Drawings and Specifications

3/06 • 102117AEPPP1248 Chassis and AMI-BAN Module in all Chassis Configurations ELECTRICAL 0.020 Ohm maximum after life cycling 0.10 Ohm maximum after salt spray 1,000 megohms minimum af

Trang 1

ProPatch™Programmable Series 170

Longframe Audio Products 172

Bantam Audio Products 173

Video Products 175

ICON Systems I-W Wall-Mount System 177

Bulkhead Panels 182

F Connector Bulkhead Panels 188

Wall-Mount Panels 189

Audio Products 191

Connectors and Accessories Component Audio Products 196

MUSA-Series jacks and Accessories 199

Video Products 200

75 Ohm Connectors 206

ProAx™Triaxial Camera Connectors 214

RF Signal Management RF Worx®SignalOn®Passives 218

RF Worx®Satellite Splitters/Combiners 220

RF Worx®SignalOn®Actives 221

Trang 2

3/06 • 102117AE

PPP1248 Chassis and AMI-BAN Module in all Chassis Configurations

ELECTRICAL

0.020 Ohm maximum (after life cycling) 0.10 Ohm maximum (after salt spray)

1,000 megohms minimum (after moisture resistance test)

MECHANICAL

ENVIRONMENTAL

MATERIALS

Unreinforced polyetherimide resin rated UL 94-V0 for flammability

30 micro inches gold on contact

10 micro inches minimum gold on contact

Trang 3

Typical 1RU 32-Position EDAC 120 Rear View

Front View Top View

Trang 4

18.32"

POS 25

POS 1 1.35"

.625" center to center longframe jack spacing

Typical 2 RU 2x26 Longframe Audio Panel Dimensions

This section presents drawings and specifications for typical products For additional information or forinformation about products not presented here, please see the ADC web site at ADC.com or consult ourTechnical Assistance Center

Trang 5

3/06 • 102117AE

Standard Pro Patch Bantam Audio Products

Typical 1 RU 2x48 Regular Spaced Bantam Audio Panel Dimensions

3.47 3.00

19.00 18.31

Front View

Horizontal Designation Windows and Strips

Front View

19.00 18.31

1.25

.75

.25 X 44

Jack spacing 312" inch center to center

Trang 6

3/06 • 102117AE

Standard Pro Patch Bantam Audio Products

3.47 3.00

19.00 18.31

Front View

Horizontal Designation Windows and Strips

Front View

19.00 18.31

1.25

.75

.25 X 44

Jack spacing 312" inch center to center

Trang 7

1.718 " 1.250 "

1 Row

Midsize spacing:

0.520” center to center Standard size spacing:

0.625” center to center

Trang 8

Video Products PPI Series

Jacks Type MVJ-3 and MVJ-3T

Jacks Type CJ3014N and CJ4014N/ CJ3014N-75 and CJ4014N-75

3.47"

3.00"

19.00"

18.31"

Designation Strips height 60", length 8.25" x 2 (16.5" total) for 2 RU video panels

Midsize jack spacing 520" center to center between jacks

Typical 2 RU Series 2x32 Midsize Video Panel Dimensions

CABLE SUPPORT BAR 17.12

8.93

.075

7.2 (ADJUSTABLE FROM 7.2 TO 5.2)

WSI Top View

Typical 1 RU 2x32 Midsize Video Panel Dimensions

Typical 2 RU 2x32 Midsize Video Panel Dimensions

19.00 18.31 625

Typical 2 RU 2x24 Standard Size and MUSA Video Panel Dimensions

19.00 18.31

Jack Port

.625 63

Position of Horizontal Designation Strips and Windows

.25 x 44 Position 1 Position 26

Typical 1 RU 2x26 Standard Size and MUSA Video Panel Dimensions

Trang 9

1.53 minimum

37.5 15.0

16.00 15.00 50

18.75

37.50 38.50

Markings appear on both sides of panel

4.90

8.75 6.75

See detail “A”

Screws are shown for references only (included in kit)

Detail “A”

Scale 2.000 Typical (24) places Panel

Insulator

Nut

Lock washer

BNC to BNC Insulator

BNC and BNC to F Wall-Mount Block

Trang 10

Cable tie buttons

.156 Diameter

Markings appear on both sides of the panel

5.08 1.08

.25 5.40

1.50

8.00

5.90 5.00

See detail “A”

Detail “A”

Lock washer Insulator washer

Panel

“F” Connector Insulator washer

Trang 11

5.40

5.00 6.00

1.36

.25

Screws are shown for references only (included in kit)

RJ Wall-Mount Block

Cable tie buttons 156 Diameter

Markings appear on both sides of panel

4.90

8.75 6.75

5.00 6.00

Female/Female

Screws are shown (included in kit)

DB-9 Wall-Mount Block

Trang 12

6.75 8.75

.150 1.200

Cable tie buttons

3 pin connector

E3 Wall-Mount Block

Trang 13

.156" DIA

75 BNC BULKHEAD FEEDTHRU CONNECTORS (24)

MARKINGS APPEAR ON BOTH SIDES OF PANEL

1.08"

5.08"

.156" DIA

CABLE TIE BUTTONS

Drawings and Specifications

Trang 14

3/06 • 102117AE

ADC offers a wide variety of bulkhead panels

featuring our exclusive impedance matched true

75 Ohm bulkhead connector

Features:

• Rack-mount versions in 19" (48.26 cm) or 23" (58.42 cm) 1 RU or 2 RU heights

• Models from 12 to 48 circuits with or without cable trays

• Wall-mount systems from 8 to 96 circuits

VI-12-W 12-Circuit 2 RU BNC Bulkhead Panel

VI-16-PTY 16-Circuit 2 RU BNC Bulkhead Panel

VI-116-DES-W 16-Circuit 1 RU BNC Bulkhead Panel

CARDS AND WINDOWS

SIDE

Trang 15

19.00"

18.31"

3.00"

3.47"

NOT ATTACHED BY ADC

VI-20-PTY

VI-32-BK VI-24VHR-BK VI-24-PTY

.25" X 44" SLOT POSITION HORIZONTAL DESIGNATION

CARDS AND WINDOWS

CABLE TIE CUTOUT

SEE DETAIL "A"

BNC TO BNC BULKHEAD (24)

DETAIL "A"

SCALE 3.000 TYP (24) PLACES

BNC TO BNC

INSULATOR (REF) NUT (REF)

LOCK WASHER (REF)

Trang 16

.25" X 44" SLOT (TYP) HORIZONTAL DESIGNATION STRIPS FOR

CARDS AND WINDOWS

SEE DETAIL "A"

Trang 17

.25" X 44" SLOT (4) DESIGNATION STRIP

Trang 18

CABLE TIE CUTOUT

REAR VIEW ROTATED

SEE DETAIL "A"

BNC TO BNC BULKHEAD (12)

DETAIL "A"

SCALE 3.000 TYP (12) PLACES

BNC TO BNC INSULATOR (REF)

INSULATOR (REF) NUT (REF)

LOCK WASHER (REF)

CABLE TIE CUTOUT

19" (48.26 cm) Panels with Cable Tray

Trang 22

Video ICON VIW-64/72/96 Wall-Mount Panel Dimensions

Trang 23

9 10 13

16

19 22

ICON

S +

3 6

9 10

13

16 19

22

ICON

S + 3

6

9 10

13

16 19

22

ICON

S + 3

6

9 10

13 16

BLACK WHITE

I-24-MKII

Trang 24

24 21

24 21 17

20 18 16

20 17 16

24 21 18 16

1

8

14 11 9

14 11 9 8 6 3

7 4 1

8

13 10 9 7 5 2 22

S 24 21 18 16

18

21 17 16

S 24 22 18

21 19 16

2

12

15 13 10 9

12

15 13 10 9 6 8 5 3

8 5

15 12 9 8 5 2 23

2 24

S 1 24 23 20 17

22 20 17

23

1 24 22 19

16 13 10 9 8 5

7

9 8 5

13

16 12 9 8 5 3 S

3

21

24 20

24 22 19

S

2 24 22 19

11 11

17 16 13

16 13 10 9 8 5

10 9 8 5

16 14 11 8

10 9 7 1

4 2 1

4 S

4 1

3.94"

3.50"

ICON I-WA-MKIV Wall Mount Audio Frame Dimensions

24 22 20 18 16 14 12 10 9 8 6 4 2

24 22 20 18

16 14 12 10 9

S S

8 6 4 2

Trang 25

PAT NO.

Ground Lug

External Tooth Lock Washer 12" Commoning Bar Between Panels

23.5" Ground Bar Between Modules

I-WA Mounting Details

7.50"

.250" DIA (2) 20" DIA (2)

ICON I-WFP Fanning Panel Dimensions

Trang 26

4 6

4 3 A

-+ A

.250" DIA (2)

(2) 6.26"

7.00"

(2)

.25"

(2) 16.90"

17.90"

(2) 50"

4.72"

ICON I-WSET Express Trough Dimensions

Trang 27

ICON I-WS-MKIV Wall-Mount Audio Frame Dimensions

Trang 28

MECHANICAL

ENVIRONMENTAL

MATERIALS

Single Longframe Audio Jack

1.687 1.375

.156 625

Trang 29

Dielectric Withstanding:

MECHANICAL

ENVIRONMENTAL

MATERIALS

Three-Conductor Single Bantam Jack

Trang 30

3/06 • 102117AE

PC BOARD DRILL GUIDE

AS SEEN FROM COMPONENT SIDE OF BOARD

S

0.078" ± 005" (3) (RECOMMENDED HOLE)

PC BOARD DRILL GUIDE

AS SEEN FROM COMPONENT SIDE OF BOARD

S

.078" ± 005" (5) (RECOMMENDED HOLE)

S RB TB REFERENCE SCHEMATIC

R T S

AJ238/AJ339

Component Audio Products

Trang 31

3/06 • 102117AE

SMJ Series MUSA Single Coaxial Jacks to BNC Specifications

The SMJ family is rated to handle analog and digital video data rates up to and including HD 1.485 Gbps.

ENVIRONMENTAL

(zinc chromate plated)

20.955 mm 825"

15.621 mm 615"

9.525 mm 375"

81.102 mm 3.193"

10.439 mm 411"

41.910 mm 1.650"

34.874 mm 1.373"

15.875 mm 625"

MUSA-Series Jacks and Accessories

Trang 32

CJ2014N and CJ2020N-75 (terminated) Standard Size Coaxial Video Jack Specifications

ENVIRONMENTAL

MATERIAL

or electro-deposited gold plating per MIL-G-45204

Center Conductors

per MIL-G-45204 on contact areas only

per MIL-G-45204 or electro-deposited nickel plating per QQ-N-290

Trang 33

3/06 • 102117AE

SJ2000 Switching Coaxial Jack Specifications

The SJ2000 family is rated to handle analog and digital video data rates up to 360 Mbps

ELECTRICAL

(.23 cm) diameter center conductor

MECHANICAL

ENVIRONMENTAL

MATERIAL

Outer Shell, Jack Bodies

electro-deposited nickel plating per QQ-N-290

gold plating per MIL-G45204 on contact areas only

Trang 34

SJ2000 WECO BNC to BNC Coaxial Video Jack

REFERENCE SCHEMATIC

IN

OUT

L1 L1

BNC BNC

.456"

.450"

ø 330" TO ø 320 Taper, 331" Deep (2)

Trang 35

SVJ-2x Standard Size Video Super Jack Specifications

The SVJ-2x family is rated to handle digital video data rates up to and including

uncompressed HDTV SMPTE 292M 1.485 Gbps.

ELECTRICAL

MECHANICAL

MATERIAL

Front and Rear

REF 3.370

REF 600

1.174 "

1.375 "

REF 305

REF 625

SCHEMATIC OF 75 TERMINATED SVJ-2 JACK R1 = 75 1/4W RESISTOR

BNC

STANDARD COAX PATCH PORTS

SCHEMATIC OF NON-TERMINATED SVJ-2 JACK

SVJ-2x Standard Size Video Super Jack

Video Products

Trang 36

3/06 • 102117AE

CJ Series Midsize Single Coaxial Jacks to BNC Specifications

The SJ2000 family is rated to handle analog and digital video data rates up to and including 360 Mbps.

ENVIRONMENTAL

(zinc chromate plated)

Trang 37

Center Conductor

MECHANICAL

MATERIAL

Front and Rear

ENVIRONMENTAL

LOCATION OF ADC CATALOG NUMBER 375"

BNCS

SCHEMATIC OF 75 TERMINATED MVJ-3 JACK

MIDSIZE COAX PATCH

Trang 38

200 megohms minimum change

500 cycles minimum

6 lbs minimum

100 lbs minimum Dependent on cable size

500 cycles minimum Torque 2.5 in/lb maximum; longitudinal force 3 lbs maximum MIL-C-39012 except 75 Ohm

-40°C to 65°C operating; -55°C to 85°C, non-operating 0% to 95%; MIL-STD-202 Method 106

MIL-STD-202 Method 101, Test Condition B

UL 94-VO rated (center conductor insulator) MIL-STD-202 Method 201

MIL-STD-202 Method 215 Tarnish-resistant electroless nickel plating

50 millionths inch gold plating MIL-G-45204 Type 1, Grade C, Class 1; requires 042" crimp station die

Cable Pulloff Force:

Cable Bend and Twist:

Trang 39

500 cycles minimum

100 lbs minimum

MIL-STD-202 Method 215

Tarnish-resistant electroless nickel plating

Right Angle BNC Connectors

Trang 40

500 cycles minimum

6 lbs minimum

100 lbs minimum

UL 94-VO rated (center conductor insulator) MIL-STD-202 Method 204, Test Condition B MIL-STD-202 Method 215

50 millionths inch gold plating MIL-G-45204 Type 1, Grade C, Class 1

Bulkhead Jack Connectors

.585"

.263"

RECOMMENDED PANEL CUTOUT WITHOUT INSULATING WASHER (MAX THICKNESS: 240)

RECOMMENDED PANEL CUTOUT WITH INSULATING WASHER (MAX THICKNESS: 240)

BNC-BHJ-x

75 Ohm BNC Connectors

Trang 41

500 cycles minimum

6 lbs minimum

100 lbs minimum

50 millionths inch gold plating MIL-G-45204 Type 1,Grade C, Class 1

3.75 93.6 184 273 363 453 543 633 723 813 903 993

1082 1172 1262 1352 1442 1532 1622 1712 1801 1891 1981 2071 2161 2251 2341 2431 2521 2610 2700 2790 2880 2970

BNC Right Angle Adapter

Trang 42

500 cycles minimum

6 lbs minimum

100 lbs minimum

50 millionths inch gold plating MIL-G-45204 Type 1,Grade C, Class 1

Insulators Hardware

Recommended Panel cutout with Isolation Washer (Max Panel Thickness: 250)

Trang 43

500 cycles minimum

100 lbs minimum MIL-STD-202, Method 213 MIL-C-39012 except 75 Ohm

-40°C to 65°C -55°C to 85°C, non-operating;

0% to 95% relative humidity, tested to MIL-STD-202 Method 106 MIL-STD-202 Method 101, Test Condition B

Tarnish resistant electroless nickel plating

50 millionth inch gold plating MIL-C-45204 Type 1, Grade C, Class 1

FREQUENCY (MHz)

-20 -10

-60

-100

-80 -90

62.6 141 219 297 375 453 547 641 734 828 922

1016 1109 1203 1297 1391 1484 1578 1672 1766 1859 1953 2047 2141 2234 2328 2422 2516 2609 2703 2797 2891 2984

BNC TP-1 and TP-2 Terminating Plugs

CF TP-1 and TP-2 Terminating Plugs

Trang 44

500 cycles minimum

6 lbs minimum

500 cycles minimum Torque 20 in/lb minimum See Interface Detail below

Coupling Nut Proof Torque:

Trang 45

.030 Ohm maximum change post environmental

500 cycles minimum

500 cycles minimum Longitudinal force 3 lbs typical See Interface Detail below

MIL-STD-202 Method 215 Tarnish-resistant electroless nickel plating

Straight RCA Connectors

Center Contact Retention:

Trang 46

MATERIALS

plating per QQ-N-290

MIL-G-45204 Type 1

and Gold per MIL-G-45204 Type 1

and female connector mated together

TRP-2

Trang 47

3.47" 1.288"

48° Angled Adapter

Straight Adapter Kit

Trang 48

.44" X 25" SLOT (4)

TCP-XXX USA ProAx Triax

TRP-2

Trang 49

#4 CLEARANCE HOLES

.075"

REF 2.426 REF 2.848

Trang 50

(3.02 cm)

20-Position Chassis Front View 20-Position Chassis

Module

8.55"

(21.72 cm) 8.19"

(20.8 cm)

Module Front View

Module

Side View

20-Position Chassis Side View

18.312 REF 18.312 REF 19.00 REF

9.29 REF

2-Position Chassis Front View

2-Position Chassis

2-Position Chassis Top View

3.85"

(9.78 cm)

0.56" (1.42 cm)

0.725" (1.84 cm)

Tiêu đề	Drawings and specifications
Trường học	ADC
Chuyên ngành	Broadcast Products
Thể loại	technical documentation
Năm xuất bản	2006
Thành phố	unknown

Định dạng
Số trang	72
Dung lượng	10,48 MB