Tài liệu Connectors and Accessories pptx

Features • Designed to exceed the rigorous demands of today's telecom CATV and broadcast environment including SMPTE 259, 274, and 292M standards • Outstanding electrical performance up

Connectors and Accessories

75 Ohm BNC Connectors 88

75 Ohm Precision F Connectors 90

Precision RCA Connectors 91

Ordering Information for Connector 92

Connectors Tools and Accessories 99

ProAx™Triaxial Camera Connectors 104

ADC’s BNC connectors are the most reliable and universally accepted method of terminating coaxial cable in the market today Outstanding electrical performance (up to 3 GHz) is achieved by unique design elements in the industry's truest 75-Ohm connector Precision-molded insulators with locking gold-plated center conductors ensure true 75-Ohm characteristic impedance Innovative features result

in significant reduction of impedance mismatch throughout the network and improved

transmission reliability in digital applications.

Features

• Designed to exceed the rigorous demands of today's telecom CATV and broadcast environment including SMPTE 259, 274, and 292M standards

• Outstanding electrical performance up to 3 GHz

• Gold-plated, locking center conductor

• True 75 Ohm characteristic impedance end-to-end

• Compatible with hex, square, and 12-point crimp tools and select competitive crimp tools and die sets

• Tarnish-resistant, nickel-plated body and machine bayonet

• Sizes for multiple cable types

• Meets or exceeds MIL-C-39012 requirements

• 100% North American/European precision components

Connector Products

75 Ohm BNC Connectors

An idea whose time has come, the new notched BNC series from ADC makes it easy to spot BNC

connectors that are not properly latched to BNC jacks This is especially helpful with high-density coax panels such as ADC’s midsize video product offering where terminations are very tight, and in the back

of dark racks.

Index notches at 12 and 6 make it easy to spot when BNCs are not properly locked

Connector Products

For all types of digital applications, ADC's true 75 Ohm BNC connector products ensure outstanding electrical performance, improved transmission, and enhanced reliability ADC offers a complete line of straight, right angle, and bulkhead connectors, complemented by adapters, terminating plugs, and accessories.

• True 75 Ohm characteristic impedance through the entire connector

• Outstanding electrical performance to 3 GHz

• Tarnish-resistant, nickel-plated body and bayonet

• Compatible with select competitive crimp tools and die sets

• Sizes for multiple cable types

• Meets or exceeds all requirements in MIL-C-39012

Features

• Designed to exceed the rigorous demands of today's broadcast

environment, including SMPTE 259, 274, and 292M standards

• Gold-plated, locking center conductor

• 625" crimp sleeve for greater pulloff force

• 100 percent guided mating

• Compatible with telco 12-point crimp tools

• Strip lengths common between sizes and types (except for Belden

7731/CommScope 7530, RG11 Cable)

Bulkhead Jack Connectors

Straight BNC Plug Connectors

Right Angle BNC Plug Connectors

Features

• Right angle design alleviates stress associated with bending cable

• Provides increased density

• Improves overall cable management

• Bulk packaging available

• Center conductor pins and crimp sleeves are fully interchangeable

with ADC's straight plugs for same cable type

Features

• Easier, more reliable termination; gold-plated locking center

conductor ensures proper alignment during termination

• 100 percent guided mating

• Exclusive closed-entry contact prevents center conductor damage

from non-standard BNCs or test probes

• Eliminates one termination point when used as a bulkhead connector

75 Ohm BNC Connectors

Connector Products

75 Ohm Precision ADC F Connectors

ADC’s performance F connectors are designed for demanding digital applications where a high-quality, high-performance F connector is required These connectors provide superior return loss (-30 dB to

3 GHZ) and are the perfect choice for use in digital headends, satellite down links, and high performance customer premises applications.

Features

• All-crimp two-piece design goes together like a BNC

• Combines the superior electrical performance of a BNC with the superior RF performance of an F connector

• True 75-Ohm design for performance up to 3 GHz

• Crimp-on center pin provides outstanding connection rather than relying on the copper center conductor

of the cable

• Gold-plated locking center pin just like a BNC connector

• Diamond-knurled crimp hub and long 500" crimp sleeve provides higher pull-off force than typical

F connector types

• Long 3/8" wrench flats make for a more comfortable and easier connector to thread

• Precision machined parts for greater unit to unit consistency

• Exclusive molded center conductor insulator provides a truer impedance match over PVC and Teflon types

• Same strip and crimp dimensions as our standard BNC plugs, common tooling

• Cable sizes for RG59, RG187, and RG6 available

• Termination plugs in 1% and precision 0.1% available

Connector Products

Precision RCA Connectors

The venerable RCA connector is still the universally accepted method of terminating coaxial cable for audio and video signals in Prosumer-type products such as video decks, DVDs, video projectors and HD monitors ADC’s new precision RCA connectors are designed for demanding professional environments, offering a performance-driven product with outstanding mechanical and electrical characteristics, as well

as easy BNC-type assembly Precision-molded insulators with locking gold-plated center conductors ensure nominal 75 Ohm characteristic impedance Innovative features such as ADC’s proprietary geometrically molded insulator design result in a significant reduction of impedance mismatch and improved transmis-sion reliability for digital applications ADC’s RCA connectors use the same strip and crimp tools as ADC BNC and F connector products, making installation easy and fast.

Features

• Outstanding electrical performance up to 2 GHz

• 50 microinch gold-plated, locking internal center conductor crimps to cable

• Exclusive closed-entry center pin contact RCA pin/receptacle

• Nominal 75 Ohm characteristic impedance end-to-end

• Easy preparation and installation; installs just like a standard BNC with BNC tooling

• Compatible with hex, square, and 12-point crimp tools and select competitive crimp tool and die sets

• Tarnish-resistant, nickel-plated body; 50 microinch gold-plated center pin, or all gold-plated version (shown)

• Sizes for multiple cable types

• Cable sizes for RG59, RG187 and RG6 available; uses same tooling

• Meets or exceeds MIL-STD-202F requirements

75 Ohm BNC, F, and RCA Connectors

Ordering Information

Below is an ordering guide that will help you select the BNC, F, and RCA connectors that best meet your needs

Simply select the connector type, diameter, crimp area and cable type to determine the correct ADC ordering number

In addition to the 042" square pin crimp, all connectors listed are compatible with a 12-point method of crimping or

.042" hex crimp All ADC BNC connector plugs use the same crimp dimensions and crimp tools for the same cable type Bulk packaging in quantities of 100 is available (package includes 100 connector bodies, 100 center pins, and 100 crimp sleeves bagged separately) For bulk packaging add "B" to the end of the ordering number Example: BNC-13B

Cable Dielectric Outside Diameter Connector Crimp Areas

CV752, FM59, RCCH, 9167, M8023, LV61

VSD2001TS, RG6SD, 1.0/4.8, M8024, L-5CFB

CV752, FM59, RCCH, 9167, M8023, LV61

CV752, FM59, RCCH, 9167, M8023, LV61

RG6SD, 1.0/4.8, M8024, L-5CFB

CV752, FM59, RCCH, 9167, M8023, LV61

RG6SD, 1.0/48, M8024, L-5CFB

RG6SD, 1.0/48, M8024, L-5CFB

BNC and F Terminating Plugs

Description

BNC terminating plug

1% 75 Ohm resistor

precision 0.1% 75 Ohm resistor

F terminating plug

1% 75 Ohm resistor

precision 0.1% 75 Ohm resistor

Ordering Number

BNC-TP1 BNC-TP2 CF-TP1 CF-TP2

O r d e r i n g I n f o r m a t i o n

BNC-TP2 Precision 0.1% Terminating Plug

75 Ohm BNC Connectors

Description

Hex nut for 505" bulkhead connectors

Locking washer for 505" bulkhead connectors

Insulating shoulder washer for 505" bulkhead connectors

Hex nut for 440" bulkhead connectors

Locking washer for 440" bulkhead connectors

Insulating shoulder washer for 440" bulkhead connectors

2.5 mm x 5 mm Phillips pan head screw for BNC-PC-RRA

Ordering Number

TPC-1B TPC-1C HDW-101611 BNC-HN440 BNC-LW440 BNC-IW440 SA1089-00

O r d e r i n g I n f o r m a t i o n

Accessories

CF-TP1 Precision 0.1% Terminating Plug

75 Ohm BNC Connectors

Adapters and Bulkheads

BNC-STRT-ADP Straight Adapter

Description

BNC straight adapter

BNC right angle adapter

Bulkhead feedthrough, for 505"/.585" cutout

Bulkhead feedthrough, for 440"/.505" cutout

Bulkhead feedthrough with panel isolation washers

Bulk 100 pack version of above

Bulkhead male to female

F to BNC Bulkhead Feedthrough adaptor, no hardware

F to F Bulkhead Feedthrough adaptor, no hardware

F to BNC Bulkhead Feedthrough adaptor w/hardware

F to F Bulkhead Feedthrough adaptor, Insulated w/hardware

F to BNC Bulkhead Feedthrough adaptor, Insulated w/hardware

F to BNC Bulkhead Feedthrough adaptor, insulated w/hardware

bulk 100 count

F to F Bulkhead Feedthrough adaptor insulated w/hardware

F to F Bulkhead Feedthrough adaptor insulated w/hardware

bulk 100 count

Ordering Number

BNC-STRT-ADP BNC-RA-ADP BHFT1 BHFT-I2 BHFT-I1 BHFT-I1B BHFT-MF BHFT0-FB BHFT0-FF BHFT1-FB BHFT1-FF BHFT-FB-I1 BHFT-FB-I1-B BHFT-FF-I1 BHFT-FF-I1-B

O r d e r i n g I n f o r m a t i o n

BNC-RA-ADP Right Angle Adapter

Features

• Improved performance – true 75 Ohm character impedance

• Outstanding electrical performance to 3 GHz

• Bulkhead feedthrough available with or without panel isolation

• Meets the performance requirements of MIL-A-55339 for radio

frequency coaxial adapters

• Gold-plated, closed-entry contact center conductor to prevent

damage during test or mating plug termination

.380" 350"

BHFT-MF

BHFT-I1

.505"

± 005"

RECOMMENDED PANEL CUTOUT WITHOUT INSULATING WASHER (MAX THICKNESS 250)

RECOMMENDED PANEL CUTOUT WITH INSULATING WASHER (MAX THICKNESS 250)

.585"

± 005"

.440"

RECOMMENDED PANEL CUTOUT WITHOUT ISOLATION WASHER (MAX PANEL THICKNESS: 250)

.505"

RECOMMENDED PANEL CUTOUT WITH ISOLATION WASHER (MAX PANEL THICKNESS: 250)

BHFT-I2

75 Ohm BNC Connectors

PCB Mount BNC Connectors

Description

BNC PC mount straight staked

BNC PC mount threaded right angle

BNC PC mount threaded straight

BNC PC mount right angle screw mount

BNC PC mount right angle screw mount with screw

BNC square panel mount

Ordering Number

BNC-PC-V1 BNC-PC-RTRA BNC-PC-STRT BNC-PC-RRA BNC-PC-RRA-1 BNC-BHJ-PNL-3TMX

O r d e r i n g I n f o r m a t i o n

BNC-PC-V1

BNC-PC-RTRA

BNC-PC-STRT

BNC-PC-RRA

Mounting Template Hole Cutout

Mounting Template Hole Cutout

Mounting Template

Mounting Template Hole Cutout

.465"

(11.81)

.080" (2.03)

.271"

(6.88)

.048" (1.22)

.136 (3.44)

.136"

.271"

(6.88)

(5)

0.054 "

(1.37)

.200 "

5.08

0.200 "

(5.08) 0.400"

(10.16) UNPLATED

0.082 "

(2.08)

UNPLATED

0.109 "

(2.77)

0.276 "

(7.01) 0.252 "

(6.4) MAX 0.134 "

(3.4)

PCB-PATTERN (TOP VIEW)

0.384 "

(9.75)

0.447 "

(11.35)

(5)

0.054 "

(1.37)

0.200 "

(5.08)

0.200 "

(5.08)

0.400 "

(10.16) PCB-PATTERN

0.384 "

(9.75)

0.447 "

(11.35)

0.063 "

(1.6) (2)

0.054 "

(1.37)

0.300 "

(7.62)

0.150 "

(3.81) PCB-PATTERN

.689" (17.50 mm)

1.397"

.600"

75 Ohm BNC Connectors

Description

Ordering Number

O r d e r i n g I n f o r m a t i o n

Recessed BNC Panels and Connectors

BHFT-PNL-16-BK

* Replace X in ordering number with desired color (G=green, R=red, B=black, BL=blue, W=white, Y=yellow)

1.228"

.256"

1.25"

1.74"

19.00"

18.31"

.344"

.075"

.44" X 25" SLOT (4)

RECESSED BNC-BNC (16)

.960"

.656"

.328"

#4 PILOT (2) PANEL MOUNTING

1.050"

BHFT-R-X

For x specify color

Black – BK

Red – R

Orange – O

Yellow – Y

Green – G

Blue – B

Violet – V

White – W

75 Ohm BNC Connectors

Recessed Components

1.430"

1.050"

2X GROUND TAB PIN 2

PIN 1

PIN 4

PIN 3

SV-R-X

RCA-R-X

1.268"

.940"

.600"

.094"

NUT LOCK WASHER RCA JACK

1.470"

.940"

.600"

.094"

NUT LOCK WASHER S-VIDEO CONN

RJ45 BHFT-CAT5E-X BHFT-CAT6-X

For x specify color

Black – BK

Red – R

Orange – O

Yellow – Y

Green – G

Blue – B

Violet – V

White – W

BNC, F and RCA Tooling

Description

Crimp tool with ergonomic handle for ADC

die sets

Crimp tool with long ergonomic handle for

ADC die sets

BNC insertion tool with 6” handle

BNC insertion tool with 12" handle

BNC insertion tool with 24" handle

Crimp tool, 12 point For BNC, F, RCA and LCC

Ordering Number

WT-2 WT-3 BT2000-06 BT2000-12 BT2000-24 WTC-12

O r d e r i n g I n f o r m a t i o n

O r d e r i n g I n f o r m a t i o n

Ordering Number

1.260"

.476"

AAA BBB CAT NO xxx

CAT NO xxx

A

.042"

B

.068"

C

D

BNC Crimping Tool WT-2

BNC Insertion Tool BT2000-12

WTC-12

Die Set Dimensions

Features

• Durable ergonomic handle provides greater comfort

• Fully adjustable for preloading to maintain die set alignment

• Exceptional life, rated for 100,000 crimp cycles

• Available in two handle sizes

• Highest mechanical advantage in the industry, reduces fatigue

during crimping

• Precision-manufactured by Pressmaster in Sweden

BNC, F and RCA and LCC Die Sets

BNC Crimping Tool

* SER units feature a unique serial number that imprints on

the crimp sleeve This is useful for tracking tooling or

installation quality

BNC, F and RCA Tooling

Ordering Number

Station Dimensions

O r d e r i n g I n f o r m a t i o n

Hand Crimp Tool

WT-2

Ergonomic

Handle

WT-3

Long Ergonomic

Handle

BNC, F and RCA Tooling

.094"

.156"

.344"

.594"

.125"

.565"

BNC,F, and RCA Plug Strip Length (All BNC Plug Connectors except BNC-25 and BNC-24)

BNC Plug Strip Length For BNC-25 and BNC-24

STC-12B

Description

Complete Manual Stripper

Tool Kit

Includes stripper cassette,

memory and tool

Ordering Number

STC-13B

STC-12B

STC-11B

O r d e r i n g I n f o r m a t i o n

Description

Stripper Cassette

Replacement cutting blades for

the manual Stripper Tool

Memory for Manual

Stripper Tool

Determines how deep each blade

on the stripper cassette will cut

into cable Can be adjusted for

most cable types

Empty Tool Handle

Requires memory and

stripper cassette

Ordering Number

CCS-BLK

CCS-1

CCS-2 CCS-3

STC-1

Connector Type

All, except BNC-25

BNC-4, BNC-5, BNC-8, BNC-9, BNC-11 BNC-1, BNC-2, BNC-6, BNC-10 BNC-3, BNC-7, BNC-12, BNC-13 All, except BNC-25

O r d e r i n g I n f o r m a t i o n

Individual Tools

Cable Stripper Tool Kit

Connector Type

BNC-3, BNC-7, BNC-12, BNC-13, BNC-16, BNC-22 BNC-1, BNC-2, BNC-6, BNC-10 BNC-4, BNC-5, BNC-8, BNC-9, BNC-11, BNC-17

BNC, F and RCA Tooling

BNC-TOOL-1

Description

Connection tool kit for BNC connectors

Includes:

• Crimp tool (WT-2)

• BNC crimp die set for 735, RG59 and 734 cables

(WD-2)

• Stripping tool with cassette for 735/0222 cables

(STC-13B)

• Stripping tool with cassette for RG59/734 cables

(STC-12B)

• Cable termination tray (LCA-000009)

• Insertion/withdrawal tool for BNC connector

(BT2000)

• Carrying case

Ordering Number

BNC-TOOL-1

O r d e r i n g I n f o r m a t i o n

Connection Tool Kit

stripper body, AC/DC charger,

ABS plastic carrying case,

instruction manual

Cutter Heads for

BNC-6, BNC-8,

BNC-11 BNC-3, BNC-7, BNC-12, BNC-13