Tài liệu 19.5. Reading Email p1 pdf

Reading Email Mail puts all incoming email into your Inbox; the statistic after the word Inbox lets you know how many messages you haven't yet read.. Click the name of a message once to

19.5 Reading Email

Mail puts all incoming email into your Inbox; the statistic after the word Inbox lets you know how many messages you haven't yet read New messages are also marked with light blue dots in the main list

Tip: The Mail icon in the Dock also shows you how many new messages you have

waiting; it's the number in the red circle

Click the Inbox folder to see a list of received messages If it's a long list, press Control-Page Up and Control-Control-Page Down to scroll Click the name of a message once to read it in the Preview pane, or double-click a message to open it into a separate window (If a message is already selected, pressing Return or Enter also opens its separate window.)

Tip: Instead of reading your mail, you might prefer to have Mac OS X read it to you, as

you sit back in your chair and sip a strawberry daiquiri Highlight the text you want to hear (or choose Edit Select All), and then choose Edit Speech Start Speaking You'll hear the message read aloud, in the voice you've selected on the Speech pane of System Preferences (Section 4.5.1).To stop the insanity, choose Edit Speech Stop Speaking

Once you've viewed a message, you can respond to it, delete it, print it, file it, and so on The following pages should get you started

19.5.1 Threading

Threading is one of the most useful mail-sorting methods to come along in a long time— and it's available in Mail When threading is turned on, Mail groups emails with the same subject (like "Raccoons" and "Re: Raccoons") as a single item in the main mail list

To turn on threading, choose View Organize by Thread If several messages have the same subject, they all turn light blue to indicate their membership in a thread (Figure 19-10)

Here are some powerful ways to use threading:

• View a list of all the messages in a thread by clicking its heading In the Preview

pane, you see a comprehensive inventory of the thread (Figure 19-10) You can click a message's name in this list to jump right to it

UP TO SPEED All the Little Symbols

The first column of the main email list shows little symbols that let you know at

a glance how you've processed certain messages The most common one is, of

course, the light-blue dot , which means "new message." (After reading a

message, you can mark it once again as an unread message by choosing

Message Mark As Unread [Shift- -U]—or by Control-clicking the

message's name and then choosing Mark As Unread from the shortcut

menu.)

You might also see these symbols, which represent messages that you've replied

to , forwarded , redirected , or flagged

A well-guarded secret, however, is that the "replied to" and "forwarded"

symbols aren't just indicators—they're buttons

When you see one of these symbols next to your original message, click it to

jump straight to your reply (or forwarded message) You're spared the trouble of having to search through all your mailboxes

Incidentally, you may have noticed that Mail marks a message as having been

read the moment you click it You can change it back to unread by using its

shortcut menu—but there's also a more permanent workaround

If you hide the Preview pane by double-clicking the divider bar just above it,

Mail no longer marks messages "read" just because you clicked them in the list (You can bring back the Preview pane by double-clicking just above the vertical scroll bar, or by dragging the divider bar back up from the bottom.)

•

• Move all the members of a thread to a new mailbox simply by moving its heading You might find this useful, for example, when you've just finished a project and want to file away all the email related to it quickly (As a bonus, a circled number

tells you how many messages you're moving as you drag the heading.) You can even delete all the messages in a thread at once by deleting its heading

Figure 19-10 Threads have two parts: a heading (the subject of the thread, listed in dark blue when it's not selected) and members (the individual messages in the thread, listed in light blue and indented) Often, the main list shows only a thread's heading; click the flippy triangle to reveal its members

• Examine thread members from multiple mailboxes Normally, threads only

display messages held in the samemailbox, but that's not especially convenient when you want to see both messages (from your Inbox) and your replies (in your Sent box) To work around that problem, click Inbox, and then -click the Sent mailbox (or any other mailboxes you want to include) Your threads seamlessly combine related messages from all of the selected mailboxes

• Quickly collapse all threads by choosing View Collapse All Threads If your

main list gets cluttered with too many expanded threads, this is a quick way to force it into order (If, on the other hand, your main list isn't cluttered enough, choose View Expand All Threads.)

• Send someone all the messages in a thread by selecting the thread's heading and

clicking Forward Mail automatically copies all the messages of the thread into a new message, putting the oldest at the top You might find this useful, for instance, when you want to send your boss all the correspondence you've had with someone about a certain project

19.5.2 Adding the Sender to Your Address Book

When you choose the Message Add Sender To Address Book command, Mail

memorizes the email address of the person whose message is on the screen In fact, you can highlight a huge number of messages and add all the senders simultaneously using this technique

Thereafter, you'll be able to write new messages to somebody just by typing the first few letters of the name or email address

19.5.3 Data Detectors

Here's a cool step-saver, new in Leopard: a little something Apple likes to call data

detectors

In short, Mail recognizes commonly used bits of information that may appear in a

message: a physical address, a phone number, a date and time, and so on With one quick click, you can send that information into the appropriate Mac OS X program, like iCal, Address Book, or your Web browser (for looking an address up on a map)

Here's how it works When you spot a name, address, date, or time, point to it without clicking Mail draws a dotted rectangle around it Control-click inside the rectangle, or right-click, or click the pop-up at the right side

Figure 19-11 Mail can detect street addresses, phone numbers, dates, and times When it spots something you may want to add to another program like Address Book or iCal, it draws a dotted line around the info when you point to it without clicking Click the little to get a shortcut menu for further options—like automatically adding the address to your Address Book program or seeing the

address pinpointed on a Google map

As shown in Figure 19-11, a shortcut menu appears Its contents vary depending on what you're pointing to:

• A mailing address You can choose Show Map from the shortcut menu; your Web

browser opens automatically and shows you that address on a Google map

Alternatively, you can choose Create New Contact (to add an Address Book entry for this address) or Add to Existing Contact (if the person is in your Address

Book—just not the address) Like magic, a little editing box sprouts out of the data-detected rectangle, prefilled with the information from the message, so that you can approve it

Tip: If you highlight some text in the message and then click the pop-up

menu, Mail also fills in the Notes field in this person's Address Book entry with the highlighted text Wicked cool

• A date and time The shortcut menu offers two useful commands Create New iCal

Event opens Mac OS X's calendar program and creates a new appointment at the date and time identified in the message It's up to you to type a name for the date, set an alarm, and do all the other appointment-setting things described in Chapter

10

Tip: If, while working in iCal, you ever forget where this event came from,

double-click it In the Info balloon, you'll see a link that takes you right back to the original Mail message that started it all

If you choose Show This Date in iCal, though, you go to iCal, which opens

directly to the specified date and/or time The logic of this feature is

overwhelming; after all, when someone emails you to ask if you're free for drinks next Thursday at 10, what's the first thing you usually want to do? Check your calendar, of course

19.5.4 Opening Attachments

Just as you can attach files to a message, so people often send files to you Sometimes they don't even bother to type a message; you wind up receiving an empty email message with a file or two attached Only the presence of the file's icon in the message body tells you that there's something attached

Tip: Mail doesn't ordinarily indicate the presence of attachments in the Messages list It

can do so, however Just choose View Columns Attachments A new column appears in the email list—at the far right—where you'll see a paper-clip icon and the number of file attachments listed for each message

Mail doesn't store downloaded files as normal file icons on your hard drive They're actually encoded right into the mbox mailbox databases described on Section 19.5.11.2

To extract an attached file from this mass of software, you must proceed in one of these ways:

• New in Leopard: Click the Quick Look button in the message header Instantly,

you're treated to a nearly full-size preview of the file's contents Yes, Quick Look has come to email Its strengths and weaknesses here are exactly as described Chapter 1

Tip: If the attachments are pictures, clicking Quick Look gives you a full-screen

slideshow of every attached image.If you jiggle the mouse a little during the

slideshow, you get a useful row of buttons along the bottom of the screen, too; they're described on Section 1.8.3

• Click the Save button in the message header to save it to the Mac's Downloads

folder, nestled within easy reach in the Dock

Tip: If you don't want to use the Downloads folder, you can choose a new

autosave location for attachments by choosing Mail Preferences General Downloads

• Control-click (or right-click) the attachment's icon, and choose Save Attachment

from the shortcut menu You'll be asked to specify where you want to put it Or save time by choosing Save to Downloads Folder, meaning the Downloads folder

in the Dock

• Drag the attachment icon out of the message window and onto any visible portion

of your desktop (or any visible folder)

• Click the Save button at the top of the email, or choose File Save Attachments

(If the message has more than one attachment, this maneuver saves all of them.)

Tip: The Save button at the top of the Preview pane doubles as a pop-up menu; if

you click it and keep the mouse button pressed, you can select from several other options for saving the attachments—like importing them into iPhoto or

downloading only one of them

WORKAROUND WORKSHOP

Dial-up Blues

If you're among the few, the proud, who still connect to the Internet with a

dial-up modem, you may find that Mail is painfully slow at opening and reading email—and that it slows down other Internet programs, like your Web browser, whenever it checks for new mail

Fortunately, you can take a few steps to speed up Mail (and, indirectly, your other Internet programs):

Cut back on mail checks Choose Mail Preferences, click General, and change the "Check for new mail" pop-up to "Every hour," or even "Manually." That way, Mail won't tie up your phone line by trying to connect every five minutes

Whenever you have a choice, don't sign up for HTML email HTML mail takes far longer to arrive than plain email Therefore, if you ever sign up for

companies' email updates (like Apple's eNews bulletin or the New York Times's Circuits newsletter), choose to receive the messages as text, not HTML

Turn off graphics in formatted mail If you have no choice but to receive HTML messages, the least you can do is block the pictures, which are the biggest and slowest elements of a formatted message

To do that, choose Mail Preferences, click Viewing, and then turn off

"Display remote images in HTML messages." From now on, you'll see a special Load Images button at the top of the Preview pane whenever you select an HTML message If you feel that the empty boxes (where the graphics would have appeared) really deprive the message of its oomph, click that button to make Mail download all the images in the current message—this time only, because you've asked for them

Don't auto-download attachments If you use an IMAP, Mac, or Exchange account, you can set up Mail so it won't download attachments until you tell it

to

Open the Accounts pane of Mail's preferences, select your account, click

Advanced, and choose "All messages, but omit attachments" from the pop-up menu in the middle From now on, Mail won't download attachments unless you command it to do so

• Double-click the attachment's icon, or single-click the blue link underneath the

icon If you were sent a document (a photo, Word file, or Excel file, for example),

it now opens in the corresponding program

Note: After the attachment is open, use the File Save As command to save the file into a folder of your choice Otherwise, any changes you make to the

document won't be visible except when you open it from within Mail

• Control-click the attachment's icon From the shortcut menu, you can specify

which program you want to use for opening it, using the Open With submenu

19.5.4.1 When attachments don't open

If you're unable to open a file attachment, there are several possible reasons For starters, your correspondent's email program may have compressed or encoded the file so it takes less time to send

Mac OS X can open zip and other common compressed formats with a simple double-click But if the format is some wacky off-brand scheme, try dragging the attachment's icon onto that of StuffIt Expander, a little program that can gracefully decode just about any geeky Internet file (You can download it for free fromwww.stuffit.com.)

Some mysterious attachment types aren't necessarily hard to open For example:

• exe This denotes an executable file—more specifically, a Windows program Mac OS X itself can't run Windows programs If you have an Intel-based Mac and you've installed Boot Camp, Parallels, or VMW are Fusion (Chapter 8), of course, you can copy the file to the Dark Side and deal with it there

• .html A file whose name ends in html or htm is a Web page In the beginning,

Web pages hung out only on the Internet These days, however, you're

increasingly likely to find that you've downloaded one to your Mac's hard drive (It may be a software manual for some shareware, for example.) You can open it

by double-clicking; Mac OS X comes set to open all htm and html files in Safari

• .vcf A "business-card" file; see Section 19.10.1.2

If you've received a file with a three-letter code not listed here, you may well have a file that can be opened only by a Windows program that you don't own You might consider asking your correspondent to resend it in one of the more universal formats, such as the graphics formats JPEG and TIFF, or the text formats RTF and TXT In addition, any

layout, graphics, or text file can be turned into a PDF; if you're still having trouble

opening the attachment, ask your correspondent to send the attachment in that format instead

19.5.5 Replying to a Message

To answer a message, click the Reply button on the message toolbar (or choose Message Reply, or press -R) If the message was originally addressed to multiple

recipients, you can send your reply to everyone simultaneously by clicking Reply All instead

A new message window opens, already addressed As a courtesy to your correspondent, Mail places the original message at the bottom of the window, set off by a vertical bar, as shown in Figure 19-12

Tip: If you highlight some text before clicking Reply, Mail pastes only that portion of the

original message into your reply That's a great convenience to your correspondent, who now knows exactly which part of the message you're responding to

Figure 19-12 In Rich Text–formatted Mail messages (not to be confused with RTF [Rich Text Format] word processing format, which is very different), a reply includes the original message, marked in a special color (which you can change in Mail Preferences) and with a vertical bar to differentiate it from the text of your

reply

(In plain-text messages, each line of the reply is >denoted >with >brackets, although only your recipient will see them.) The original sender's name is automatically placed in the "To:" field The subject is the same as the original subject with the addition of Re: (shorthand for Regarding) You're now ready to type your response

At this point, you can add or delete recipients, edit the Subject line or the original

message, attach a file, and so on