHIHUHQFHVDUHFLWHGDWWKHDSSURSULDWHSODFHVLQWKHWH[WDQGWKHSXEOLFDWLRQVDUHOLVWHGKHUHDIWHU)RUGDWHGUHIHUHQFHVVXEVHTXHQWDPHQGPHQWVWRRUUHYLVLRQVRIDQ\RIWKHVHSXEOLFDWLRQVDSSO\WRWKLV(XURSHDQ6WDQGDUGRQO\ZKHQLQFRUSRUDWHGLQLWE\DPHQGPHQWRUUHYLVLRQ)RUXQGDWHGUHIHUHQFHVWKHODWHVWHGLWLRQRIWKHSXEOLFDWLRQUHIHUUHGWRDSSOLHV

(OHPHQWVQRWTXRWHGLQ7DEOHVDQGVKDOOQRWEHDGGHGLQWHQWLRQDOO\WRWKHVWHHOZLWKRXWWKH

DJUHHPHQWRIWKHSXUFKDVHUH[FHSWIRUWKHSXUSRVHRIILQLVKLQJWKHKHDW$OOUHDVRQDEOHPHDVXUHVVKRXOGDOVREHWDNHQWRSUHYHQWWKHDGGLWLRQIURPWKHVFUDSRURWKHUPDWHULDOXVHGLQWKHPDQXIDFWXUHRIWKHVWHHORIVXFKHOHPHQWVZKLFKDIIHFWWKHFRUURVLRQUHVLVWDQFHPHFKDQLFDOSURSHUWLHVDQGDSSOLFDELOLW\RIWKHVWHHO

 3URGXFWDQDO\VLV

7KHSURGXFWDQDO\VLVVKDOOQRWGHYLDWHIURPWKHVSHFLILHGFDVWDQDO\VLVVHH7DEOHVDQGE\PRUHWKDQWKHYDOXHVVSHFLILHGLQ7DEOHVHHRI(1

3DJH (1

3DJH (1

3DJH (1

 0HFKDQLFDOSURSHUWLHV

 5RRPWHPSHUDWXUHSURSHUWLHV

7KHPHFKDQLFDOSURSHUWLHVGHWHUPLQHGRQWHVWSLHFHVVHOHFWHGSUHSDUHGDQGWHVWHGLQDFFRUGDQFHZLWKFODXVHVDQGRI(1VKDOOFRQIRUPWRWKHSURSHUW\UHTXLUHPHQWVJLYHQLQ

7KLFNQHVVRI UXOLQJVHFWLRQ

+DUGQHVV 3URRI

VWUHQJWK

7HQVLOH VWUHQJWK

 O ORQJLWXGLQDOWU WUDQVYHUVH

3DJH (1

7DEOH0HFKDQLFDOSURSHUWLHVDWURRPWHPSHUDWXUHLQWKHVROXWLRQDQQHDOHGFRQGLWLRQV

$XVWHQLWLFJUDGHV

6WHHOGHVLJQDWLRQ 7KLFNQHVV

RIUXOLQJ VHFWLRQ

 O ORQJLWXGLQDOWU WUDQVYHUVH

3URRI VWUHQJWK

7HQVLOH VWUHQJWK

O ORQJLWXGLQDOWU WUDQVYHUVH

3DJH (1

$QQHDOLQJ WHPSHUDWXUH•&

4XHQFKLQJ WHPSHUDWXUHƒ&

 $DQQHDOHG47 TXHQFKHGDQGWHPSHUHG3 SUHFLSLWDWLRQKDUGHQHG

3DJH (1

3DJH (1

$QQH[&LQIRUPDWLYH

(OHYDWHGWHPSHUDWXUHSURRIVWUHQJWK

(OHYDWHGWHPSHUDWXUHSURRIVWUHQJWKYDOXHVDUHJLYHQLQ7DEOHV&&DQG&IRULQIRUPDWLRQ

7DEOH&0LQLPXPYDOXHVIRUWKHSURRIVWUHQJWKRIIHUULWLFDQGPDUWHQVLWLFJUDGHVDW HOHYDWHGWHPSHUDWXUHV

6WHHOGHVLJQDWLRQ +HDWWUHDWPHQW 0LQLPXPSURRIVWUHQJWKLQ1PPDWDWHPSHUDWXUHRI

1DPH 1XPEHU FRQGLWLRQ ƒ& ƒ& ƒ& ƒ& ƒ& ƒ& ƒ&

3DJH (1

BSI Ð British Standards Institution

BSI is the independent national body responsible for preparing British Standards It presents the UK view on standards in Europe and at the international level It is incorporated by Royal Charter.

BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.

Information on standards

BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service Various BSI electronic information services are also available which give details on all its products and services Contact the Information Centre Tel: 020 8996 7111.

Fax: 020 8996 7048.

Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards For details of these and other benefits contact Membership Administration Tel: 020 8996 7002 Fax: 020 8996 7001.

Copyright

Copyright subsists in all BSI publications BSI also holds the copyright, in the UK, of the publications of the international standardization bodies Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means ± electronic, photocopying, recording or otherwise ± without prior written permission from BSI This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.

If permission is granted, the terms may include royalty payments or a licensing agreement Details and advice can be obtained from the Copyright Manager.

Tel: 020 8996 7070.