Bsi bs en 03660 005 2009

ICS 49.060Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors Part 005: Cable outlet, style A, 90°, unsealed with clamp strain reli

ICS 49.060

Aerospace series

— Cable outlet

accessories for circular

and rectangular

electrical and optical

connectors

Part 005: Cable outlet, style A, 90°,

unsealed with clamp strain relief

for EN 2997 and EN 4067 — Product

standard

This British Standard

was published under

the authority of the

Standards Policy and

Strategy Committee on 31

January 2010

© BSI 2010

ISBN 978 0 580 63339 3

Amendments/corrigenda issued since publication

National foreword

This British Standard is the UK implementation of EN 3660-005:2009 It supersedes BS EN 3660-005:2006 which is withdrawn

The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology

A list of organizations represented on this committee can be obtained on request to its secretary

This publication does not purport to include all the necessary provisions

of a contract Users are responsible for its correct application

Compliance with a British Standard cannot confer immunity from legal obligations.

Copyright British Standards Institution

Provided by IHS under license with BSI - Uncontrolled Copy

`,,```,,,,````-`-`,,`,,`,`,,` -NORME EUROPÉENNE

English Version

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief for EN 2997

and EN 4067 - Product standard

Série aérospatiale - Accessoires arrière pour connecteurs

circulaires et rectangulaires électriques et optiques - Partie

005 : Raccord coudé à 90º non étanche type A avec brides

serre-câbles pour EN 2997 et EN 4067 - Norme de produit

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 005: Endgehäuse, Bauform A, 90º Ausführung, nicht abgedichtet, mit Zugentlastungsklemme für EN 2997 und

EN 4067 - Produktnorm

This European Standard was approved by CEN on 20 June 2009

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member

This European Standard exists in three official versions (English, French, German) A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom

EUROPEAN COMMITTEE FOR STANDARDIZATION

C O M I T É E U R O P É E N D E N O R M A L I S A T I O N

E U R O P Ä I S C H E S K O M I T E E FÜ R N O R M U N G

Management Centre: Avenue Marnix 17, B-1000 Brussels

worldwide for CEN national Members

Ref No EN 3660-005:2009: E

`,,```,,,,````-`-`,,`,,`,`,,` -2

Foreword 3

1 Scope 4

2 Normative references 4

3 Terms and definitions 4

4 Characteristics 5

5 Designation 12

6 Marking 13

7 Technical specification 13

Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy

`,,```,,,,````-`-`,,`,,`,`,,` -Foreword

This document (EN 3660-005:2009) has been prepared by the Aerospace and Defence Industries Association

of Europe - Standardization (ASD-STAN)

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN

This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by May 2010

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights This document supersedes EN 3660-005:2006

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom

`,,```,,,,````-`-`,,`,,`,`,,` -4

1 Scope

This European Standard defines a range of cable outlets, style A, 90°, unsealed with clamp strain relief for use under the following conditions:

Associated electrical connector(s) : EN 3660-002

Temperature range, Class N : − 65 °C to 200 °C

Class W : − 65 °C to 175 °C Class K : − 65 °C to 260 °C Class A : − 65 °C to 200 °C

2 Normative references

The following referenced documents are indispensable for the application of this document For dated references, only the edition cited applies For undated references, the latest edition of the referenced document (including any amendments) applies

EN 2591-100*, Aerospace series ― Elements of electrical and optical connection ― Test methods ―

Part 100: General

EN 2997 (all parts), Aerospace series ― Connectors, electrical, circular, coupled by threaded ring,

fire-resistant or non fire-fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous,

260 °C peak

EN 3660-001:2006, Aerospace series — Cable outlet accessories for circular and rectangular electrical and

optical connectors — Part 001: Technical specification

EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical

connectors — Part 002: Index of product standards

AS85049A, Connector accessories, electrical general specification for- 1)

3 Terms and definitions

For the purposes of this document, the terms and definitions given in EN 3660-001:2006 apply

* As well as all parts quoted in this standard

1) Published by: Society of Automotive Engineers, Inc (SAE), 400 Commonwealth Drive, Warrendale, PA 15096-0001, USA

Copyright British Standards Institution

Provided by IHS under license with BSI - Uncontrolled Copy

`,,```,,,,````-`-`,,`,,`,`,,` -4 Characteristics

4.1 Dimensions and mass

For dimensions and mass, see Figure 1 and Table 1

For interface dimensions, see 4.2

Dimensions in millimetres

(continued)

Figure 1

`,,```,,,,````-`-`,,`,,`,`,,` -6

Dimensions in millimetres

Detail Z with four holes for torque wrench, see detail Z Optional design Key

1 Thread A

2 Teeth N (see Tables 2 and 3)

3 Three off wire lock holes equi-spaced for 0,8 mm max diameter wire

4 Fillister head screw with wire lock hole

5 Knurled, manufacturers option

6 Marking (see Clause 6)

7 Valley of start tooth to be at vertical centre line of accessory at position shown

8 Four holes for assembly torque equi-spaced ∅ 2,80+00,10 (see Figure 1, detail Z)

within ± 3° for shell sizes 08 - 12

within ± 2° for shell sizes 14 - 18

within ± 1° for shell sizes 20 and larger

a The location of holes axis can be left to the manufacturer's preference

NOTE 1 The details X and Y are shown in the different variants (see 4.2.2 and 4.2.3)

NOTE 2 Coupling nut to be captive on cable outlet body but free to rotate

Figure 2 (concluded)

a

8

Copyright British Standards Institution

Provided by IHS under license with BSI - Uncontrolled Copy

`,,```,,,,````-`-`,,`,,`,`,,` -Table 1

Shell size

A ∅ B ∅ B1 ∅ C D E a K L M b

Thread Class 2B

Wire accomodation

0

− 1,14 − 1,14 0 + 0,64

0 − 1,57 0 − 0,56 0 max ± 1,57 max min

08 0,500-20UNF 15,67 19,47 12,74 13,72 7,75 28,97 18,95 5,2 3,2

10 0,625-24UNEF 18,64 22,47 15,88 13,72 7,75 30,05 20,45 7,3 4,8

12 0,750-20UNEF 21,79 25,47 19,05 13,72 7,75 34,95 22,02 9,8 7,4

14 0,875-20UNEF 24,99 28,67 22,23 13,72 7,75 36,47 23,62 11,3 9,0

16 1,000-20UNEF 28,24 31,67 25,40 13,72 7,75 40,26 25,25 15,1 12,8

18 1,063-18UNEF 30,94 34,67 27,00 13,72 7,75 43,10 29,74 16,3 13,2

20 1,188-18UNEF 34,16 37,67 30,18 13,72 7,75 46,29 31,34 17,9 15,0

22 1,313-18UNEF 37,29 40,67 33,35 13,72 7,75 49,45 32,92 19,5 16,3

24 1,438-18UNEF 40,46 44,07 36,53 13,72 7,75 52,63 34,49 20,3 18,0

28 1,750-18UNS 50,01 50,97 44,45 17,83 7,75 60,25 39,93 20,7 19,0

Shell size

M1 b P R

Screw size Class 2A

Wire accomodation

Classes N,

max min ± 0,5 ± 0,5 ± 0,8 ± 0,8

max

g

Variant

08 5,2 3,2 18,6 6,35 6-32UNC 12,7 12,7 11,0 11,9 19,6 27,3

10 7,3 4,8 20,6 6,35 6-32UNC 12,7 12,7 12,0 14,2 21,2 33,2

12 10,6 7,4 24,6 6,35 6-32UNC 12,7 15,9 14,0 18,4 23,9 43,8

14 12,0 9,0 26,1 6,35 6-32UNC 12,7 15,9 18,0 22 27,6 53,1

16 16,0 12,8 33,0 6,35 6-32UNC 12,7 15,9 20,0 27 35,1 66,1

18 18,0 13,2 36,4 9,53 8-32UNC 15,9 19,1 28,5 41,4 45,0 99,7

20 21,0 15,0 39,0 9,53 8-32UNC 15,9 22,3 31,0 49,2 51,1 119,1

22 24,3 16,3 41,5 9,53 8-32UNC 15,9 25,4 35,5 57 55,7 138,4

24 27,5 18,0 44,6 9,53 8-32UNC 15,9 28,6 39,5 69,4 73,6 170,4

28 30,0 19,0 50,8 12,70 8-32UNC 19,5 31,8 70,0 114,2 89,8 289,5

a E dimension is taken when the coupling nut is pulled in forward position

b M and T dimensions are for variants A and D; M1 and T1 dimensions are for variants B and C M and M1 diameters are wire

`,,```,,,,````-`-`,,`,,`,`,,` -8

4.2 Interface dimensions

4.2.1 Associated connection

See EN 3660-002

4.2.2 Variants A and C – AS85049 interface

See Figure 2, Figure 3 and Table 2

All dimensions are in millimetres

Figure 3 — Detail X Figure 4 — Detail Y

Table 2

Dimensions in millimetres

Shell size

0

− 0,38 + 0,38

0 − 0,25 0

Number

of teeth

08 9,10 7,59 6,86 12

10 12,50 11,00 9,53 15

12 15,50 13,94 12,98 21

14 18,70 17,12 14,86 24

16 21,80 20,29 18,03 30

18 23,30 22,07 20,04 33

20 26,40 25,25 23,22 36

22 29,60 28,42 26,39 39

24 32,80 31,60 29,31 42

28 38,40 37,31 35,28 54

Copyright British Standards Institution

Provided by IHS under license with BSI - Uncontrolled Copy

`,,```,,,,````-`-`,,`,,`,`,,` -4.2.3 Variants B and D – Modified AS85049 interface

See Figure 4, Figure 5 and Table 3

All dimensions are in millimetres

Figure 5 — Detail X (Class K only) Figure 6 — Detail Y

Table 3

Dimensions in millimetres

Shell size

+ 0,18

0 − 0,25 0

Number

of teeth

08 6,68 11,10 9,17 6,86 12

10 9,35 14,53 11,10 9,53 15

12 12,62 17,45 14,83 12,98 21

14 14,86 20,62 17,22 15,98 24

16 17,73 23,80 20,55 18,03 30

18 20,04 25,20 22,48 21,46 33

20 23,22 28,37 25,53 25,02 36

22 26,39 31,55 29,01 27,61 39

24 29,31 34,72 32,46 31,62 42

28 35,28 42,75 38,91 37,97 54

4.3 Material and finish

Material/Finish Class N : Aluminium/Electroless nickel plated Material/Finish Class W : Aluminium/Olive drab cadmium plated Material/Finish Class K : Stainless steel/Passivated

Material/Finish Class A : Aluminium/Black anodized

`,,```,,,,````-`-`,,`,,`,`,,` -10

4.4 Assembly torque

These torque values are intended for installation use only, see Table 4

Table 4

Shell size

Torque

Nm

± 0,5

08

4,5

10

12

14

16

18

20

9,0

22

24

4.5 Coupling thread strength torques

These torque values are for test purposes, see EN 2591-420 and Table 5

Table 5

Shell size

Torque

Nm

± 0,5

08

5,5

10

12

14

16

18

20

11,0

22

24

4.6 Tests

Test details to be in accordance with Table 6, EN 3660-001 and EN 2591-100 Qualification to be in accordance with EN 3660-001

Copyright British Standards Institution

Provided by IHS under license with BSI - Uncontrolled Copy

`,,```,,,,````-`-`,,`,,`,`,,` -Table 6

EN 2591- Designation of the test applicable Not

Applicable see

EN 3660-001 Details

101 Visual examination X —

102 Examination of dimensions

205 Housing (shell) electrical

continuity X Classes W, N and K only 5 mΩ max

212 Surface transfer impedance

(from 100 MHz to 1 GHz) a X —

301 Endurance at temperature X Classes N, A and W only

305 Rapid change of temperature X —

306 Mould growth X See EN 3660-001

307 Salt mist X Cable outlet not fitted to a

connector and suspended with non-metallic cord

Duration:

Classes N, K and A 48 h Class W 500 h

308 Sand and dust X —

314 Immersion at low air pressure X —

315 Fluid resistance X —

316 Ozone resistance X —

317 Flammability X —

318 Fire-resistance X Class K only In accordance with

EN 2997 Classes K, KE, S and

SE, respectively

Severity: 100 g

No of shocks:

One in each direction in three perpendicular axes, i.e six shocks

403 Sinusoidal and random

vibration

X Method B Figure 3 Level J

Duration:

8 h in each of two axes Test performed:

on one group – 50 % of time at – 65 °C – 50 % of time at ambient temperature

on a 2nd group – 100 % of time at maximum temperature of class under test

continued

`,,```,,,,````-`-`,,`,,`,`,,` -12

Table 6 (concluded)

EN 2591- Designation of the test applicable Not

Applicable see

EN 3660-001 Details

406 Mechanical endurance X —

408 Mating and unmating forces X Only variant 2, see Table 4

420 Mechanical strength of rear

accessories X Phase A

Shell

Nm

08

10

12

14

16

18

20

22

24

28

6,0 10,0 20,5 22,5 28,0 31,5 34,0 39,5 43,0 47,5

Phase D and Table 5

422 Locking wire hole strength X —

513 Magnetic permeability X Not fitted to a connector

Max values:

Classes N, A and W 2,0 Class K 5,0

5 Designation

EXAMPLE 1

Description block CABLE OUTLET

Identity block EN3660-005XXXXX

Number of this standard

Material/Finish class

Shell size

Variant - A Standard AS85049 interface with M entry and T screw

B Modified AS85049 interface with M1 entry and T1 screw

C Standard AS85049 interface with M1 entry and T1 screw

D Modified AS85049 interface with M entry and T screw

Variant 1: Nothing nut with three holes for wire lock

Variant 2: One nut with four holes for assembly torque

Copyright British Standards Institution

Provided by IHS under license with BSI - Uncontrolled Copy