The CopperTen module provides a 20 pair high-density, high performance, cost competitive 10G Base-T channel compliant module, to accept ADC KRONE’s CopperTen cable.. Module General Speci
Trang 1Page 1 of 2
a d c k r o n e c o m / a u z
Termination Modules
Issue 3
O r d e r i n g I n f o r m a t i o n
Product Description and Application
Supplied as kit consisting of: a 12 way mounting frame and 12 CopperTen 20 Pair modules with rear
cable management
The CopperTen module provides a 20 pair high-density, high performance, cost competitive 10G Base-T
channel compliant module, to accept ADC KRONE’s CopperTen cable
Module General Specifications and Features
The upper and lower shell are moulded in PBT
The internal shielding is manufactured from tin plated mild steel
Modules are terminated with the standard ADC KRONE termination tools 6089 2 003-00 or
6417 2 055-01, and may also be terminated with a 110 tool
Technical Specifications
Environment for use: Indoors or in dry enclosure rated IP54 or greater
Operating temperature range: -40°C to +80°C
Maximum relative humidity: ≤ 93% non-condensing
Wire range for solid & stranded copper conductors: 0.4-0.65mm (26-22 AWG)*
* A maximum of 2 equal, solid conductors only, of up to 0.5 conductor diameter can be terminated per
slot Only 1 conductor of stranded wires per slot can be terminated If any conductors >0.5 have been
terminated, reversal to smaller conductors in no longer possible
Wire insulation diameter range (PE, PVC): Typically 0.7-1.4mm
Number of wire reterminations: Up to 200
Wire insertion force (0.5 conductor diameter): 6N
Wire pull out force, radial (0.5 conductor diameter): 5N
Wire pull out force, axial (0.5 conductor diameter): 35N
Number of patching cycles, Modules: Up to 750
Patch plugs: Up to 200
Transmission & reliability:……… Meets & exceeds the requirements of TIA/EIA-TSB-155
Draft 1 when used with KRONE CopperTen cable
Change of contact interface resistance after reliability testing < 5mΩ
Typical to ISO/IEC 11801 and TIA/EIA 568B per through connection ie 2 insulation displacement
and 1 disconnection contact joint
Voltage/current rating at 25°C ambient: ≤ 150V AC at 2.5A max
Dielectric strength: ≤ 1.5kV AC
1 8 0 0 8 0 1 2 9 8 z h e l p d e s k a u @ a d c k r o n e c o m
Trang 2Page 2 of 2
6450 1 107-00 Issue 3
Surge voltage strength (1.2/50 µsec wave shape): ≤ 2.5kV Surge current strength (8/20 µsec wave shape): Modules: ≤ 3kA Patch plugs: ≥ 0.5kA Insulation resistance: ≥ 5x10 MΩ at 500 VDC Flammability rating of plastic housing: UL 94 V0