Tài liệu TrueNet® IP Security pdf

Fiber Connectivity In the backbone or to the desk,optical networks achieve peakperformance with ADC’s high density frames, fiber connectors, patch cords, raceways, and panels featuri

1st Edition

w w w a d c c o m • + 1 - 9 5  - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1

Introduction 3

Featured Products Category 6 4–Pair Outdoor Cable 4

Limited Combustible Category 6 Cable 7

Copper Connectivity Solutions 11

CopperTen Category 6A Solutions 11

Category 6 Solutions 16

Fiber Connectivity Solutions 20

TFP Series Fiber Panels 20

RMG Series Fiber Panels 22

Accessories 23

Broadcast Connectivity Security Solutions 27

ICON® I-W Modular Wall Mount System 27

Wall Mount Bulkhead Panels 28

Connector Products 32

ADC Precision Connector Products 34

Connector Ordering Information 36

Cabling Solutions

world's first complete system

to meet the IEEE requirements for 10G Ethernet over 100 meters of the UTP cable.

Fiber Connectivity

In the backbone or to the

desk,optical networks achieve peakperformance

with ADC’s high density frames, fiber connectors,

patch cords, raceways, and

panels featuring integrated

cable management and bend radius protection.

Category 6 & 5e Ethernet

ADC's TrueNet Category

6 & 5e patch panels, patch cords, and cable are

impedance matched to deliver extra bandwidth

and better attenuation with zero bit errors.

Copper Cables

ADC’s high-performance riser

and plenum cable supports

backbone and horizontal

applications TrueNet copper

cables feature patented

enhance signal speed and

strength while minimizing

cable size and crosstalk.

Outdoor Cabling

ADC's outback cable is designed for outdoor use making it ideal for providing IP video to outdoor security cameras.

Internal Security

IP Cameras Card Readers Security Monitors Electronic Locks

Coax Video Solutions

ADC’s BNC video panels and connectos are recognized

as the industry leader in video performance.

Fiber Cables

Fiber cables including: cost saving interlocked armored versions, plenum rated dry loose tube small diameter Indoor/outdoor cables, single mode reduced water peak, and standard or laser optimized multimode configurations.

ADC’s TrueNet® IP Security Cabling System is the integrated portfolio of high-performance copper and fiber cable, connectivity, and cable management products from ADC The precisely tuned TrueNet system exceeds TIA/EIA standards and provides a clear path for uninterrupted IP data and video throughput within the entire network.

True End-to-End Solutions

The TrueNet system delivers proven cable, connectivity, and cable management solutions for fiber,

10 Gigabit Ethernet over UTP, and Category 6/5e from the data center to remote IP security devices.

The Outback cable is a 4-pair, 23 gauge Category

6 data cable designed for outdoor use The cable

combines excellent transmission performance and

weather resistant properties It is intended for

outdoor installation, in buried conduit or as aerial

cable making it ideal for outside security IP video

applications The core contains a water blocking

tape which isolates the core from moisture.

Features

Patented AirES® conductor insulation technology enables improved signal strength and speed with superior electrical performanceManufactured with lead free materials Moisture barrier core wrap protects pairs

Common Applications:

4/16 Mb/s Token Ring (IEEE 802.5)100VG-Any LAN (IEEE 802.12)10BASE-T (IEEE 802.3)52/155 Mb/s ATM (ATM Forum)

100 Mb/s TP-PMD

622 Mb/s ATM (ATM Forum)Broadband & Baseband Video1000BASE-T (Gigabit Ethernet)100BASE-T (“Fast Ethernet”)

1 Gigabit Networking System (WGNA)100BASE-T4 (“Fast Ethernet”)1.2 Gb/s ATM (ATM Forum)100BASE-TX (“Fast Ethernet”)

77 Channel Broadband Video

Category 6 4–Pair Outdoor Security Cable

Horizontal Cable Requirements

Reel – 1000 ft 42.5 kg/km (29 lbs./kft) TN6TOSP-BK02

O r d e r i n g I n f o r m a t i o n

Category 6 4–Pair Outdoor Cable

FREQ MHZ

FITTED IMPEDANCE Ohms

INSERTION LOSS dB/100 m

RETURN LOSS dB/100 m

PAIR-PAIR NEXT dB/100 m

PSNEXT dB/100 m

Spec Max Spec Min Spec Min Spec Min Spec

PSACR dB/100 m

PAIR-PAIR ELFEXT dB/100 m

PSELFEXT dB/100 m

LCL dB/100 m

Min Spec Min Spec Min Spec Min Spec Min

ADC’s TrueNet Category 6 Limited Combustible

Cable addresses some of the combustibility and

toxicity safety concerns that network installers

and users have raised regarding the proliferation

of traditional plenum cable Combustibility and

toxicity have long been an industry issue, and

as more and more cable proliferates, especially

in plenum or air-carrying environments, safety

concerns continue to trouble network installers

and users The long standing requirements

and de facto standard of NFPA 262 outline the

combustibility requirements allowable in plenum

spaces However, today many feel that this is

not enough In an effort to reduce this danger

to personnel and equipment further, many users

desire to specify limited combustible cabling

(CMP-50) beyond the basic plenum requirements

Through the use of AirES technology, ADC is

able to deliver its TrueNet Limited Combustible

cable that not only exceeds the CMP-50

standards, but also performs well beyond

Category 6 requirements.

ADC’s AirES technology is a unique patent

design that incorporates channels of air within

the insulation that run the length of the cable

and reduce the amount of material required to

insulate the conductor Since AirES cables require

less insulation material within the cable itself

(32% less) there is less material to burn Less fuel

means less smoke and less toxicity in air-return

environments In addition AirES improves virtually

every attribute associated with the structured

cabling system—signal strength and integrity,

easier installation, increased signal speed,

improved wire management, reduced crosstalk,

even reduced space requirements.

Applications

4/16Mbps Token Ring (IEEE 802.5) 10Base-T (IEEE 802.5)

100Mbps TP-PMD Broadband and baseband video 100Base-T (Fast Ethernet) 100Base-T4 (Fast Ethernet) 100Base-TX (Fast Ethernet) 100VG-AnyLAN (IEEE802.12) 52/155 Mbps ATM (ATM Forum) 622Mbps ATM (ATM Forum) 1000Base-T (Gigabit Ethernet) 1Gbps Networking System (WGNA) 1.2Gbps ATM (ATM Forum)

77 Channel broadband video

Compliances

UL Subject 444 (UL)-C(UL) Type CMP ICEA S-90-661 NEC 800 Type CMP ISO/IEC 11801 Class E ETL verified TIA/EIA-568-B.21-1 Category 6 horizontal cable requirements

Limited Combustible Category 6 Cable

Insertion Loss dB/100 m

Return Loss dB/100 m

Pair-Pair NEXT dB/100 m

PSNEXT dB/100 m

PSACR dB/100 m

Pair-Pair ELFEXT dB/100 m

PSELFEXT dB/100 m

LCL dB/100 m

Limited Combustible Category 6 Cable

4-pair cable, clear jacket: Nominal OD: 0.205 inches (5.2 mm) Maximum Average OD: 0.205 inches (5.2 mm)

Reel packaging – 1000 ft spool 31 TN6ESD-CL02

4-pair cable, Blue jacket: Nominal OD: 0.205 inches (5.2 mm) Maximum Average OD: 0.205 inches (5.2 mm)

Reel packaging – 1000 ft spool 31 TN6ESD-BL02

O r d e r i n g I n f o r m a t i o n

An integral part of ADC’s TrueNet Structured Cabling System, CopperTen® is the world’s first

Augmented Category 6 Structured Cabling System to enable 10 Gigabit Ethenet over a full 100 meters

of UTP cable Installed in high performance networks worldwide, the system’s patent-pending design minimizes alien crosstalk and insertion loss and meets the performance requirements of IEEE 802.3an and TIA 568-B.2-10 draft standards.

Data Cables

Patch Panels

Data Cables

XX = Jacket Color: BL = Blue, WT = White, GY = Gray, GN = Green, YL = Yellow, RD = Red

YY = Length: 02 = 1000 ft, 04 = 2000 ft, 05 = 2500 ft

1 RU 24-port Patch Panels

Rear wire manager included

•

•

•

•

Copper Connectivity Solutions

TrueNet® CopperTen® Category 6A Structured Cabling Systems Modular Jacks

Patch Cords

Modular Jacks

XX = Jack Color: 01 = White, 02 = Ivory, 03 = Gray, 04 = Black, 05 = Red, 06 = Blue, 07 = Green, 08 = Yellow,

09 = Violet, 10 = Orange

RJ45-RJ45 UTP patch cord

X = Color: 0 = White, 1 = Red, 2 = Blue, 3 = Yellow, 4 = Green, 6 = Gray

Snagless plug design with built-in strain relief

UL 1863 safety ratingMeets performance requirements of TIA/EIA 568-B.2-10 draft standards

•

•

•

•

Faceplate Mounting Options

Termination Block

4-pair to 4-pair blue patch cord 6451 2 401-XX

XX = Length: 10 = 4 ft, 20 = 7 ft, 30 = 10 ft, 40 = 15 ft

O r d e r i n g I n f o r m a t i o n

Faceplate Mounting Options

XX = Color: WT = White, IV = Ivory, GY = Gray, BK = Black

Designed to support 10 Gigabit performance by countering negative effects of alien crosstalk

•

•

•

•

CopperTen Augmented Category 6 8-Pair Block

Copper Connectivity Solutions

TrueNet® CopperTen® Category 6A Structured Cabling Systems

Design for use with ADC TrueNet Universal Mounting System (UMS) and Type 105 Rod-Mount Bracket

20 year TrueNet CopperTen warranty

O r d e r i n g I n f o r m a t i o n

BX (Box=10 each)

A key component of the TrueNet channel solution, ADC’s highest performing termination block, offers versatility not possible with patch panels The CopperTen 8-pair block’s unique center port eliminates the need to remove cables for testing and because patch cords are “temporary”, the system saves thousands over traditional patched solutions Installations are hardwired providing the cleanest, most secure, reliable and high performing Category 6a system available.

High-density design with 24 ports in a single rack unit

Unique polymer design helps eliminate alien crosstalk

Rear cable manager included

The CopperTen Augmented Category 6 Angled Patch Panel optimizes 10 Gb/s transmission

performance with offset jack positioning to counter the negative effects of alien crosstalk The angled port design improves all aspects in managing horizontal cable and patch cables while improving density when used with Glide Cable Management It also makes modifications easy, avoids unintended disconnects and cable damage, and protects bend radius to avoid violations that result in signal degradation.

An integral part of ADC’s TrueNet Structured Cabling System, CopperTen is the world’s first

UTP structured cabling system to enable 10 Gigabit Ethernet over a full 100 meters Installed in high-performance networks worldwide, the system’s patent-pending design minimizes alien crosstalk and insertion loss and meets the performance requirements of IEEE 802.3an and TIA 568-B.2-10 draft standards

Copper Connectivity Solutions

TrueNet® Category 6 Structured Cabling Systems

The TrueNet Category 6 solution is a fully integrated family of precisely tuned components each designed

to operate at optimum performance with the other This solution is unmatched in data throughput and is supported by the most comprehensive and thorough warranty in the industry: the TrueNet Zero Bit-Error warranty The warranty guarantees that the structured cabling system will remain error free for a full 5 years and includes a 20-year electrical performance and free of defect warranty The result is a remarkable advanced and high performing end-to-end channel guaranteed beyond the typical industry requirements

to maximize network throughput and minimize downtime Numerous component options are available for versatility and flexible adaptation to meet any infrastructure requirement.

Data Cables

Patch Panels

Data Cables

XX = Jacket Color: BL = Blue, WT = White, GY = Gray, GN = Green, YL = Yellow, RD = Red

YY = Length: 02 = 1000 ft, 04 = 2000 ft, 05 = 2500 ft, RB = 1000 ft reel in a box

1 RU 24-port Patch Panels

Rear wire manager includedDesigned to support gigabit ethernet transmission speeds

•

•

•

•

Right/left angle patch panel

O r d e r i n g I n f o r m a t i o n

KM8 RJ45 UTP modular 568A/B jack

XX = Color: WT = White, IV = Ivory, GY = Gray, BK = Black

O r d e r i n g I n f o r m a t i o n

Features

Patented right/left angle eases stress

on patch cords allowing for easy cable management

45-degree silver-plated IDCs provide secure reliable gas-tight connections

Wire can be terminated with either a KRONE

or 110 toolUniversal A/B wiring label

•

•

•

•

Copper Connectivity Solutions

TrueNet® Category 6 Structured Cabling Systems

Patch Cords

Highband® 25 Blocks

RJ45-RJ45 plug UTP PVC patch cord

300-pair field assembly kit with back mount frame 6450 1 101-00

O r d e r i n g I n f o r m a t i o n

Features

Impedance matched patch cord for maximum throughput

Patented AirES Technology

Up to 28% smaller outer diameter than other patch cords

UL 1863 listed and Category 5e performance verified

•

•

•

Faceplate Mounting Options

Ultim8 blocks

96-pair (24-port) field assembly kit, universal mounting system 6636 1 596-46

Patch Cords

Ultim8 - Ultim8 UTP straight through TP6TH-XXYY

XX = Color: BL= Blue, WT = White, GY = Gray, GN = Green, YL = Yellow, RD = Red

4-port all-fit surface mount box 6644 1 224-XX

XX = Color: 01 = White, 02 = Ivory, 03 = Gray, 04 = Black, 22 = Electrical Ivory

See ADC TrueNet Catalog for a wide range of faceplates, surface mount boxes and multimedia boxes

O r d e r i n g I n f o r m a t i o n

Features

Test port provides “look-both-ways” testing and circuit monitoring using ADC test cordsPerformance exceeds TIA/EIA Category 6 component specifications

Provides unique patch-by exception functionality

•

•

•

Fiber Connectivity Solutions

TrueNet® TFP Series Fiber Panels

The TrueNet Fiber Connectivity portfolio is a

diverse family of products designed to operate

at optimum performance with each other This

solution is supported by the most comprehensive

and thorough warranty in the industry: the

TrueNet Zero Bit-Error Warranty The warranty

guarantees that the structured cabling system

will remain error free for a full 5 years and

includes a 20-year optical performance and free

of defect warranty The result is a remarkable

advanced and high performing end-to-end

channel guaranteed beyond the typical industry

requirement to maximize network throughput

and minimize downtime Numerous standard

component options are available for versatility

and flexible adaptation to meet any infrastructure

requirement

Configurations and catalog numbers listed below

are considered part of the TrueNet Fiber standard

portfolio and are readily available.

Features

Utilizes angle-left/angle-right adapters for easy access and bend radius protection Completely modular footprint for ease of use and maximum versatility

Rear access makes field termination or splicing fast and efficient

Best application: mounted in cabinets to

consolidate fiber from servers, switches, routers and SANs

•

•

•

•

Termination only empty chassis; black

1 RU, accommodates 2 TFP modular adapter packs; black TFP-1UT00-000B

2 RU, accommodates 4 TFP modular adapter packs; black TFP-2UT00-000B

5 RU, accommodates 12 TFP modular adapter packs, T-handle; black TFP-5TT00-000B

TFP adapter packs

Loaded with 12 multimode LC (beige) adapters (total 24 fiber terminations)

Loaded with 6 multimode SC duplex (beige) adapters (total 12 fiber terminations)

Loaded with 12 multimode LC (aqua) adapters (total 24 fiber terminations)

Loaded with 6 multimode SC duplex (aqua) adapters (total 12 fiber terminations)

Loaded with 12 singlemode LC duplex (blue) adapters (total 24 fiber terminations)

Loaded with 6 singlemode SC duplex (blue) adapters (total 12 fiber terminations)

O r d e r i n g I n f o r m a t i o n