BS EN 3660 021 2009 ICS 49 060 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Aerospace series — Cable outlet accessories for circular and rectangular electric[.]
Trang 1BS EN 3660-021:2009
ICS 49.060
BRITISH STANDARD
Aerospace series
— Cable outlet
accessories for circular
and rectangular
electrical and optical
connectors
Part 021: Cable outlet, style A, 90°,
unsealed, self-locking with clamp
strain relief for EN 3645 — Product
standard
Trang 2`,,```,,,,````-`-`,,`,,`,`,,` -This British Standard
was published under the
authority of the Standards
Policy and Strategy
Committee on 30 April
2010.
© BSI 2010
ISBN 978 0 580 61333 3
Amendments/corrigenda issued since publication
National foreword
This British Standard is the UK implementation of EN 3660-021:2009 The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology
A list of organizations represented on this committee can be obtained on request to its secretary
This publication does not purport to include all the necessary provisions
of a contract Users are responsible for its correct application
Compliance with a British Standard cannot confer immunity from legal obligations.
Copyright British Standards Institution
Provided by IHS under license with BSI - Uncontrolled Copy
Trang 3
`,,```,,,,````-`-`,,`,,`,`,,` -BS EN 3660-021:2009
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2009
ICS 49.060
English Version
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 021: Cable
outlet, style A, 90°, unsealed
Série aérospatiale - Accessoires arrière pour connecteurs
circulaires et rectangulaires électriques et optiques - Partie
021: Raccord coudé à 90° non étanche, type A, auto-freinant avec brides serre-câbles pour EN 3645 - Norme de
produit
Luft- und Raumfahrt - Endgehause fur elektrische und optische Rund und Rechteck steckverbinder - Teil 021:Endgehause, Bauform A, 90° Ausfuhrung
This European Standard was approved by CEN on 27 June 2009
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member
This European Standard exists in three official versions (English, French, German) A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom
EUROPEAN COMMITTEE FOR STANDARDIZATION
C O M I T É E U R O P É E N D E N O R M A L I S A T I O N
E U R O P Ä I S C H E S K O M I T E E FÜ R N O R M U N G
Management Centre: Avenue Marnix 17, B-1000 Brussels
worldwide for CEN national Members
Ref No EN 3660-021:2009: E
Trang 4`,,```,,,,````-`-`,,`,,`,`,,` -2
Foreword 3
1 Scope 4
2 Normative references 4
3 Terms and definitions 4
4 Characteristics 4
5 Designation 11
6 Marking 11
7 Technical specification 11
Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy
Trang 5`,,```,,,,````-`-`,,`,,`,`,,` -BS EN 3660-021:2009
EN 3660-021:2009 (E)
Foreword
This document (EN 3660-021:2009) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN)
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at the latest by March 2010
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom
Trang 6`,,```,,,,````-`-`,,`,,`,`,,` -4
1 Scope
This product standard defines a range of cable outlets, style A, 90°, unsealed, self-locking, with clamp strain relief for use under the following conditions:
Associated electrical connector(s) : EN 3660-002
Temperature range, Class N : − 65 °C to 200 °C
Class W : − 65 °C to 175 °C
Class K : − 65 °C to 260 °C
The following referenced documents are indispensable for the application of this document For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies
EN 2591-100*, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 100: General
EN 3645 (series), Aerospace series ― Connectors, electrical, circular, scoop-proof, triple start threaded
coupling, operating temperature 175 °C or 200 °C continuous
EN 3660-001, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical
connectors — Part 001: Technical specification
EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical
connectors — Part 002: Index of product standards
EN 3660-037, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical
connectors — Part 037: Bushing strip, elastomer, for cable outlet, style Z — Product standard
SAE AS85049, Connector accessories, electrical general specification for 1)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 3660-001 apply
4 Characteristics
4.1 Dimensions and mass
For dimensions and mass, see Figure 1 and Table 1
For interface dimensions, see 4.2
* All its parts quoted in this standard
1) Published by: Society of Automotive Engineers, Inc (SAE), 400 Commonwealth Drive, Warrendale, PA 15096-0001
Copyright British Standards Institution
Provided by IHS under license with BSI - Uncontrolled Copy
Trang 7
`,,```,,,,````-`-`,,`,,`,`,,` -BS EN 3660-021:2009
EN 3660-021:2009 (E)
Dimensions in millimetres
Key
c A Thread
d Marking, manufacturers option, see Clause 6
e 4 Drain holes, equally spaced: Ø 2,4 mm for shell size 9 + 11
Ø 3,2 mm for shell size 13 + 15
Ø 4,8 mm for shell size 17 − 25
f Knurled, manufacturers option
g Captive self-locking nut
h Self-locking mechanism
NOTE Coupling nut to be captive on cable outlet body but rotatetable
Figure 1
Trang 8`,,```,,,,````-`-`,,`,,`,`,,` -6
Table 1
Dimensions in millimetres
Shell
size
A B a C D E F G H b J Screw size max g Mass
1,52 9,65
6-32UNC
23,0 43,5
8-32UNC
34,5 65,0
a Bdimension is measured from the bottom of the accessory teeth to the end of the cable outlet
b Hcable entry is measured with saddle bars closed and bottomed on clamp ears
4.2 Component parts
4.2.1 A bushing strip
A bushing strip, see EN 3660-037, should be used to increase cable diameter to ensure proper function of the cable outlet clamp Alternatively an appropriate elastomeric tape, as authorized by the OEM, may be used
4.3 Interface dimensions
4.3.1 Associated connection
See EN 3660-002
Copyright British Standards Institution
Provided by IHS under license with BSI - Uncontrolled Copy
Trang 9`,,```,,,,````-`-`,,`,,`,`,,` -BS EN 3660-021:2009
EN 3660-021:2009 (E)
4.3.2 AS85049 Interface
See Figure 2 and Table 2
Dimensions in millimetres
Figure 2 Table 2
Dimensions in millimetres
Shell size
0
− 0,15
Number
of teeth
min min min
a Minimum penetration of T diameter
4.4 Material and finish
Material/Finish Class N : Aluminium/Electroless nickel plated
Material/Finish Class W : Aluminium/Olive drab cadmium plated
Material/Finish Class K : Stainless steel/Passivated
Hardware Screws, lock nuts : Stainless steel/Passivated, silver plate optional
Trang 108
4.5 Assembly torque
These torque values are intended for installation use only See Table 3
Table 3
Shell size
Torque
Nm
± 0,5
09
4,5
11
13
15
17
19
21
9,0
23
25
4.6 Coupling thread strength torques
These torque values are for test purposes, see EN 2591-420 and Table 4
Table 4
Shell size
Torque
Nm
± 0,5
09
5,5
11
13
15
17
19
21
11,0
23
25
4.7 Tests
Test details to be in accordance with Table 5, EN 3660-001 and EN 2591-100 Qualification to be in accordance with EN 3660-001
Copyright British Standards Institution
Provided by IHS under license with BSI - Uncontrolled Copy
Trang 11`,,```,,,,````-`-`,,`,,`,`,,` -BS EN 3660-021:2009
EN 3660-021:2009 (E)
Table 5
EN 2591- Designation of the test applicable Not
Applicable see
EN 3660-001 Details
102 Examination of dimensions
205 Housing (shell) electrical
5 mΩ max
212 Surface transfer impedance
(from 100 MHz to 1 GHz) a
301 Endurance at temperature X Classes N and W only
305 Rapid change of temperature X —
connector and suspended with non-metallic cord
Duration:
Classes N and K 48 h Class W 500 h
314 Immersion at low air pressure X —
In accordance with EN 3645 Classes K, KE, S and SE, respectively
Severity: 100 g
No of shocks:
One in each direction in
3 perpendicular axes, i.e
6 shocks
(continued over page)
Trang 1210
Table 5 (concluded)
EN 2591- Designation of the test applicable Not Applicable see
EN 3660-001 Details
403 Sinusoidal and random
vibration X Method B Figure 3 Level J Duration:
8 hours in each of two axes
Test performed:
On one group
– 50 % of time at − 65 °C
– 50 % of time at ambient temperature
On a 2nd group
– 100 % of time at maximum temperature of class under test
408 Mating and unmating forces X —
420 Mechanical strength of rear
Shell size Bending
moment
Nm
11
8,5
13
17
14,0
19
21
23
Phase D and Table 4
422 Locking wire hole strength X —
Not fitted to a connector
Max value Classes N and W 2,0
a 1 GHz to 10 GHz under consideration
Copyright British Standards Institution
Provided by IHS under license with BSI - Uncontrolled Copy
Trang 13`,,```,,,,````-`-`,,`,,`,`,,` -BS EN 3660-021:2009
EN 3660-021:2009 (E)
5 Designation
EXAMPLE 1
Description block CABLE OUTLET
Identity block EN3660-021XXX
Number of this standard
Material/Finish class (see 4.4)
Shell size
EXAMPLE 2 EN3660-021N09 Style A, cable outlet, 90º, aluminium, electroless nickel, shell size 09
NOTE 1 No gaps are required between sections in the part number when printed
NOTE 2 If necessary, the code I9005 may be placed between the description block and the identity block
6 Marking
See EN 3660-001
See EN 3660-001
Trang 14`,,```,,,,````-`-`,,`,,`,`,,` -BSI Group
Headquarters 389
Chiswick High Road,
London, W4 4AL, UK
Tel +44 (0)20 8996 9001
Fax +44 (0)20 8996 7001
www.bsigroup.com/
standards
BSI is the independent national body responsible for preparing British Standards It presents the UK view on standards in Europe and at the international level It is incorporated by Royal Charter
Revisions
British Standards are updated by amendment or revision Users of British Standards should make sure that they possess the latest amendments or editions
It is the constant aim of BSI to improve the quality of our products and services
We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover Tel: +44 (0)20 8996 9000 Fax: +44 (0)20 8996 7400
BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards
Buying standards
Orders for all BSI, international and foreign standards publications should be addressed to Customer Services Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996
7001 Email: orders@bsigroup.com You may also buy directly using a debit/credit card from the BSI Shop on the Website http://www.bsigroup.com/shop
In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested
Information on standards
BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service Various BSI electronic information services are also available which give details on all its products and services Contact Information Centre Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: info@bsigroup.com Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards For details
of these and other benefits contact Membership Administration Tel: +44 (0)20
8996 7002 Fax: +44 (0)20 8996 7001 Email: membership@bsigroup.com Information regarding online access to British Standards via British Standards Online can be found at http://www.bsigroup.com/BSOL
Further information about BSI is available on the BSI website at http://
www.bsigroup.com
Copyright
Copyright subsists in all BSI publications BSI also holds the copyright, in the
UK, of the publications of the international standardization bodies Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may
be reproduced, stored in a retrieval system or transmitted in any form or by any means – electronic, photocopying, recording or otherwise – without prior written permission from BSI
This does not preclude the free use, in the course of implementing the standard,
of necessary details such as symbols, and size, type or grade designations If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained
Details and advice can be obtained from the Copyright and Licensing Manager Tel: +44 (0)20 8996 7070 Email: copyright@bsigroup.com
Copyright British Standards Institution
Provided by IHS under license with BSI - Uncontrolled Copy