UltraKey Touch HJC4000 Installation and User Guide

Using the UltraKey Touch ControllerFigure 2-1 UltraKey Touch Controller Keyboard Layout Table 2-1 UltraKey Touch Controller Keys and Controls No.. Using the UltraKey Touch ControllerFig

Trang 1

Installation and User Guide

UltraKey Touch

DVR and PTZ Keyboard Controller

HJC4000

Trang 3

Installation and User Guide

Trang 4

Issue Date Revisions

B 08/10 Document revised for preproduction release

C 02/11 Document updated for latest software changes Changes include additions to the PTZ

keyboard operations section for Diamond and Intellibus protocols This is the production release version of this document

Trang 5

UltraKey Touch Installation and User Guide

Contents

About this Document 11

Overview of the Contents 11

Explanation of Symbols 11

Cautions and Warnings 12

FCC Compliance Statement 13

Manufacturer’s Declaration of Conformance 13

North America 13

Europe 14

Important Safety Instructions 14

Warranty and Service 15

Finding More Information 15

Typographical Conventions 15

1 UltraKey Touch Overview 17

Shipping Checklist 17

UltraKey Touch Port Connections and Descriptions 18

DC Power Port 18

Ethernet Port 18

RS232, RS485 Serial Port 19

RJ45 Box 19

UltraKey Touch Specifications 20

2 Using the UltraKey Touch Controller 21

Logging Onto the Controller 21

Using the UltraKey Touch to Navigate the LCD Menus 21

3 Connecting UltraKey Touch to a DVR 25

Navigating the LCD Configuration Menus 26

Connect to the UltraKey Touch Using the Serial Port (RS232) 27

Step 1: Connect to the UltraKey Touch Using the Serial Port 27

Step 2: Configure the UltraKey Touch for DVR Use 28

Step 3: Configure the UltraKey Touch Serial Port Settings 29

Connect to the UltraKey Touch Using the Serial Port (RS485) 30

Step 1: Connect to the UltraKey Touch Using the Serial Port 30

Step 3: Configure the UltraKey Touch for Serial Port Settings 33

Installing and Configuring an Ethernet Connection 35

Step 1: Connect to the UltraKey Touch Using the Ethernet Port 35

Trang 6

Step 2: Standalone Configuration for DVR Settings 40

Step 3A: Configure the Controller for a Serial Port Connection 41

Step 3B: Configure the Controller IP for an Ethernet Connection 42

Controlling a FUSION DVR 43

Step 1: Connection 43

Step 2: Select DVR Type 43

Step 3: DVR and Camera Connection 44

Operating a Fusion DVR 44

Controlling an HRXD/HRSD DVR 46

Step 2: Keyboard Setup for Connection 46

Operating an HRXD DVR 46

Controlling an HRDP DVR 48

Step 2: Keyboard Setup for Connection 48

Operating an HRDP DVR 48

4 Installing UltraKey Touch with PTZ 51

Navigating LCD Configuration Menus 51

Installing and Configuring a Serial Connection 52

Step 1: Connect to the UltraKey Touch Serial Port 52

Step 2: Configure the Controller for PTZ 54

Step 3: Configure Serial Port of the Controller 54

Configuring UltraKey Touch Using the Web Browser (Optional) 56

Logging into the Web Browser 56

Step 1: Configure UltraKey Touch to System Configurations 56

Step 2: Standalone Configuration for PTZ Settings 57

Step 3: Configure the Controller for a Serial Port Connection 58

Controlling PTZs 59

Step 1: Keyboard Setup 59

Step 2: Camera Selection 60

Operating a PTZ Camera 60

5 System Administration and Troubleshooting 65

System Administration Using the Controller LCD 65

Logging in and Navigating to the System Configuration Menu 65

Setting the Screen Language 65

Restore Default 66

Updating the Touch Pad Firmware 66

Viewing the Firmware Version 66

Testing the Hardware 66

System Administration Using the Web Browser 67

Logging into the Web Browser 67

Upgrading the UltraKey Touch Firmware 67

Rebooting UltraKey Touch 68

Changing the UltraKey Touch Password 68

Appendix A DVR Operation Commands 71

Fusion Operation Commands 71

HRXD/HRSD Operation Commands 72

HRDP Operation Commands 73

System Configuration Menu Tree 75

Trang 7

Figures

Figure 1-1 UltraKey Touch Port Connections 18

Figure 1-2 RJ45 Box Front and Back Ports 19

Figure 2-1 UltraKey Touch Controller Keyboard Layout 22

Figure 2-2 UltraKey Touch Navigation Controls 24

Figure 3-1 LCD and LCD Navigation Keys 26

Figure 3-2 DVR Configuration Menu Tree 26

Figure 3-3 Connecting the Controller for DVR Control 28

Figure 3-4 Connecting the Controller for DVR Control Using RS485 32

Figure 3-5 Ethernet Port Connections to DVR 36

Figure 3-6 UltraKey Touch Login Page 39

Figure 3-7 System Configuration Tab 40

Figure 3-8 Standalone Configuration for DVR Tab 41

Figure 3-9 Serial Port Configuration Tab 42

Figure 3-10 IP Configuration Tab 43

Figure 4-1 PTZ Configuration Menu Tree 52

Figure 4-2 RS485 Serial Port Connection PTZ by RJ45 Box 53

Figure 4-3 UltraKey Touch Login page 56

Figure 4-4 System Configuration Tab 57

Figure 4-5 Standalone Configuration for PTZ Tab 58

Figure 4-6 Serial Port Configuration Tab 59

Figure 5-1 Software Upgrade Warning Message 68

Figure 5-2 Change Password Page 69

Figure A-1 System Configuration LCD Menu Tree - All Modes 75

Trang 8

Figures

Trang 9

Tables

Table 1-1 Shipping Checklist 17

Table 1-2 UltraKey Touch Specifications 20

Table 2-1 UltraKey Touch Controller Keys and Controls 22

Table 2-2 LCD Menu Navigation During Setup 24

Table 3-1 Serial Port Com2 (RS232) Pin Assignments 27

Table 3-2 Serial Port Com2 (RS232) Configurations 29

Table 3-3 Serial Port Com1 (RS485) Pin Assignments 30

Table 3-4 RJ45 Box Pin Assignments 31

Table 3-5 Serial Port Com1 (RS485) Configurations 34

Table 3-6 RJ45 Ethernet Pin Assignments 35

Table 3-7 DVR Control CAM 44

Table 3-8 Operating a Fusion DVR 44

Table 3-9 Operating an HRXD DVR 46

Table 3-10 Operating an HRDP DVR 48

Table 3-11 Joystick Controls 50

Table 4-1 Serial Port COM1 Pin Assignments 52

Table 4-2 RJ45 Box Pin Assignments 53

Table 4-3 Operations for a PTZ Camera 60

Table A-1 Fusion DVR Operations 71

Table A-2 HRXD/HRSD Operations 72

Table A-3 HRDP Operations 73

Trang 10

Tables

Trang 11

About this Document

In this section:

• Overview of the Contents, page 11

• Explanation of Symbols, page 11

• Cautions and Warnings, page 12

• Important Safety Instructions, page 14

• Warranty and Service, page 15

• Finding More Information, page 15

• Typographical Conventions, page 15

Overview of the Contents

This document contains the following chapters and appendixes:

• Chapter 1, UltraKey Touch Overview, introduces the UltraKey Touch controller

• Chapter 2, Using the UltraKey Touch Controller, provides procedures for logging on with the Ultrakey Touch controller and using it to navigate the LCD menus

• Chapter 3, Connecting UltraKey Touch to a DVR, explains connecting the controller

to a DVR and using the controller to perform basic DVR configuration

• Chapter 4, Installing UltraKey Touch with PTZ, describes connecting the controller to

a PTZ camera and using the controller to perform basic PTZ camera configuration

• Chapter 5, System Administration and Troubleshooting, covers system administration using the controller LCD or the web browser

• Appendix A, DVR Operation Commands, lists UltraKey Touch DVR operation commands and provides a menu tree for the controller’s LCD menus

Explanation of Symbols

WARNING! The exclamation point in a red octagon is a WARNING Failure

Trang 12

Caution The lightning flash with arrowhead symbol within an equilateral

triangle alerts the user to the presence of uninsulated dangerous

voltage within the enclosure of the product that may be of sufficient magnitude to constitute a risk of electric shock to the person.

Caution The exclamation point in a yellow equilateral triangle is a Caution

Failure to take or avoid a specified action could result in loss of data

or damage to equipment and may contain important operating and

maintenance servicing information

Cautions and Warnings

Installation and servicing should be performed only by qualified and experienced technicians to conform to all local codes and to maintain your warranty

WARNING! 12 VDC/24 VAC models require the use of CSA Certified/UL

Listed Class 2 power adapters to ensure compliance with electrical safety standards.

WEEE (Waste Electrical and Electronic Equipment) Correct disposal

of this product (applicable in the European Union and other European countries with separate collection systems) This product should be disposed of, at the end of its useful life, as per applicable local laws, regulations, and procedures

Trang 13

FCC Compliance Statement

Information to the User: This equipment has been tested and found to comply with the

limits for a Class B digital device Pursuant to Part 15 of the FCC Rules, these limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or a radio/TV technician for help

Caution Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment

Caution Users of the product are responsible for checking and complying

with all federal, state, and local laws and statutes concerning the monitoring and recording of video and audio signals Honeywell shall not be held responsible for the use of this product in violation of current laws and statutes

This Class B digital apparatus complies with Canadian ICES-003

Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada

Manufacturer’s Declaration of Conformance

North America

Trang 14

The manufacturer declares that the equipment supplied with this guide is compliant with the essential protection requirements of the EMC directive 2004/108/EC and the Low Voltage Directive LVD 2006/95/EC, conforming to the requirements of standards EN

55022 for emissions, EN 50130-4 for immunity, and EN 60950 for Electrical Equipment safety

Important Safety Instructions

BEFORE OPERATING OR INSTALLING THE UNIT, READ AND FOLLOW ALL INSTRUCTIONS.

AFTER INSTALLATION, retain the safety and operating instructions for future reference.

1 HEED WARNINGS - Adhere to all warnings on the unit and in the operating

instructions

2 INSTALLATION

• Install in accordance with the manufacturer’s instructions

• Installation and servicing should be performed only by qualified and experienced technicians to conform to all local codes and to maintain your warranty

• Do not install the unit in an extremely hot or humid location, or in a place subject to dust or mechanical vibration The unit is not designed to be waterproof Exposure to rain or water may damage the unit

3 POWER SOURCES - This product should be operated only from the type of power

source indicated on the marking label If you are not sure of the type of power supplied to your facility, consult your product dealer or local power company

4 HEAT - Situate the unit away from items that produce heat or are heat sources, such

as radiators, heat registers, stoves, or other products (including amplifiers)

5 WATER AND MOISTURE - Do not use this unit near water or in an unprotected

outdoor installation, or any area classified as a wet location

6 ATTACHMENTS - Do not use attachments not recommended by the product

manufacturer as they may result in the risk of fire, electric shock, or injury to persons

7 ACCESSORIES - Only use accessories specified by the manufacturer.

8 CLEANING - Do not use liquid cleaners or aerosol cleaners Use a damp cloth for

cleaning

9 SERVICING - Do not attempt to service this unit yourself as opening or removing

covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel

10 REPLACEMENT PARTS - When replacement parts are required, be sure the

service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire, electric shock or other hazards

Trang 15

Warranty and Service

Subject to the terms and conditions listed on the Product warranty, during the warranty period Honeywell will repair or replace, at its sole option, free of charge, any defective products returned prepaid

In the event you have a problem with any Honeywell product, please call Customer

Service at 1.800.796.CCTV for assistance or to request a Return Merchandise Authorization (RMA) number.

Be sure to have the model number, serial number, and the nature of the problem available for the technical service representative

Prior authorization must be obtained for all returns, exchanges, or credits Items shipped

to Honeywell without a clearly identified Return Merchandise Authorization (RMA) number may be refused.

Finding More Information

Refer to the online literature library to access other electronic documents in PDF format including data sheets, quick references, installation and user guides, specifications,

software and product notices: http://www.honeywellvideo.com Also see the back cover

for international web sites and contact details

Typographical Conventions

This document uses the following typographical conventions:

Use of an arrow

between items (>)

Use of an arrow between keys or tabs indicates holding the first key and then pressing the second key, and then releasing the two keys

On the controller, press Alt > Clr to enter the System Configuration: Standalone Setting menu

Lucida Values of editable fields that are mentioned in the

body text of the document for reference purposes, but do not need to be entered as part of a procedure

The Time from field can be set to

Trang 16

Swiss721 BT Bold Words or characters that you must type The word

“enter” is used if you must type text and then press the Enter or Return key

Enter the password.

Menu titles and other items you select Double-click Open from the File menu.

Buttons you click to perform actions

Pressing a key on the keyboard

Click Exit to close the program.

Press and hold Login.

Italic Placeholders: words that vary depending on the

Trang 17

UltraKey Touch Overview

The UltraKey Touch keyboard controller (HJC4000) is a replacement for the Honeywell HJZTP controller and is compatible with Honeywell DVRs and PTZs

The UltraKey Touch can control the following types of DVRs and PTZs, depending on the type of connection used:

Table 1-1 Shipping Checklist

Quantity Part Use for

1 UltraKey Touch keyboard controller All installations

1 UltraKey Touch installation and user

• CEE 7/16 (Europlug 2.5 A/250V unearthed)

• NEMA 1-15 (North American 15 A/125V ungrounded)

• BS1363 (British 13 A/230-240V 50 Hz earthed and fused)

• CPCS-CCC (Chinese 10 A/250V)/AS 3112; Australian

10 A/240V)

Trang 18

UltraKey Touch Overview

UltraKey Touch Port Connections and Descriptions

Figure 1-1 UltraKey Touch Port Connections

Table 1-1 Shipping Checklist (cont’d)

Quantity Part Use for

Power RJ45 Ethernet RS232 and RS485 Serial Port

81

Pins are numbered from left to right

81

Trang 19

RS232, RS485 Serial Port

Note These ports are used to connect to DVR RS232/485 or PTZ RS485 ports

An isolated surge protector is suggested when using RS485 and when cabling between buildings

RJ45 Box

Use the terminal box RJ45 port and 8-pin terminal plug as required for compatibility and connectivity options It can be used to break out the RJ45 cable when wiring to existing infrastructure is required

Figure 1-2 RJ45 Box Front and Back Ports

Trang 20

UltraKey Touch Overview

UltraKey Touch Specifications

Table 1-2 UltraKey Touch Specifications

408 mm (L) × 215 mm (W) × 105 mm (H)Gross Weight: 7.05 lb (3.2 kg)

Cover material: ABS + PC (cool gray)Environment Operating Temperature: 14°F to 131°F (–10°C to +55°C)

Storage Temperature: –40°F to +167°F (–40°C to +75°C)Humidity: 0 to 95% RH (non-condensing)

Trang 21

Using the UltraKey Touch Controller

You may need to learn how to use the UltraKey Touch both before and after you begin configuring This section covers:

• Logging Onto the Controller on page 21

• Using the UltraKey Touch to Navigate the LCD Menus on page 21

Logging Onto the Controller

1 Connect the keyboard with a power adapter (12V [±10%] DC/1 A included)

2 Press Login on the keyboard

3 Enter the password, 1234.

4 Press Alt>Clr to configure the main menu settings

Note If an invalid password is entered, a message displays and the controller

buzzes Repeat the steps to log in

Using the UltraKey Touch to Navigate the LCD Menus

There are a variety of ways to navigate the LCD menus during configuration as well as normal operation See Figure 2-2 for a brief overview of the three main navigation options See Table 2-2 for specific methods of navigating the LCD during installation and set up

Trang 22

Using the UltraKey Touch Controller

Figure 2-1 UltraKey Touch Controller Keyboard Layout

Table 2-1 UltraKey Touch Controller Keys and Controls

No Icon Description No Icon Description

Trang 23

Operations with the touch pad are described

in these instructions as

“Slider_Direction”

key and Right key

Table 2-1 UltraKey Touch Controller Keys and Controls (cont’d)

No Icon Description No Icon Description

Trang 24

Using the UltraKey Touch Controller

Figure 2-2 UltraKey Touch Navigation Controls

Touch pad slider (used like a laptop mouse pad)

Right arrow key Left arrow key

Backward or reverse key (or down)

Forward key (or up)

Center key is not used for controlling

Right arrow key Left arrow key

Up arrow key Down arrow key

Touch Pad and Ring

LCD Keys

Joystick

Move the joystick left and right or

up and down to navigate the menus

Touch pad ring

You can use any of these methods to change or enter the current menu:

• KEYS: Press Ent

• TOUCH PAD RING: Press the right arrow key

• JOYSTICK: Move right

To cancel an operation or return to

the previous level of the menu

You can use any of these methods to cancel or return to the previous menu:

• KEYS: Press Alt > Clr

• TOUCH PAD RING: Press the left arrow key

• JOYSTICK: Move left

To view or switch between the

menu items of the same level

You can use any of these methods to switch between menu items:

• LCD KEYS: Press up / down arrow keys

• TOUCH PAD SLIDER: Rotate your finger clockwise or counterclockwise

• TOUCH PAD RING: Press the forward / backward arrows

• JOYSTICK: Move up / down

To move back through the menus

one level at a time

• KEYS: Press Alt > Clr

Trang 25

Connecting UltraKey Touch to a DVR

This section covers:

• Navigating the LCD Configuration Menus on page 26

• Connect to the UltraKey Touch Using the Serial Port (RS232) on page 27

• Connect to the UltraKey Touch Using the Serial Port (RS485) on page 30

• Installing and Configuring an Ethernet Connection on page 35

• Keyboard Configuration for Cascade Linkage (Additional) on page 37

• Configuring UltraKey Touch Using the Web Browser (Optional) on page 39

• Controlling a FUSION DVR on page 43

• To confirm a modification or enter the current menu item you can press: Ent, Slider_Right (on the touch pad), or move the joystick to the right.

• To cancel an operation or return to the previous level of the menu you can press:

Slider_Left (on the touch pad), Alt > Clr, or move the joystick to the left.

• To view or switch between the menu items of the same level you can press: Slider

Up /Down, the LCD up/down arrow keys, rotate the slider, or move the joystick

up/down

Trang 26

Connecting UltraKey Touch to a DVR

Navigating the LCD Configuration Menus

Figure 3-1 LCD and LCD Navigation Keys

Figure 3-2 DVR Configuration Menu Tree

Right arrow key Left arrow

key

Up arrow key Down arrow key Numeric keypad

and Ent key

System Configuration

Data Bit

Network Serial Port

Standalone Settings

DVR / CAM PORT SELECT

HRDP / FUSION

/ HRXD

DVR PTZ

Baud Rate Parity Stop Bit

IP Address

COM2 (RS232) Show Net Infor Manual Settings DHCP

Serial Settings DVR Selection

RS232/RS485

Gateway

NetMask DNS Basic Set

Trang 27

Connect to the UltraKey Touch Using the Serial Port (RS232)

Step 1: Connect to the UltraKey Touch Using the Serial Port

Note For a list of cable accessories, see the Shipping Checklist on page 17 and for

port connections see UltraKey Touch Port Connections and Descriptions on page 18

1 Select the applicable adapter plug and insert it into the AC adapter Push to click it into place

2 Plug the AC adapter into the controller power port and the adapter into a power source

3 Connect the RJ45 network cable to the controller serial port and the connector adapter

4 Connect the serial port of the connector adapter to the serial port of the DVR:

• For backwards compatibility with DVRs, a DB9 male adapter is required and included with your shipment (see Figure 3-3)

• For other DVRs, the installation is a direct connection with the RJ45 network cable, also included with your shipment

Note To setup cascade linkage for UltraKey Touch, see Keyboard Configuration for

Cascade Linkage (Additional) on page 37

Table 3-1 Serial Port Com2 (RS232) Pin Assignments

Serial Port Type Pin Signal

Trang 28

Figure 3-3 Connecting the Controller for DVR Control

Step 2: Configure the UltraKey Touch for DVR Use

Note Set the DVR type in the Ultrakey Touch configuration to be the same as the

connected DVR type If any other type has been selected, then use the following procedure to select a different DVR type

1 Install and connect the controller to a power source, if it is not already connected

2 Press Login, and then enter the password, 1234.

3 From the home screen, press Alt > Clr to enter the System Configuration menu Scroll the slider or rotate the joystick until System Configuration: Standalone Settings displays.

4 Press Ent and rotate the slider to select DVR

Serial Port (RS232)

Network cable

RJ45 to DB9F for RS232

UltraKey Touch

Network Port Network Port

NETWORK

Network cable

ST User2

Standalone Settings

Standalone Set:

Trang 29

5 Press Ent to enter the DVR Selection menu Press the Slider_Up/Down to select the DVR to control.

6 Press Ent to enter the Basic Set menu Press the Slider_Up/Down until the PORT SELECT submenu

displays

7 Press Ent to enter the Port Select menu, then select the RS232 protocol to control a DVR Press Ent or Slider_Right to confirm.

8 Return to the home screen

If the keyboard is in PTZ mode after changing to DVR settings, then the home screen displays this message:

Select Yes or No to change the work mode of the

keyboard

If the keyboard is in DVR mode after changing to DVR settings, then the home screen does not display that message

Step 3: Configure the UltraKey Touch Serial Port Settings

1 Press Alt > Clr to exit from the DVR configuration menu.

2 Before using the UltraKey Touch keyboard to control Fusion/HRXD/HRDP DVRs, it

must be setup to meet the requirements Set Com2 (RS232) according to Table 3-2

3 Press Alt > Clr a second time to enter the System Configuration menu.

4 Rotate the slider to scroll through the options (standalone settings, serial port, network, language, slider update, cascade linkage, hardware test, about, and restore

Trang 30

6 Press the Slider_Up/Down or LCD up/down arrow keys to select Com2 (RS232) Press Ent or Slider_Right to confirm, and Slider_Left to return.

7 The Serial Setting menu displays Here you can set the Com2 (RS232) settings for

parity, baud rate, data bit and stop bit:

a Press the Slider_Right to select Parity Press Ent and use the Slider_Up/Down or the LCD up/down arrow keys to select None Press Ent to save.

b Press the Slider_Down or the LCD up/down arrow keys to select Baud Rate Press Ent and use the up/down arrow keys to select 1200, 1800, 2400,

4800, 9600, 19200, 38400, or 57600 Press Ent to

save

c Press the Slider_Up/down or the LCD up/down arrow keys to select Data Bit Press Ent and use the Slider_Up/Down to select 7 bit or 8 bit Press Ent to save.

d Press the down arrow key to select Stop Bit

Press Ent and use the Slider_Up/Down or the LCD up/down arrow keys to select 1 bit or 2 bit

Press Ent to save.

8 Press Slider_Left to return to the main menu

Connect to the UltraKey Touch Using the Serial Port (RS485)

Step 1: Connect to the UltraKey Touch Using the Serial Port

Note For a list of cable accessories, see the Shipping Checklist on page 17, and for

port connections, see UltraKey Touch Port Connections and Descriptions on page 18

Table 3-3 Serial Port Com1 (RS485) Pin Assignments

Serial Port Type Pin Signal

Trang 31

3 Connect the RJ45 network cable to the serial port of the controller and the RJ45 box

4 Connect the pins (RS485+, RS485–) of the RJ45 box to the pins (T/R+, T/R–) of the RS232-RS485 converter using appropriate wire See Table 3-4 for the RJ45 box pin assignments

5 Connect the RS232-RS485 converter’s serial port to the DVR’s serial port:

• For backwards compatibility with DVRs, an RS232-RS485 converter is required (see Figure 3-4)

• To use the controller’s RS485 serial port, an RJ45 box is required

Note To setup cascade linkage for UltraKey Touch, see Keyboard Configuration for

Table 3-4 RJ45 Box Pin Assignments

Trang 32

Figure 3-4 Connecting the Controller for DVR Control Using RS485

Note Set the DVR type in the Ultrakey Touch configuration to be the same as the

connected DVR type If any other type has been selected, then use the following procedure to select a different DVR type

1 Install and connect the controller to a power source, if it is not already connected

Serial Port (RS232)

Serial Port (RS485)

Network Cable Serial Port (RS485)

UltraKey Touch

RS232-RS485 Converter

RJ45 Box

Master Slave1

Network Cable

Network Cable Network Port Network Port

NETWORK

5 4

3 2 1

6 7 8

Trang 33

2 Press Login, and enter the password, 1234

3 From the home screen, press Alt > Clr to enter the System Configuration menu Scroll the slider or rotate the joystick until System Configuration: Standalone Settings displays.

4 Press Ent or rotate the slider to select DVR type

5 Press Ent to enter the DVR Selection menu Press the Slider_Up / Down to select the DVR to control.

6 Press Ent to enter the Basic Set menu Press the Slider_Up/Down until the Port Select submenu

displays

7 Press Ent to enter the Port Select menu, then select the RS485 protocol to controll the DVR, then press Ent

or Slider_Right to confirm.

8 Return to the home screen

If the keyboard is in PTZ mode after changing to DVR settings, then the home screen displays this message:

Select Yes or No to change the work mode of the

keyboard

If the keyboard is in DVR mode after changing to DVR settings, then the home screen does not display that message

Step 3: Configure the UltraKey Touch for Serial Port Settings

1 Press Alt > Clr to exit from the DVR configuration menu.

2 Before using the UltraKey Touch keyboard to control Fusion/HRXD/HRSD/HRDP DVRs, it must be setup to meet the requirements Set Com1 (RS485) according to

Trang 34

3 Press Alt > Clr a second time to enter the System Configuration menu.

4 Rotate the slider to scroll through the options (standalone settings, serial port, network, language, slider update, cascade linkage, hardware test, about, and restore default)

5 When you are at the System Configuration: Serial Port menu, press Ent to enter.

6 Press the Slider_Up/Down or LCD up/down arrow keys to select Com1 (RS485) Press Ent or Slider_Right to confirm, and Slider_Left to return.

7 The Serial Setting menu displays Here you can set the Com1 (RS485) settings for

parity, baud rate, data bit and stop bit:

a Press the Slider_Right to select Parity Press Ent and use the Slider_Up/Down or the LCD up/down arrow keys to select none Press Ent to save.

b Press the Slider_Down or the LCD up/down arrow keys to select Baud Rate Press Ent and use the up/down arrow keys to select 1200, 1800, 2400,

4800, 9600, 19200, 38400, or 57600 Press Ent to

save

c Press the Slider_Up/Down or the LCD up/down arrow keys to select Data Bit Press Ent and use the Slider_Up/Down or the LCD up/down arrow keys to select 7 bit or 8 bit Press Ent to save.

d Press the down arrow key to select Stop Bit

Press Ent and use the Slider_Up/Down or the LCD up/down arrow keys to select 1 bit or 2 bit

Press Ent to save.

8 Press Slider_Left to return to the main menu.

Table 3-5 Serial Port Com1 (RS485) Configurations

Trang 35

Installing and Configuring an Ethernet Connection

Note DVR ethernet control is currently unavailable It will be available in future

releases

For a list of cable accessories see the Shipping Checklist on page 17, and for port connections and pin assignments, see UltraKey Touch Port Connections and Descriptions

on page 18 The UltraKey Touch Controller runs TCP/IP keyboard protocol

Step 1: Connect to the UltraKey Touch Using the Ethernet Port

1 Select the applicable adapter plug and insert it into the AC adapter Push to click it into place

3 Plug an RJ45 network cable from the network to the controller Ethernet port (see

Figure 3-5)

4 Connect a DVR to the network Refer to the applicable DVR Installation Guide for instructions

Note To setup cascade linkage for UltraKey Touch, see Keyboard Configuration for

Table 3-6 RJ45 Ethernet Pin Assignments

Trang 36

Figure 3-5 Ethernet Port Connections to DVR

Note If any mode other than DVR has been selected, then use the procedure in

Step 2: Configure the UltraKey Touch for DVR Use on page 28 to select DVR mode Otherwise skip to the next step

Step 3: Configure the UltraKey Touch Ethernet Connection Settings

1 Press Alt > Clr to enter the System Configuration menu.

2 Rotate the slider or press the LCD up/down arrow keys to scroll through the options (standalone settings, serial port, network, language, slider update, cascade linkage, hardware test, about, and restore default)

3 Press Ent when you are at the System Configuration:

Network menu.

Network Port Network Port Network Port

NETWORK

Network Cable

Master Slave 1 Slave 2

Network Port Network Cable

UltraKey Touch

Network

Trang 37

4 Press Slider_Down, the menu displays (one of):

5 Select the Network: Manual Setting menu and press Ent to confirm Press the Slider_Up/Down or the LCD up/down arrow keys to setup the UltraKey Touch

network parameters (IP Address, Gateway, NetMask and DNS):

a Press the Slider_Up/Downor the LCD up/down

arrow keys to scroll through the menu options and select IP Address Press Ent Using the numeric keypad, enter an IP address Press Ent to save.

IPAddr Changed displays on the LCD menu Press the Slider_Up/Down or the LCD up/down arrow keys to select Yes to save or No to cancel Press Ent.

b Press the Slider_Up/Down or the LCD up/down

arrow keysto scroll through the menu options and

select Gateway Press Ent Using the numeric

keypad, enter a Gateway value, as required Press

Ent to save.

GW Changed displays on the LCD menu Press the Slider_Up/Downor the LCD

up/down arrow keys to select Yes to save or No to cancel Press Ent.

c Press the Slider_Up/Downor the LCD up/down arrow keys to scroll through the menu options and

select NetMask Press Ent Using the numeric

keypad, enter a NetMask value, as required Press

Ent to save.

NetMsk Changed displays on the LCD menu Press the Slider_Up/Downor the

LCD up/down arrow keys to select Yes to save or No to cancel Press Ent.

d Press the Slider_Up/Down or the LCD up/down

arrow keys to scroll through the menu options and

select DNS Press Ent Using the numeric keypad, enter a DNS value, as required Press Ent to save.

DNS Changed displays on the LCD menu Press the Slider_Up/Downor the

LCD up/down arrow keys to select Yes to save or No to cancel Press Ent.

6 If other changes are required from this menu (language, slider update, cascade linkage, hardware test, and about) see System Administration and Troubleshooting on page 65 Otherwise the installation and configuration is complete

Keyboard Configuration for Cascade Linkage (Additional)

Trang 38

Note The IP address of the master or slave keyboard is both referred to IP address

in the Network menu

1 Press Alt > Clr and scroll with the slider The Cascade Linkage menu appears.

2 In cascade mode, you can set the keyboard status (such as master or slave), and the cascade IP address if its status is set as “slave”

3 Press the Slider_Right to enter the Cascade Linkage menu

There are two menu items: KBD Mode and IP Address

• In the KBD Mode menu, the keyboard can be set as master or slave;

• In the IP Address menu, when the keyboard is in slave statues, you should set this cascade IP address to match the master’s IP address

4 Press the Slider_Up/Down to scroll to KBD Mode and press Ent

Set the keyboard as master or slave, and press

Slider_Right or Ent to confirm.

5 For a slave keyboard, press the Slider_Left to return to the Cascade Linkage menu Press the

Slider_Up/Down until the IP Address menu displays,

then set this cascade IP address to match the master’s

IP address

6 For a master keyboard, this cascade IP address is

invalid Set the master’s IP address in the Network

menu

7 Press Ent Rotate the slider and use the numeric keypad to enter an IP address, as

required

Note The slave keyboard’s cascade IP address in the Cascade Linkage submenu

must be the same as the master keyboard’s IP address in the Network submenu The master keyboard’s cascade IP address in the Cascade Linkage submenu is invalid

8 Press Entto confirm

Trang 39

Configuring UltraKey Touch Using the Web Browser

(Optional)

Logging into the Web Browser

1 Input, navigate to, or copy and paste, the applicable IP address into your web browser:

• LAN connections: for example, http://192.168.1.9 (default).

• Crossover cable connections - static address: http://192.168.1.9 (default).

2 Enter Administrator (case sensitive) in the User Name field.

3 Enter 1234 (default) in the Password field.

4 Click Login.

Figure 3-6 UltraKey Touch Login Page

Step 1: Configure UltraKey Touch to Standalone Mode

1 Log into the web browser (see Logging into the Web Browser on page 39)

2 From the top menu, click the Configuration tab (see Figure 3-7)

3 From the side menu, click the System Configurations tab.

4 Select Standalone from the System Mode drop-down list.

5 Select English from the System Language drop-down list.

6 Click Apply to save the configuration, Cancel to exit without saving, or Default to

Định dạng
Số trang	78
Dung lượng	909,92 KB