All rights reserved.. ICND1 v1.0—2-1Password Recovery Password Recovery Procedure for the Cisco Catalyst Fixed Configuration Layer 2 and Layer 3 Switches... All rights reserved.. ICND1
Trang 1© 2007 Cisco Systems, Inc All rights reserved ICND1 v1.0—2-1
Password Recovery
Password Recovery Procedure for the
Cisco Catalyst Fixed Configuration
Layer 2 and Layer 3 Switches
Trang 2© 2007 Cisco Systems, Inc All rights reserved ICND1 v1.0—2-2
Step−by−Step Procedure Step 1:
Attach a terminal or PC with terminal emulation (for example,
Hyper Terminal) to the console port of the switch
Step 2:
Unplug the power cable
Trang 3© 2007 Cisco Systems, Inc All rights reserved ICND1 v1.0—2-3
Step−by−Step Procedure
Step 3:
- Power the switch and bring it to the switch: prompt
- Hold down the mode button located on the left side of the front
panel, while you reconnect the power cable to the switch
Trang 4© 2007 Cisco Systems, Inc All rights reserved ICND1 v1.0—2-4
Step−by−Step Procedure Step 4:
Issue the flash_init command
Trang 5© 2007 Cisco Systems, Inc All rights reserved ICND1 v1.0—2-5
Step−by−Step Procedure Step 5:
Issue the dir flash: command
Trang 6© 2007 Cisco Systems, Inc All rights reserved ICND1 v1.0—2-6
Step−by−Step Procedure Step 6:
Type rename flash:config.text flash:config.old to rename the
configuration file
Trang 7© 2007 Cisco Systems, Inc All rights reserved ICND1 v1.0—2-7
Step−by−Step Procedure Step 7:
Issue the boot command to boot the system
Trang 8© 2007 Cisco Systems, Inc All rights reserved ICND1 v1.0—2-8
Step−by−Step Procedure Step 8:
Trang 9© 2007 Cisco Systems, Inc All rights reserved ICND1 v1.0—2-9
Step−by−Step Procedure Step 9:
Step 10:
Trang 10© 2007 Cisco Systems, Inc All rights reserved ICND1 v1.0—2-10
Step−by−Step Procedure Step 11:
Step 12: