Design guide- Embedment Depth for Concrete and Steel Poles Example Statement: Example 10 demonstrates a design procedure for a drilled shaft foundation for a cantilever sign structure. The cantilever supports a sign panel attached to the horizontal support. The example is only for the design of the shaft foundation. It does not discuss cover design of the members and attachment. The design follows the LRFD Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals, First Edition 2015, with 2017 updates (AASHTO LTS), with references to AASHTO LRFD Bridge Design Specifications, 7th Edition, with 2016 Interims (AASHTO). Example 10 was designed with a geotechnical investigation performed on the soil. If one does not have geotechnical data, it is CDOT''s preference to use the Brom''s method in Section 13 of the AASHTO LTS to determine shaft embedment.
Trang 1RUS Bulletin 1724E-205 Viewing Instructions
There are both bookmarks and links imbedded in this file
Browsing with bookmarks
Bookmarks mark parts of a document for quick access
To jump to a topic by using its bookmark:
1 The bookmarks are shown on the left side of the screen If a triangle appears to theleft of the bookmark, click the triangle to show or hide subordinate bookmarks
2 To go to the destination specified by a bookmark, click the bookmark text or click the page icon to the left of the bookmark name
Trang 25THIS PAGE IS INTENTIONALLY
BLANK
Trang 27THIS PAGE IS INTENTIONALLY
BLANK
Trang 49THIS PAGE IS INTENTIONALLY
BLANK