Tài liệu Central Office Copper Cable pdf

DS1 VDSL-Grade Transport System Cable100 Ω Category 5e 24 AWG FtP Riser Cable specifications CONSTRUCTION CHARACTERISTICS Conductors: 24 AWG solid tinned copper .51 mm .0200” Insulat

Trang 1

Central Office Copper Cable

2nd Edition

Trang 3

Introduction 1

DS1 VDSL-Grade Transport System Cable 100 Ω Category 5e 24 AWG FtP Riser Cable 2

100 Ω 26 AWG FtP Riser Cable 4

DS1/DS1C/DS2 Transport System Cable 100 Ω Category 3 22 AWG Dual shield FtP Riser Cable (600C Equiv.) 6

100 Ω Category 3 24 AWG FtP tight twist Riser Cable (1161A Equiv.) 8

100 Ω Category 3 24 AWG FtP Riser Cable 10

100 Ω Category 3 24 AWG Dual shield FtP Riser Cable (1116A Equiv.) 12

100 Ω 26 AWG Dual shield FtP Riser Cable (1249C Equiv.) 14

High Performance Switchboard Cable 100 Ω Category 5 24 AWG utP Riser Cable 16

100 Ω Category 3 24 AWG utP Riser Cable 20

Enhanced Performance Switchboard Cable 100 Ω Category 3 22 AWG utP Riser Cable 22

100 Ω 26 AWG utP Riser Cable (800A Equiv.) 26

90° C Enhanced Performance Switchboard Cable 100 Ω Category 3 22 AWG utP Riser Cable 28

100 Ω Category 3 24 AWG utP Riser Cable (1006A Equiv.) 30

100 Ω 26 AWG utP Riser Cable (1000A Equiv.) 32

Standard Switchboard Cable 100 Ω 24 AWG utP Riser Cable 34

85 Ω 24 AWG Dual shield FtP Riser Cable (1107B Equiv.) 36

85 Ω 24 AWG FtP Riser Cable 38

Backbone Cable 100 Ω Category 5 24 AWG utP Riser Cable 40

Horizontal and Backbone Cable 100 Ω Category 3 24 AWG utP Riser Cable 42

100 Ω Category 3 24 AWG utP Plenum Cable 44

100 Ω Category 1 24 AWG utP Plenum Cable 50

Table of Contents

Trang 5

Features and Benefits

• Exceptional 85- and 100-Ohm series cables for both analog and digital services

• ideally suited for Ds1, Ds2, xDsl and all broadband services

• innovative and flexible designs

• non-plenum or plenum-rated, low-heat release cables

• shielded or unshielded

• Meets or exceeds ul requirements

• Cables available that meet or exceed telcordia ® requirements

• superior-quality recognized through inclusion on service provider and original equipment manufacturer approved vendor lists (Avls)

• Available direct from the manufacturer or through distribution and cable assembly houses

• Competitive lead times and low minimum order quantities

• superior customer service and technical support

• Offers improved crosstalk and attenuation performance to deliver the bandwidth required for digital voice, data and video

• Consistent product quality

- no missing insulation, no excess adhesion

- tangle-free, kink-free

- Jacket and insulation concentricity and cable roundness

- small outside diameter and cross-sectional area in bundles and cable

- streamlined engineering, production, and quality processes

- in-process manufacturing quality inspections

• Meets or exceeds industry requirements and environmental regulations

- Heavy-metal free (i.e cadmium, lead, mercury, etc)

- Compliant to Directive 2002/95/EC Restriction of the use of certain Hazardous substances (RoHs) and other known environmental regulations

• Provides exceptional design and enhanced electrical and mechanical performance

• Adheres to strict industry tolerance standards and customer specifications for use throughout major service provider networks around the world

Trang 6

DS1 VDSL-Grade Transport System Cable

100 Ω Category 5e 24 AWG FtP Riser Cable

specifications

CONSTRUCTION CHARACTERISTICS

Conductors: 24 AWG solid tinned copper 51 mm (.0200”)

Insulation diameter: 0.97 mm (.038”) nominal

Pairing: 39.4 twists/m (12 twists/ft) minimum

Color-coding: standard telephony, solid colors

Shielding: Aluminum/polyester foil, face in, 25% overlap

Drain wire: 24 AWG solid tinned copper

Rip cord: Applied under jacket

Inner jacket: lead-free, flame retardant PvC

Outer jacket: lead-free, flame retardant PvC

ELECTRICAL CHARACTERISTICS

Conductor DC resistance @ 20º C (68° F) (maximum): 9.38 Ω/100 m (28.6 Ω/1000 ft)

Resistance unbalance (maximum): 5%

this cable is designed for terminating outside

plant networks to digital switching and

transmission equipment at the service provider’s

central office, outdoor cabinets and at the

customer’s premises this design offers true tiA

Category 5e performance to support digital

subscriber line (xDsl) technologies, particularly

vDsl and vDsl2 the quality, performance, size

and flexibility of this cable makes it an excellent

choice for terminating broadband equipment for

deployment of digital video, data and voice

Compliances

• ul subject 444/CsA C22.2 no 214

• (ul)-C(ul) type CMR/CMG

• nEC 800 type CMR

Trang 7

Description

Number

of Pairs

Unit Makeup

Outer Diameter

mm (inches)

Weight kg/km (lbs/1000') Catalog Number* Category 5e

24 AWG FTP riser cable

Jacket color: YY*

Packaging: reel

25 2 / 8 / 15 13.0 mm (.51") 123 kg (183 lbs) B5EtRA-2524YYXX

* to designate jacket color, replace yy as follows:

Bl = Blue, Gy = Gray, Wt = White

to designate reel length, replace XX as follows:

02 = 304 m (1000') 04 = 609 m (2000') 05 = 762 m (2500') 06 = 914 m (3000') 10 = 1524 m (5000')

O r d e r i n g I n f o r m a t i o n

Frequency (MHz)

Attenuation (dB/100 m) Maximum

Return Loss (dB) Minimum

PSNEXT (dB) Minimum

PSELFEXT (dB) Minimum

Trang 8

Shielding: Aluminum/polyester foil, face in, 25% overlap

Inner jacket: lead-free, flame retardant PvC

Outer jacket: lead-free, flame retardant PvC

this cable is designed for terminating

outside plant networks to digital switching

and transmission equipment at the service

provider‘s central office, outdoor cabinets and

at the customer‘s premises this design offers

exceptional electrical performance to support

digital subscriber line (xDsl) technologies,

particularly vDsl and vDsl2 the quality,

performance, size and flexibility of this cable

makes it an excellent choice for terminating

broadband equipment for deployment of digital

video, data and voice

Compliances

• nEC 800 type CMR

100 Ω 26 AWG FtP Riser Cable

Trang 9

Outer Diameter

mm (inches)

Weight kg/km (lbs/1000') Catalog Number*

PSELFEXT (dB) Minimum

PSFEXT (dB) Typical

100 Ω 26 AWG FtP Riser Cable

Trang 10

DS1/DS1C/DS2 Transport System Cable

100 Ω Category 3 22 AWG Dual shield FtP Riser Cable (600C Equiv.)

specifications

Conductors: 22 AWG solid tinned copper

Insulation: Polyolefin with a lead-free PvC skin

Insulation diameter: 1.2 mm (.049”) nominal (2 pair and up)

Pairing: 8.2 twists/m (2.5 twist/ft) minimum

Shielding: Dual aluminum/polyester

Color-coding: standard telephony, bandmarked

Rip cord: non-hygroscopic and non-wicking

Jacket: lead-free, flame retardant PvC

Jacket thickness: .76 mm (.030”) nominal

this cable is commonly used as digital

transmission cable for Ds1/t1, Ds1C and Ds2

frequencies this design offers true tiA Category

3 electrical performance to support applications

in which t1 speeds and low-loss shielded cable is

required Dual aluminum/polyester foil provides

superior shielding performance to reduce signal

• two to four-pair, tiA/EiA-568-B.2

Category 3 Horizontal Cable

• Over four-pair, tiA/EiA-568-B.2

Category 3 Backbone Cable

• tiA/EiA 464-B DsX-1 Pulse Wave shape

Compliance at 650 feet

• telcordia ® GR-499 DsX-1 Pulse Wave shape

• telcordia technical Audit Report Au-885

Compliance testing to GR-137-CORE; Ds1 Waveform Compliance testing at 650 feet

Trang 11

22 AWG dual shield FTP riser cable (600C equiv.)

Jacket color: gray Packaging: reel

SRL (dB) Minimum

NEXT (dB) Minimum

3-Pr

1 unit2 unit

3 unit4

unit unit

5-Pr 25-Pr

unit 1 = Pairs 1-25, Blue Binder

unit 1 = Pairs 1-20, Blue Binder unit 2 = Pairs 21-40, Orange Binder unit 3 = Pairs 41-56, Green Binder

56-Pair

Blue binders around

3

unit

1 unit2

100 Ω Category 3 22 AWG Dual shield FtP Riser Cable (600C Equiv.)

Trang 12

FTP DS1/DS1C/DS2 Transport System Cable

100 Ω Category 3 24 AWG FtP tight twist Riser Cable (1161A Equiv.)

specifications

Insulation: Flame retardant Polyolefin

Insulation diameter: 0.97 mm (.038") nominal

Shielding: single aluminum/polyester, face out

Jacket thickness: 0.762 mm (.030") nominal

frequencies in switching and transmission

equipment this design offers true tiA Category

in which t1 speeds and low-loss shielded cable

is required this product provides enhanced

crosstalk and attenuation over traditional Ds1

• telcordia ® technical Audit Report DA-1385

Compliance testing to GR-137-CORE; Ds1 Waveform Compliance testing at 550 feet

Trang 13

24 AWG FTP tight twist riser cable (1161A equiv.)

NEXT (dB) Typical

PSNEXT (dB) Typical

Trang 14

Insulation: Polyolefin with a lead-free PvC skin

Insulation diameter: 1 mm (.040”) nominal

Pairing: 8.2 twists/m (2.5 twists/ft) minimum

Shielding: single aluminum/polyester, face out

is required this product provides enhanced

attenuation over traditional Ds1 cable products

• nortel nPs 90934 Approved Product

100 Ω Category 3 24 AWG FtP Riser Cable

Trang 15

3 unit4

unit

1 unit2 unit

3 unit4

5-Pr 25-Pr

7-Pr 25-Pr

50-Pair unit 1 = Pairs 1-12, Blue Binder

unit 2 = Pairs 13-25, Blue Binder unit 3 = Pairs 26-37, Orange Binder unit 4 = Pairs 38-50, Orange Binder

unit 1 = Pairs 1-25, Blue Binder unit 2 = Pairs 26-50, Orange Binder unit 3 = Pairs 51-75, Green Binder unit 4 = Pairs 76-100, Brown Binder

Trang 16

Insulation: lead-free, semi-rigid PvC

Insulation diameter: 1 mm (.040”) nominal

100 Ω Category 3 24 AWG Dual shield FtP Riser Cable (1116A Equiv.)

Trang 17

Outer Diameter

mm (inches)

Weight kg/km (lbs/1000') Catalog Number* Category 3

24 AWG dual shield

100 Ω Category 3 24 AWG Dual shield FtP Riser Cable (1116A Equiv.)

Trang 18

Jacket: Dual, lead-free, flame retardant PvC

equipment the cable is designed for switching

and transmission equipment cabling for

telephone central offices, but can also be used

in campus or premises environments in which t1

speeds and low-loss shielded cable is required

Compliances

• telcordia ® technical Audit Report Au-833

Compliance testing to GR-137-CORE

• telcordia GR-499 DsX-1 Pulse Wave shape

100 Ω 26 AWG Dual shield FtP Riser Cable (1249C Equiv.)

Trang 19

Outer Diameter

mm (inches)

Weight kg/km (lbs/1000') Catalog Number*

26 AWG dual shield FTP riser cable (1249C equiv.)

Trang 20

Rip cord: Applied under the jacket

Filler: Round hollow tube (25-pair only)

Jacket: lead-free, flame retardant PvC, overall

transmission equipment at the service provider‘s

central offices, outdoor cabinets and customer‘s

premises With true tiA Category 5 electrical

performance, this cable offers enhanced crosstalk

and attenuation in a 100-Ohm design for

supporting digital subscriber line (xDsl)

technologies the enhanced crosstalk

performance improves the network support

for shared-sheath technologies

Category 5 Backbone Cable Requirements

High Performance Switchboard Cable

100 Ω Category 5 24 AWG utP Riser Cable

Trang 21

24 AWG UTP riser cable

Trang 22

Shielding: single aluminum/polyester, face in

Color-coding: standard telephony

performance, this cable offers enhanced

crosstalk and attenuation in a 100-Ohm design

for supporting digital subscriber line (xDsl)

• tiA/EiA-568-B.2 Category 3 Backbone Cable

Trang 23

24 AWG FTP riser cable

Trang 24

Color-coding: standard telephony

technologies Due to its small outside diameter

and flexibility, this product is well-suited for

installations in which space is limited and the

dimensions of the enclosure must be maintained

• tiA/EiA-568-B.2 Category 3 Backbone Cable

Trang 25

Description Number of Pairs Unit Makeup Outer Diameter mm (inches)

Jacket color: gray Packaging: reel or bulk put-up

Trang 26

Enhanced Performance Switchboard Cable

Trang 27

Trang 28

Trang 29

Description Number of Pairs Unit Makeup Outer Diameter mm (inches)

24 AWG

UTP riser cable

Jacket color: gray

Trang 30

premises this 100-Ohm design is excellent for

switchboard cable assemblies, central office

wiring for POts, Fractional t1 and Basic Rate

100 Ω 26 AWG utP Riser Cable (800A Equiv.)

Tiêu đề	Central Office Copper Cable
Trường học	ADC Telecommunications
Thể loại	Tài liệu
Năm xuất bản	2007

Định dạng
Số trang	60
Dung lượng	1,82 MB