Panduit Copper Structured Cabling Connector Jacks Reterminations 200+ reterminations on all connections.. + - 20 reterminations ADC jacks can be terminated up to 1000 times without sacri
Trang 1COMPETITVE COMP
ADC vs Panduit
Copper Structured Cabling
Connector (Jacks) Reterminations
200+ reterminations on all connections + - 20 reterminations
ADC jacks can be terminated up
to 1000 times without sacrifi cing contact integrity
Contact
Patented 45-degree angle Retains wire
by 3-point unique axial and torsional forces
+ - Simple split beam Retains wire by only one set of axial forces.
Contact design is why ADC is the industry standard in over 80 countries throughout the world
IDC Contact
This allows ADC to be used in humid
or otherwise harsh environments without gel or other modifi cations
Contact Plating Gold (50 microinches) + + Gold (50 microinches)
IDC Contact Oxidation
Does not corrode Silver tarnish is highly conductive + - Will tarnish, which is non-conductive. Additionally, tarnish is soft and will wipe off when wire is inserted.
Connector Wire Gauges Supported
Most ADC sales engineers are registered communications distribution designers (RCDD) as certifi ed by the Building Industry Consulting Service International (BICSI)
Connectors and Stranded Wires
Most stranded wires accepted + - N/A
This allows ADC to terminate shielded cable effectively (Can punch down drain wires)
Contact Memory
Can reliably terminate 26 AWG following
a 22 AWG termination +
-Cannot reterminate a smaller wire down on a previously used termination point (i.e 22 AWG
to 26 AWG)
ADC contact allows greater longevity and fl exibility
Trang 2COMPETITIVE COMP
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site
ADC Telecommunications, Inc., P.O Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice At any time, you may verify product specifications by contacting our headquarters office in Minneapolis ADC Telecommunications, Inc views its patent portfolio as an important corporate asset and vigorously enforces its patents Products orfeatures contained herein may be covered by one or more U.S or foreign patents An Equal Opportunity Employer
102782AE 5/06 Original © 2006 ADC Telecommunications, Inc All Rights Reserved
Double Punching
Two per termination point of same gauge (22 to 26 AWG) + - N/A Allows easy looping of stations for
applications such as Local Talk
Cable Made in-house in ADC factories + - Third-party supplier; switched vendor in 2004
Cable and connectors are designed together for maximum throughput and impedance matching
True End-to-End Solution
Yes; ADC manufactures all of it’s cable and connectivity + - No; Cable sourced from several vendors over past several years.
One source ensures no discrepancy
on potential warranty and performance concerns
Zero Bit-Error Warranty Yes, ADC invented the technology. + - N/A
Critical to ensuring no errors are placed on the network as a result
of the cabling system (the result of cable and connectors being designed together)