Tài liệu Classroom Setup Guide for Course pptx

Before class begins, install and configure the instructor’s computer by using the following information and instructions.. Hardware The following hardware is the minimum required for th

Classroom Setup Guide for Course

1609A: Designing Data Services and Data Models

Classroom Requirements

This course requires a classroom with a minimum of one computer for the instructor Before class begins, install and configure the instructor’s computer

by using the following information and instructions

In addition to computing equipment, the classroom will need to be equipped with a flip chart with refill paper, several marking pens, and several packets of 3x3 or larger self-stick notes

Instructor Computer

The instructor computer requires the following hardware and software configuration

Hardware

The following hardware is the minimum required for the instructor computer:

! Pentium Pro or Pentium II 200 microprocessor

! PCI 2.1 bus

! 128 megabytes (MB) of RAM

! 4-gigabyte (GB) hard disk

! 256K L2 Cache

! 12X CD-ROM drive

! Network adapter

! 4-MB video adapter

! Super VGA (SVGA) monitor (17 inch)

! Microsoft Mouse or compatible pointing device

! Sound card with amplified speakers

! Internet access

! Projection display device that supports SVGA 800x600, 256-colors

Note

Software

The following software is required for the instructor computer:

# Microsoft Windows® 98

# Internet Explorer 5

# Microsoft Word 97 or later, or Microsoft Word Viewer 97

# Microsoft PowerPoint® 97 or later

You can substitute Windows 98 with Windows 95, Windows NT®

Workstation 4.0, Windows NT 4.0 Server, or Windows 2000

Setup Instructions

Use the following procedures to set up the instructor computer

Before You Begin

You will need to do the following:

# Read through all setup procedures

# Make sure that you have the Instructor compact disc that is provided with the course materials

Estimated time to set up the classroom: 2 hours

Instructor Computer Setup

! To set up the hardware

! Set up the hardware according to the manufacturer’s instructions (Refer to the hardware requirements.)

! Configure the hard disk as follows:

• Format drive C: with a FAT or NTFS partition size of at least 1.0 GB

! To install and configure Microsoft Windows 98

• Run the setup executable file Use the following table to guide operating system setup Respond to all other installation prompts by using defaults or options appropriate to the computer or your training facility

When this information is required Use

Workgroup Workgroup

If an operating system other than Windows 98 is used, leave the Administrator password blank

Note

Note

! To set the display properties

• Use the Display control panel to set the screen area to 800x600 pixels and the number of colors to 256 or higher

! To install and configure Internet Explorer 5

1 Install from the Instructor CD

2 Run the setup executable file and install using default options

3 When installation is complete, launch Internet Explorer to run the Internet Connection Wizard

If you use a proxy server, be sure to set Internet Explorer to bypass proxy server for local addresses

! To install and configure Microsoft Word 97 or later

1 Install from either a stand-alone or Microsoft Office version

2 Run the setup executable file and install using default options

Or

! To install and configure Microsoft Word Viewer 97

• Go to the CD_Student\WordView folder on the Instructor CD-ROM and run WD97VWR32.EXE

! To install and configure PowerPoint viewer

• Run the setup executable file from the Instructor CD and install using default options

! To install fonts for the PowerPoint presentation

1 After inserting the Instructor compact disc into the CD-ROM drive,

double-click My Computer

2 Right-click the CD-ROM drive icon and click Explore on the Shortcut

menu

3 Double-click the Fonts folder

4 Double-click Mocfonts.exe

5 Follow the on-screen prompts to install the fonts

6 Click OK when you have finished installing all the fonts

Instructor Compact Disc Contents

The Instructor compact disc contains the following files and folders:

autorun.exe file is double-clicked, this autorun opens the CD and allows you

to browse the Student or Instructor CD, or install Internet Explorer

Note

! Readme.txt This file contains a description of the CD’s contents in ASCII

format (non-Microsoft Word document)

description of classroom requirements, classroom setup instructions, and the classroom configuration

that you find in the course and how you have corrected those errors

PowerPoint presentation and Web-based materials

course

display the PowerPoint slides

installation of the supporting files for this course

Student Compact Disc Contents

The Student compact disc contains the following files and folders:

autorun.exe file is double-clicked, this autorun opens the CD and allows you

to browse the Student or Instructor CD, or install Internet Explorer

resources pertaining to this course

format (non-Microsoft Word document)

If there are no additional reading files, the AddRead folder does not appear

These files can be used to prepare the student computers for the hands-on

labs If there are no lab files, the Labs folder does not appear

for this course If this course does not include any multimedia presentations,

the Media folder does not appear

Windows Media™ Player

Framework (MSF) courses

! Practices This folder contains files that are used in the hands-on practices

These files may be used to prepare the student computers for the hands-on

practices If there are no practices, the Practices folder does not appear

course If there are no associated sample applications, the SampApps folder

does not appear

Web pages on the student CD If there is no sample code, the SampCode

folder does not appear

with this course If there is no sample code, the SampSite folder does not

appear

Microsoft Word document (.doc) files included on the compact disc

THIS PAGE INTENTIONALLY LEFT BLANK