A study of the design and construction of a 3D printer using FDM technology

See discussions, stats, and author profiles for this publication at: https://www.researchgate.net/publication/310954376A study of the design and construction of a 3D printer using FDM te

See discussions, stats, and author profiles for this publication at: https://www.researchgate.net/publication/310954376

A study of the design and construction of a 3D printer using FDM technology based on the Delta parallel robot

Conference Paper · November 2016

CITATIONS

0

READS 128

2 authors:

Some of the authors of this publication are also working on these related projects:

VNM.ROV-01View project

Quoc-Nam Tang

Le Quy Don Technical University

24PUBLICATIONS   0CITATIONS   

SEE PROFILE

Ngoc-Binh Nguyen

Le Quy Don Technical University

1PUBLICATION   0CITATIONS   

SEE PROFILE

All content following this page was uploaded by Quoc-Nam Tang on 22 December 2018.

The user has requested enhancement of the downloaded file.