Fiber Connectivity and Cable Management

Front Patch Connector Style0 Pigtail for splicing Monitor Port Connector 0 No monitor F SMFC 8 degree Angle Polish J SMSC 8 degree Angle Polish Rear Cable Management/Splice 0 Patch cord

Fiber Connectivity and

Cable Management

Pro Patch™Optical Normal Through Panel 136

FL2000 System 140

FPL series Fiber Panels 152

Fiber Management Tray 156

FL1000 Fiber Termination Products 162

FiberGuide®Fiber Management System 167

Fiber Optic Patch Cords 168

on the rear of the panel, with a normal through connection between the “Source” and “Destination” ports For greater convenience and reliability, patch and monitoring capabilities are accessed on the front

of the panel.

Features

Two density options:

• 3RU chassis houses 6 modules to provide 24

fiber terminations (12 pairs) using simplex connectors (SC, FC, ST)

• 4RU chassis houses 6 modules to provide 48

fiber terminations (24 pairs) using form-factor connectors (LC, LX.5)

small-Functionality:

• Each module contains pairs of “Source” and

“Destination” fibers plus optional monitor ports and a switch for emergency patching.

• Accommodates 1310 and 1550 singlemode

wavelengths (switch wavelength range is 1290-1330 and 1525-1610)

• Connector ports on front and rear may be

• Manual switch on front of module to change

• 19" EIA flush mounting

• Hot swappable power supply

to power switches inside modules

• 110/220 IEC interface

Normal

Switch

90/10 Tap90%

10%

Source

SourceDestination

Destination

These are preliminary specifications

Call an ADC distributor for more details To find a distributior near you visit adc.com/partners.

The new Pro Patch Optical Normal Through Panel provides patch by exception, normal through functionality With this newly designed panel, fiber “Source” and “Destination” connections are on the rear of the panel, with a normal through connection between the “Source” and “Destination” ports To enable patching functionality, a fiber patch cord is plugged into the front of the panel and

a switch is flipped.

Module Schematics

O r d e r i n g I n f o r m a t i o n

Empty chassis with power supply

Power supply

Front Patch Connector Style

0 Pigtail for splicing

Monitor Port Connector

0 No monitor

F SMFC (8 degree Angle Polish)

J SMSC (8 degree Angle Polish)

Rear Cable Management/Splice

0 Patch cord slack storage

2 Heat shrink splice trays

3 Mass Fusion splice trays

1-6 Number of modules loaded

The information below explains the ordering numbers contained in the charts on this page.

Custom configurations are available: please contact ADC.

Front Patch Connector Style

0 Pigtail for splicing

Monitor Port Connector

0 No monitor

F SMFC (8 degree Angle Polish)

J SMSC (8 degree Angle Polish)

2 Pair switch together

The information below explains the ordering numbers contained in the charts on this page.

Custom configurations are available: please contact ADC.

• A complete line of modular panels developed for cabinet, rack and wall mounting

• Fully adaptable for large or small main distribution frame (MDF), intermediate distribution frame (IDF) ortelephone closet (TC) applications

• Designed for 19" (48.26 cm) EIA rack or cabinet environment found in many broadcast networks; optionalbrackets are available to accommodate 23" (58.42 cm) or ETSI rack or cabinet mounting

• Provides termination, splicing and storage capabilities for in-building cables, outside plant cables and fiber opticterminal (FOT) equipment patch cords

• Modular design offers maximum flexibility to satisfy both current needs and future growth requirements

• A full line of options and accessories ensures compatibility with existing optical equipment

• FL2000 systems accommodate the Value-Added plug-in modules, adding flexibility and functionality to theoptical transport systems Splitters, wavelength division multiplexers (WDMs) and other optical componentscan be easily incorporated

• All FL2000 panels accommodate the modular FL2000 6pak plug-ins 6paks are available in all connector stylesand can be ordered as needed

• ADC's patented removable angled retainers allow easy access for single fiber maintenance

• FL2000 panels and feature superior vertical cable protection and management

• Rack mount panels are hinged on one side, allowing full access to the rear of the front plate and the interior

of the panel

• Rack mount panels are equipped with mounting brackets to provide 5" (12.7 cm) recess mounting; mountingbrackets are available for virtually any mounting application

• Rack mount panels can be wall mounted

• The new FL2000 splice wheel allows easy roll-up of pigtail and buffer tube lengths and superior bend

radius protection

• The FL2000 splice deck is available to complete existing installations

FL2000 Rack Mount Chassis

FL2000 Rack Mount Chassis (door open)

ST®LX.5® 1

LC1Ultra PCFC

FC with zirconia adapter

FC 8° angled polishUltra PCSC

SC with zirconia adapter

SC 8° angled polishDuplex SC

Ultra PCST

ST® with zirconia adapterE-2000 8° angled polishLX.5® 1

LC1

FC Hybrid (FC connector on front;

SC connector on back of bulkhead)

ST® Hybrid (ST® connector on front;

Number of Splice Decks

ABCDEF

19" (48.26 cm) standard (19.6" [49.78 cm] overall) 19" (48.26 cm) maximum (19" [48.26 cm] overall) 19" (48.26 cm) flush mount 23" (58.42 cm) centered 23" (58.42 cm) with oversized VCGETSI flush mount

Mounting Style 3

1 LX.5® and LC connectors and adapters double the capacity of the panel by terminating two fibers at each adapter

2 For use with LX.5®and LC

3 Mounting kit shipped unattached if other than standard mounting style

02

1 clamp (standard)

2 clamps

Number of Cable Clamps

01256

LatchHole PlugScrewdriverK1 LockK2 Lock

Latch Type

APHRKY

Adapters only

6 fiber softwall bundle

6 fiber Maxi-Strip

12 fiber ribbon

12 fiber softwall bundle2

12 fiber Strip

Maxi-Pigtail or Adapter Type

0MW12378

None or N/AMechanical (Wheel)Heat ShrinkFusion (Wheel)Bare Fusion (Deck)Heat Shrink Fusion (Deck)Mechanical (Deck)Raychem Universal (Deck)Nortel (Deck)

Splice Type

MN

Mechanical (Wheel)Nortel (Wheel)

Splice Type 2

Features

FL2000 panels can also be shipped with 6paks

and/or pigtails pre-installed at the factory

• Reduce installation time

• Simplify ordering process

Use this configuration guide to determine the

ordering number right for your application

FL2000 System

Rack or Cabinet Mount Termination/Splice Panels

Preconfigured Panels with Pigtails, Black

FL2000 panels can also be shipped with 6paks

and/or pigtails pre-installed at the factory

• Reduce installation time

• Simplify ordering process

Use this configuration guide to determine the

ordering number right for your application

ST® with zirconia adapter

E-2000 8° angled polish

LX.5®1

LC1

FC Hybrid (FC connector on front;

SC connector on back of bulkhead)

ST® Hybrid (ST® connector on front;

SC connector on back of bulkhead)

1 LX.5® and LC connectors and adapters double the

capacity of the panel by terminating two fibers at each adapter

2 For use with LX.5® and LC

3 Mounting kit shipped unattached, if other than standard mounting style

LatchHole PlugScrewdriverK1 LockK2 Lock

Latch Type

12

Pigtail or Adapter Type

Number of Ports Loaded

ABCDEF

19" (48.26 cm) standard (19.6" [49.78 cm] overall) 19" (48.26 cm) maximum (19" [48.26 cm] overall) 19" (48.26 cm) flush mount 23" (58.42 cm) centered 23" (58.42 cm) with oversized VCGETSI flush mount

Mounting Style 3

02

1 clamp (standard)

2 clamps

Number of Cable Clamps

FL2000 System

Rack or Cabinet Mount Termination Panels

Preconfigured Panels with Pigtails, Black

- Wall mounting option available

- Other mounting kits availablePlease see pages 143-146

• Hinged on left front side1; allows full access to rear

of front plate and interior of panel

• FL2000 6pak adapter plug-ins ordered separately

• Constructed of high strength aluminum

• Equipped with removable metal doors with

Plexiglas windows

• Designation labels included with each panel

• Complete line of accessories including locks

Rack or Cabinet Mount Panel, black

Includes vertical cable management trough

Wall mount bracket, black - needed for

12 fiber capacity panel only

Cable clamp kit - One per cable recommended

FL2-ACC008

FL2-ACC007FL2-ACC021FL2-ACC033FL2-ACC006

Panel Height

1.75" (4.45 cm)3.50" (8.89 cm)5.25" (13.34 cm)5.25" (13.34 cm)8.75" (22.23 cm)10.50" (26.67 cm)

Splice Panel for Splice Wheel, black

(Accepts splice wheel only)

48 fiber capacity

96 fiber capacity

144 fiber capacity

Splice Wheel with Splice Chip

Heat shrink fusionMechanicalNortel

Splice Panel for Splice Deck for Existing Installations, black

(Also accepts splice wheel)

48 fiber capacity

96 fiber capacity

144 fiber capacity

Splice Deck with Splice Chip for Existing Installations

Heat shrink fusionMechanicalBare fusionNortel QPAK

Cable Clamp Kit (kit of 1)

Outer diameter 2" to 8"

Outer diameter 7" to 1.0"

Panel Height

3.5" (8.89 cm)7" (17.78 cm)8.75" (22.23 cm)

3.5" (8.89 cm)7" (17.78 cm)8.75" (22.23 cm)

Ordering Number

FL2-48SPNL2-BFL2-96SPNL2-BFL2-144SPNL2-B

FST-DRS12-HSFST-DRS12-MTFST-DRS24-NT

FL2-48SPNL-BFL2-96SPNL-BFL2-144SPNL-B

FL2-RSPLCE-HS-BFL2-RSPLCE-MT-BFL2-RSPLCE-FT-BFL2-RSPLCE-NT-B

FL2-ACC007FL2-ACC021

SPLICE CHIP(S) (HEAT SHRINK SHOWN)

SPLICE DECK TOP

BOTTOM SIDE

CLEAR COVERS

Splice Wheel with Splice Chip (Black)

Splice Deck with Splice Chip (Black)

Features

• Offers combination of splicing protection

and associated fiber/pigtail storage

• Splice panel can be mounted in conjunction

with any FL2000 termination panel or as astand-alone splice panel

• Occupies same footprint and offers

same mounting options as FL2000 tion panels

termina-• Accepts the new ADC splice wheel for

efficient management of fiber cable and splice protection

• Accepts the traditional ADC splice deck

3.50" (8.89 cm)

Mounting kits sold separately, see pages 167-170

Splice Wheel with Splice Chip

Heat shrink fusion

Mechanical

Nortel

Splice Deck with Splice Chip

Heat shrink fusion

FST-DRS12-HSFST-DRS12-MTFST-DRS24-NTFL2-RSPLCE-HS-BFL2-RSPLCE-MT-BFL2-RSPLCE-FT-BFL2-RSPLCE-NT-B

Panel Height

3.5" (8.89 cm)5.25" (13.34 cm)8.75" (22.23cm)14" (35.56 cm)17.5" (44.45 cm)

Rack or Cabinet Mount Termination/Splice Panels

Termination/Splice Panel

5.25" (13.34 cm)

19.60"

(49.79 cm) 10.14"

(25.76 cm) 4.95"

- Wall mounting option available

- Other mounting kits available

Please see pages 143-146

• Hinged on left front side1for complete access

to interior of termination section

• Ability to quickly and easily configure, utilizing

the 6pak assemblies (ordered separately)

• Complete line of accessories including locks

for security

• Uses ADC splice wheels or splice decks

1Right hinged also available

Mounting kits sold separately, see pages 167-170

• Pigtails consist of a single outer jacket

containing six color-coded 900 µm fibers

• One end of pigtail terminated to chosen

connector style and installed into the 6pak plug-in adapters

• ADC recommends specific breakouts for panel

and wall mount box products

• Saves installation time

6pak Connector Plug-Ins

With Adapters and Pigtails

Multimode Pigtails and Adapters

FL2 - 6P

Ordering Number

Fiber Type

CD

StrandedMaxi-Strip

Length (in meters)

03W05R

3 m (9.84') pigtail for wall mount boxes

5 m (16.4') pigtail for rack mount panels

3 m (9.84') pigtailfor wall mount boxes

5 m (16.4') pigtail for rack mount panels

59ADY6

BC

SCFCDuplex SC

Multimode 62.5/125Multimode 50/125

S

C B

S Singlemode

Connector Style

Duplex SCUltra PCFC Ultra PCSTUltra PCSCPCFC 8° angled polishPCSC 8° angled polishE-2000 angled polish

PCSC 9° angled polish

FC Hybrid (FC connector on front;

SC connector on back of bulkhead)

Singlemode Pigtails and Adapters

Note: 6paks are putty in color

1LX.5®and LC 6paks are loaded with

12 fiber pigtails

Note: 6paks are putty in color

1LX.5®and LC 6paks are loaded with

12 fiber pigtails

O r d e r i n g I n f o r m a t i o n

Description Multimode

FC with 8° angled polish

SC with 8° angled polish

SC, zirconia

ST®, zirconia

FC, zirconiaE-2000, angled polishLX.5®

LCHybrid: FC front, SC backHybrid: ST®front, SC back

6pak blank plug-in

Features

• Completely interchangeable between

FL2000 panel and wall box products

• Can be ordered with all standard types of

simplex and duplex single and multimodeadapters and connectors

• Feature ADC‘s patented removable angled

retainers which provide superior fiber management

• No tools required to install into FL2000

boxes or panels

• Can be ordered with adapters only, or for

quick and easy installation, with pre-terminated 3 meter (9.84') or 5 meter(16.4') pigtails

6pak Blank Plug-In

6pak Adapter Plug-Ins

For all FL2000 Termination Products

6pak Plug-In (shown with singlemode simplex adapters)

6pak Plug-In (shown withmulitmode simplex adapters)

6pak Plug-In (shown with singlemode duplex adapters)

6pak Plug-In (shown withmultimode duplex adapters)

6pak Plug-In (shown withmultimode LX.5®adapters)6pak Plug-In (shown with singlemode LX.5®adapters)

(12.70 cm)

(4.93 cm) 1.94"

6.65"

(16.89 cm)

(47.82 cm) 18.83"

Rear Guard Box (optional with some racks)

Rack shown

as reference

Ordering Number

FL2-FLMT0175-BFL2-FLMT0350-BFL2-FLMT0525-BFL2-FLMT0700-BFL2-FLMT0875-BFL2-FLMT1050-B

Panel Height

1.75" (4.45 cm)3.5" (8.89 cm)5.25" (13.34 cm)7" (17.78 cm)8.75" (22.23 cm)10.5" (26.67 cm)

• Panels typically shipped from factory equipped

for this mounting

• Panels shipped with

FL2000 System

Mounting Options – 19" (48.26 cm) Rack Mounting

Panel Height

1.75" (4.45 cm)3.5" (8.89 cm)5.25" (13.34 cm)7" (17.78 cm)8.75" (22.23cm)10.5" (26.67 cm)14" (35.56 cm)17.5" (43.18 cm)

Kit includes: new vertical cable guide with

integrated mounting holes

18.31"

(46.51 cm)

RACK SHOWN FOR REFERENCE

REAR GUARD BOX (OPTIONAL WITH SOME RACKS)

New VCG with integrated mounting holes

FL2000 System

Mounting Options – 19" (48.26 cm) Rack Mounting

19" (48.26 cm) Maximum Mounting

23" with Large VCG, black

Kit includes: new vertical cable guide with

integrated mounting holes

Ordering Number

FL2-23VCG0175-BFL2-23VCG0350-BFL2-23VCG0525-BFL2-23VCG0700-BFL2-23VCG0875-BFL2-23VCG1050-BFL2-23VCG1400-BFL2-23VCG1750-B

Panel Height

1.75" (4.45 cm)3.5" (8.89 cm)5.25" (13.34 cm)7" (17.78 cm)8.75" (22.23cm)10.5" (26.67 cm)14" (35.56 cm)17.5" (43.18 cm)

O r d e r i n g I n f o r m a t i o n

25.88"

(65.74 cm) 21.50"

(56.67 cm) 21.50"

18.31"

(46.51 cm)

Inner IMP Mounting

23" (58.42 cm) Centered (Extender Bracket Mounting)

Ordering Number

FL2-EB0175P-BFL2-EB0350P-BFL2-EB0525P-BFL2-EB0700P-BFL2-EB0875P-BFL2-EB1050P-BFL2-EB1400P-BFL2-EB1750P-B

Panel Height

1.75" (4.45 cm)3.5" (8.89 cm)5.25" (13.34 cm)7" (17.78 cm)8.75" (22.23 cm)10.5" (26.67 cm)14" (35.56 cm)17.5" (43.18 cm)

O r d e r i n g I n f o r m a t i o n

Description

23" Rack Centered

(with extender brackets)

This kit can be used with flush mount

brackets (see page 149) to achieve 23"

flush mounting, as well as 1", 2", or 4"