Height Measurement Ink Level f2 Objective: 4° 7 To verify that a stack of boards has the correct number of boards, by ORE Objective: Sra” TO monitor the ink level in a printer tray
Trang 1Height Measurement Ink Level
f2 Objective:
4° 7 To verify that a stack of boards has
the correct number of boards, by
ORE Objective:
Sra” TO monitor the ink level in a printer
tray
measuring the stack’s height
See page 304 Se page 304
ORE Objective:
To detect vehicle separation in an
Automated Vehicle Classification (AVC)
system
ORE Objective:
(NEO To track the edge of a web asit rolls,
to make sure it stays aligned
Web
ORE
NLINI
quam Applications
Measurement & Inspection
Thickness Empty Rack Verification
—¬
Objective:
To measure the thickness of webbing
f5 Objective:
PS) To verify that all glass hard disks are
~
Se page 304
Hot Glue Detection
ORE NLINI
Objective:
To identify food packages mi sing hot sealing glue, before the flaps are closed
Se page 312
Small Part Detection
Se page 312
Small Part Counting
Se page 328
Small Object Detection
ORE Objective:
Sơ 10 detect extremely small parts as
— +! they fall through a web of sensing beams
IORE Objective:
(NEO To count parts as small as 5.6 mm in
À - diameter
Se page 332
See page 332
Confined Area
ORE
NLIM
` Objective:
To accurately detect flat objects passing
on a conveyor
Se page 332
Long-Range Assembly Sequence Indication
ORE Objective:
PS) To indicate to an assembler the part
to pick and to alert the assembler
to an error
ORE Objective:
NFO To indicate the part-picking sequence and Y1 enable the asembler to indicate each completed task without hand stress
Ea NLINI
Objective:
To provide pick-to-light signaling across awide bin
Se page 336
More information online at bannerengineering.corn/applications
Se page 339 Se page 342
removed from the holding rack after
\ the disks are missed
Se page 308
Hot Part Detection
fis Objective:
(NEO To make sure that a waffle maker is hot before batter is poured into it
/
Se page 328
Low Supply Signaling
Gea Objective:
NFO To give a means for signaling that a Ww? supply of parts needs to be replenished
Se page 336
Part-Picking Indication
ORE Objective:
ino To signal to the assembler the next part to pick in a sequence and to trigger the next light in the sequence
Se page 346
Al
Trang 2Applications
TINY & TOUGH, IP67 & NEMA 6
Uitra-miniature V-Series ÿ a
> VS1: convergent beam sensors with 10 mm or 20 mm range, visible or infrared beam
> VS2: ultra-thin, 4.3 mm thick convergent or opposed
We're bị
° mode sensors with ranges of 15 mm, 30 mm or 600 mm
1 lại S mm Pe | S lên lại S l6) Y LS Py > VS3: opposed mode and unique retro mode sensors
that utilize coaxial optics to eliminate blind zone for reliable detection of close and shiny objects www bannerengineering.com/vs
> T-shaped package with 8 mm threaded nose
> Powerful, 2 m opposed range, and either 50 or
100 mm diffuse range www bannerengineering.com/t8
W0RLD-BEAM”
Universal Sensors
> Replaces hundreds
of sensors, all sensing modes 18 mm
threaded nose or flush front: ranges to 20 m
> Adjustable-field model allows users to set
precise cutoff range between 20 and 100 mm eliminating background interference
> New Expert™ models have pushbutton
microprocessor to reliably solve low contrast applications
www.bannerengineering.com/worldbeam
Miniature ca : Rectangular Sensors
> MINI-BEAM®2: has 12 mm threaded nose or flush front, and ranges to 4 m One-step
pushbutton excess gain control
> Q23 and QH23: powerful, vertical and horizontal
design in all sensing modes, with ranges to 8 m www bannerengineering.com/mini
> World's largest selection “
of glass and plastic fibers #
plus custom-designed fibers built quickly
convergent sensing modes
> Soive difficult applications with advanced
Banner fiber optic amplifiers
> Solve high temp, noisy, or chemically aggressive
applications with ultra-compact fiber optic heads www bannerengineering.com/fiberoptics
1.888.373.6767
bannerengineering.com
}2002 Banner Engineering Corp., Minneapolis, MN
42 = More information online at bannerengineering.cgm/applications
yo