1. Trang chủ
  2. » Công Nghệ Thông Tin

Tài liệu SONEPLEX ACCESS MULTIPLEXER SYSTEM pptx

8 371 0
Tài liệu đã được kiểm tra trùng lặp

Đang tải... (xem toàn văn)

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Tiêu đề System overview
Năm xuất bản 1998
Định dạng
Số trang 8
Dung lượng 251,3 KB

Các công cụ chuyển đổi và chỉnh sửa cho tài liệu này

Nội dung

The Soneplex SystemFEATURES • Optimized for DS1 or DS3 service access with transparent LAN capability over optical fiber • Centralized management for provisioning, diagnostics and alarms

Trang 1

The Soneplex System

FEATURES

• Optimized for DS1 or DS3 service access with transparent

LAN capability over optical fiber

• Centralized management for provisioning, diagnostics and alarms

• Low cost single stage SONET multiplexing

Trang 2

2 2/98

465

The Soneplex Access Multiplexer System breaks the barrier between customer and carrier networks by being the first to integrate LAN support into SONET access rings

By using advanced SONET technology, the Soneplex AM System requires less space and power while delivering services at a lower cost and higher reliability than conventional SONET multiplexers Centralized management provides network control for a high quality subscriber-based service Optimized for DS1, DS3, STS-1 and transparent LAN service access, the Soneplex AM is ideal for SONET local loop applications

The Soneplex AM System’s extremely compact design is suitable for rack, wallmount, or cabinet enclosures, and the Micro, Standard and Extended chassis are fully compatible with each other Simply changing fiber interface cards allows for in-service upgrade from OC-3 to OC-12 without taking down the network Other features of the Soneplex

AM System include: card edge technology, removable connector cards, emergency power feed, convection cooling, fiber spooling kit, front access, and full remote manage-ment and provisioning capability

Description

An XTD chassis is used at the central office to terminate DS1, DS3, or STS-1 high-speed traffic At a tenant high-rise building, a STD chassis is used to deliver data services Supporting 10Base-T or 100Base-T interfaces, the STD chassis is ideally suited for Internet Service Providers Optimized for wireless/PCS applications or small capacity customer locations, the Micro offers both space and power efficiency for low-density DS1 service access

Soneplex OC-3/OC-12 RING

Small Customer Location

Soneplex AM MICRO Wall mount

Soneplex AM MICRO

Wireless/PCS Site

Soneplex AM XTD

Central Office

Internet Service Provider

Soneplex AM STD

High Rise Building

Soneplex AM STD

PBX

Trang 3

Overview

The Soneplex AM System provides a broad range of service access options over fiber, with significantly more capacity than standard point-to-point multiplexers The product line offers advanced SONET OC-3/OC-12 add/drop multiplexer capabilities in a modular, flexible, and upgradeable package Three models support DS1, DS3, and STS-1 deploy-ment over SONET path protected rings The ring configuration permits multi-customer support at significantly lower cost than point-to-point implementations The three models are interoperable and meet small-, medium-, and large-scale service require-ments The central office is typically equipped with STD or XTD models, while customer premises can be equipped with any of the three, depending on the user's requirement It's single-stage multiplexing architecture permits a simplified hardware design, greatly reducing the number of components needed for implementation Where a competitive system would require many components such as CPU, mapper, STS-1 line, STS optical, and STS shelf modules, the Soneplex AM System requires only a controller unit, an optical interface module and a user interface module The reduced module set provides higher reliability and lower cost than existing multiplexers The reliability of the Soneplex AM System is the fault tolerant backplane, module backup with 1x7 and 1x3 protection, and fast recovery ring topology Circuit recovery from a ring segment failure

is less than 50 milliseconds The modular design permits flexible configuration, and future upgrade to services like ATM, Ethernet and Fast Ethernet Upgrade from OC-3 to OC-12 requires a simple card swap and can be accomplished without service interrup-tion

All three models are extremely compact and cost-effective to deploy Remote configura-tion, provisioning, management, monitoring and software upgrade capabilities of all models contribute to superior performance and reduced cost of support All models use the overhead SONET data communication channel (DCC) for communication between nodes, and facilitating centralized management The Soneplex AM is data communica-tion channel tested by the SONET Interoperability Forum (SIF) allowing compatibility with other vendors SONET network elements

The Soneplex AM VUE Network Management and Provisioning System is the most sophisticated SONET management tool on the market It provides "point and click" control, substantially reducing training and operations costs for both service providers and users The Soneplex AM VUE requires only a low cost Microsoft Windows™ desktop or portable PC platform, but is more powerful than many workstation based solutions It provides network provisioners and managers the tools to ensure maximum service levels while minimizing operational support costs

Trang 4

4 2/98

465

The Soneplex AM Micro Chassis is the smallest SONET platform in the industry It's a size and cost-reduced package specifically designed for low density cabinet, PCS/Cellular and customer premises applications Fully compatible with the STD and XTD chassis, it uses the same network management and user modules The Micro is also available in a wall mount version, featuring a lockable front security cover, AC/DC rectifier, a DSX cross-connect panel and eight hours of battery reserve

Soneplex Access

Multiplexer Micro

Specifications (OC-3/OC-12 System Capacity) DS1 Capacity:

DS3 Capacity (OC-3/OC-12):

Ethernet Capacity:

OC-3c Capacity:

Dimensions (WxHxD) Micro Chassis:

Optional Wall Mount Unit:

Operating Temperature:

Operating Humidity:

Operating Voltage:

Operational Support Systems:

4 or 7 with optional protection

1 with optional protection

2 (10/100 Mb)

1 7.09" x 8.67" x 9.85" (18 cm x 22 cm x 25 cm) 18" x 19" x 8" (46 cm x 48 cm x 20 cm) -40 ° F to 149 ° F (-40 ° C to 65 ° C) 5% to 95%, non-condensing -20 to -70 VDC

asynchronous terminal (V.24/V.28), X.25 and, TCP/IP

Soneplex Access

Multiplexer

Standard

The Soneplex STD is a cost-effective solution for broadband access requirements The STD chassis is commonly used at the central office, customer buildings and for high-capacity PCS/Cellular applications

*Path Protected Mode/Bandwidth Reuse Mode

Specifications (OC-3/OC-12 System Capacity) DS1 Capacity:

DS3 Capacity:

Ethernet Capacity (10 Mb):

Ethernet Capacity (100 Mb):

OC-3c Capacity:

Dimensions (WxHxD):

Operating Temperature:

Operating Humidity:

Operating Voltage:

Operational Support Systems:

28 with optional protection

3 with optional protection 9

3/6*

1/2*

14.18" x 8.67" x 10.25" (36 cm x 22 cm x 26 cm) -40 ° F to 149 ° F (-40 ° C to 65 ° C)

5% to 95%, non-condensing -20 to -70 VDC

asynchronous terminal (V.24/V.28), X.25 and, TCP/IP

Trang 5

The Soneplex XTD chassis provides carriers with a cost-effective platform which allows access to the full OC-3/OC-12 payload at central office or large customer buildings The XTD chassis is designed to be used either as a complete network solution or in conjunc-tion with the other members of the Soneplex AM family

Soneplex Access

Multiplexer

Extended

*Path Protected Mode/Bandwidth Reuse Mode

Specifications

DS1 Capacity:

DS3 Capacity:

Ethernet Capacity (10 Mb):

Ethernet Capacity (100 Mb):

OC-3c Capacity:

Dimensions (WxHxD):

Operating Temperature:

Operating Humidity:

Operating Voltage:

Operational Support Systems:

OC-3 System Capacity

84 with optional protection

3 with optional protection 23

3/6*

1/2*

14.18" x 20.88" x 10.25"

(36 cm x 53 cm x 26 cm) -40 ° F to 149 ° F (-40 ° C to 65 ° C) 5% to 95%, non-condensing -20 to -70 VDC

asynchronous terminal (V.24/V.28), X.25 and, TCP/IP

OC-12 System Capacity

84 with optional protection

12 with optional protection 23

12/18*

4/8*

14.18" x 20.88" x 10.25" (36 cm x 53 cm x 26 cm)

Trang 6

6 2/98

465

Soneplex Access Multiplexer Chassis

Soneplex AM-STD Shelf kit Soneplex AM-Micro Shelf Kit Soneplex AM-XTD Shelf Kit Soneplex AM-Micro Shelf Kit (DS3) Soneplex AM-Micro (DS1) Shelf + Battery/Wall mount Kit - 110V Soneplex AM-Micro (DS3) Shelf + Battery/Wall mount Kit - 110V

Monitor and Control Unit Optical Interface Modules

OC-3 OAU-IR 1310nm Laser Optics Card - 13dB OC-3 OAU-IR 1310nm Laser Optics Card - 19dB OC-3 OAU-LR 1310nm Laser Optics Card - 28dB OC-3 OAU-LR 1550nm Laser Optics Card - 28dB OC-12 OAU-IR 1310nm Laser Optics Card - 13dB OC-12 OAU-LR 1310nm Laser Optics Card - 25dB OC-12 OAU-LR 1550nm Laser Optics Card - 25dB OC-12 XTD/OAU-IR 1310nm Laser Optics Card - 13dB OC-12 XTD/OAU-LR 1310nm Laser Optics Card - 25dB OC-12 XTD/OAU-LR 1550nm Laser Optics Card - 25dB Note: When specifying optic interface modules and product descriptions, XX must be replaced with ST, SC, or FC to desig-nate the type of fiber optic connector required.

User Interface Modules

4 DS1 Mapper DSX module

7 DS1 Mapper DSX module

1 DS3 Mapper DSX module

4 DS1 Mapper DSX - ESF/SF PM module

7 DS1 Mapper DSX - ESF/SF PM module

10 Base-T Ethernet Mapper (Version 2.1.5)

100 Base-TX Fast-Ethernet Mapper

100 Base-FX Fast-Ethernet - Multimode-SC Duplex XTD-STS-3 Buffer Card

1 EC1 Mapper - Bulk Mapping module

1 EC1 Mapper - VT Path Switching module OC-3c MM Mapper - Multimode-SC Duplex OC-3c IR Tributary Card - Singlemode-ST

Accessories

Soneplex AM STD Locking Wall mount Cover Soneplex AM PWR - Duplicated AC/DC with Battery - 110V Soneplex AM PWR - Duplicated AC/DC without Battery - 110V Soneplex AM PWR - Duplicated AC/DC with Battery - 220V Soneplex AM PWR - Duplicated AC/DC without Battery - 220V Fiber Management Spool kit

Cable Guide Cover for 19" Rack (2) Cable Guide Cover for 23" Rack (2) AUX1 (Power/Fail Alarm Card) AUX2 (Customer Alarm Input/Output Card)

SPP-804101/5 SPP-804150/5 SPP-804108/5 SPP-804153/5 SPP-804155/5 SPP-804156/5 SPP-800300

SPP-800310/3XX SPP-800311/3XX SPP-800318/2XX SPP-800317/2XX SPP-800510XX SPP-800511XX SPP-800512XX SPP-800513XX SPP-800514XX SPP-800515XX

SPP-800320/4B SPP-800320/7 SPP-800330/3 SPP-800324 SPP-800327 SPP-800340/2 SPP-800345 SPP-800347 SPP-800362 SPP-800501 SPP-800502 SPP-800504 SPP-800505

SPP-804106 SPP-804104 SPP-804104/3 SPP-804105 SPP-804105/3 SPP-800110 SPP-800111 SPP-800112 SPP-800365 SPP-800365/2

Ordering

Information

Trang 7

Fixed Optical Attenuator (10dB) for 1550nm testing Variable Optical Attenuator (0-30dB) for 1550nm testing XTD- Cable Guide Cover for 19" Rack (2)

XTD- Cable Guide Cover for 23" Rack (2)

Soneplex AM-VUE

Soneplex AM-VUE (PC Network Manager S/W) Soneplex AM-VUE Plus - 4 Ring License Soneplex AM-VUE Plus - 12 Ring License Soneplex AM-VUE Plus - 20 Ring License Soneplex AM-VUE Plus - 32 Ring License Note: Replace XX in the catalog number with either FD or for floppy disk or CD for compact disk

VUE Communications

4 Port Digiboard Multiport PC Serial Card

8 Port Digiboard Multiport PC Serial Card 19" Rack Mounting Shelf for Terminal Server CS-4 (4 Port RAD LinX Terminal Server) CS-8 (8 Port RAD LinX Terminal Server) CS-16 (16 Port RAD LinX Terminal Server)

220 VAC Power Supply for Terminal Server

Software

NE S/W Release 3.3.27 oc3.mrg (OC-3)

NE S/W Release 3.4, oc3.mrg (OC-3)

NE S/W Release 3.5, oc3.mrg (OC-3)

NE S/W Release 3.44, oc12.mrg (OC-12)

NE S/W Release 3.55, oc12.mrg (OC-12)

SPP-800780 SPP-800781 SPP-800113 SPP-800114

SPP-804602XX SPP-804620/4XX SPP-804620/12XX SPP-804620/20XX SPP-804620/32XX

SPP-800811 SPP-800812 SPP-800820 SPP-800821 SPP-800822 SPP-800823 SPP-800824

SPP-800653 SPP-800654 SPP-800656 SPP-800655 SPP-800657

Ordering

Information

* Custom cables available Call Systems Engineering for more information.

Trang 8

465 2/98 Original © 1998 ADC Telecommunications, Inc All Rights Reserved An Equal Opportunity Employer

Specifications published here are current as of the date of publication of this document Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice At any time, you may verify product specifications by contacting our headquarters office in Minneapolis ADC Telecommunications, Inc views its patent portfolio as an important corporate asset and vigorously enforces its patents Products or features contained herein may be covered by one or more U.S or foreign patents.

From North America, Call Toll Free: 1-800-366-3891, Ext 3223

Outside of North America: 612-938-8080

Home Page Address: http://www.adc.com

International Sales Offices: Belgium 32-2-712-6500 • United Kingdom 44-734-441955

• Montreal, Quebec (514) 677-9166 • Vancouver, BC (604) 270-1675 • Toronto, Ont.

(905) 629-3104 • Ottawa, Ont (613) 723-2171 • Singapore 65-225-8228 •Venezuela

58-2-286-1444 • Mexico City, Mexico 525-658-4519 • Buenos Aires, Argentina (541)

449-2669 • Sao Paulo, Brasil 55-11-3040-0666 • Sydney, Australia 61-2-9975-1499 •

Melbourne, Australia 61-3-9585-3931 • Beijing, China 86-10-6500-7001 • Dusseldorf,

Germany 49-211-530-6550 • Seoul, Korea 82-2-333-8989

Ngày đăng: 10/12/2013, 16:15

w