; Software sets ADC10SC to start sample and conversion - ADC10SC ; automatically cleared at EOC.. ADC10 internal oscillator times sample 16x ; and conversion.. In Mainloop MSP430 waits i
Trang 1; MSP430F20x2 Demo - ADC10, Sample A1, AVcc Ref, Set P1.0 if A1 > 0.5*AVcc
;
; Description: A single sample is made on A1 with reference to AVcc
; Software sets ADC10SC to start sample and conversion - ADC10SC
; automatically cleared at EOC ADC10 internal oscillator times sample (16x)
; and conversion In Mainloop MSP430 waits in LPM0 to save power until ADC10
; conversion complete, ADC10_ISR will force exit from any LPMx in Mainloop on
; reti If A1 > 0.5*AVcc, P1.0 set, else reset
;
; MSP430F20x2
;
-; /|\|
XIN|-; | | |
; |RST
XOUT|-; | |
; > -|P1.1/A1 P1.0| > LED
;
; L Westlund
; Texas Instruments Inc
; May 2006
; Built with IAR Embedded Workbench Version: 3.41A
;*******************************************************************************
#include "msp430x20x2.h"
RSEG CSTACK ; Define stack segment
RSEG CODE ; Assemble to Flash memory
; -RESET mov.w #SFE(CSTACK),SP ; Initialize stackpointer
StopWDT mov.w #WDTPW+WDTHOLD,&WDTCTL ; Stop WDT
SetupADC10 mov.w #ADC10SHT_2+ADC10ON+ADC10IE,&ADC10CTL0 ; 16x, enable int mov.w #INCH_1, &ADC10CTL1
bis.b #02h,&ADC10AE0 ; P1.1 ADC10 option select
SetupP1 bis.b #001h,&P1DIR ; P1.0 output
;
Mainloop bis.w #ENC+ADC10SC,&ADC10CTL0 ; Start sampling/conversion
bis.w #CPUOFF+GIE,SR ; LPM0, ADC10_ISR will force exit bic.b #01h,&P1OUT ; P1.0 = 0
cmp.w #01FFh,&ADC10MEM ; ADC10MEM = A1 > 0.5AVcc?
jlo Mainloop ; Again
bis.b #01h,&P1OUT ; P1.0 = 1
jmp Mainloop ; Again
;
; -ADC10_ISR; Exit LPM0 on reti
bic.w #CPUOFF,0(SP) ; Exit LPM0 on reti
reti ;
;
COMMON INTVEC ; Interrupt Vectors
ORG ADC10_VECTOR ; ADC10 Vector
DW ADC10_ISR
ORG RESET_VECTOR ; POR, ext Reset
DW RESET
END