Dang ; Texas Instruments Inc.
Trang 1; MSP430G2x21/G2x31 Demo - USI SPI Interface to HC165/164 Shift Registers
;
; Description: Demonstrate USI in two-way SPI mode Data are read from
; an HC165, and same data written back to the HC164
; ACLK = n/a MCLK = SMCLK = Default DCO, USI = SMCLK/2
;
; MSP430G2x21/G2x31/3
;
-; /|\| XIN|-; | | | ^ HC164 ; HC165 |RST XOUT|- |
-; - | | |-|/CLR,B | 8
; 8 | /LD|< -|P1.1 SIMO0/P1.6| ->|A Qx| \-> ; -\->|A-H CLK|< -|P1.5/SCLK - P1.5| ->|CLK |
; |-|INH QH| ->|P1.7/SOMI | | |
; |-|SER | | | | |
; - | | | | | |
; ; D Dang ; Texas Instruments Inc ; October 2010 ; Built with IAR Embedded Workbench Version: 5.10 ;******************************************************************************* #include "msp430g2221.h"
ORG 0F800h ; Program Reset
; -RESET mov.w #0280h,SP ; Initialize stackpointer StopWDT mov.w #WDTPW+WDTHOLD,&WDTCTL ; Stop watchdog timer SetupP1 bis.b #02h,&P1OUT ;
bis.b #02h,&P1DIR ;
SetupUSI bis.b #USIPE7+USIPE6+USIPE5+USIMST+USIOE,&USICTL0; Port, SPI master bis.b #USICKPH+USIIE,&USICTL1 ; Counter interrupt, flag remains mov.b #USIDIV_1+USISSEL_2,&USICKCTL ; /2 SMCLK bic.b #USISWRST,&USICTL0 ; Enable USI mov.b #08h,&USICNT ; init-load counter, clears flag ;
Mainloop call #RXTX_HC16x ; Exchange data Delay push.w #0 ; Software delay D1 dec.w 0(SP) ;
jnz D1 ;
incd.w SP ;
jmp Mainloop ; Repeat ;
; -RXTX_HC16x; HC165 > URXBUF0 UTXBUF0 > HC164
; -TX0 bit.b #USIIFG,&USICTL1 ; USART0 TX buffer ready? jz TX0 ; Jump > TX buffer not ready bic.b #02h,&P1OUT ; Latch data into 'HC165 bis.b #02h,&P1OUT ;
; ******************** ; Read data are ready to be written mov.b #08h,&USICNT ; Load counter, clears flag ret ; Return from subroutine ;
; -; Interrupt Vectors Used
ORG 0FFFEh ; MSP430 RESET Vector DW RESET ;
END