TGV tumble generator valve assembly

FUEL INJECTION FUEL SYSTEMS TUMBLE GENERATOR VALVE ASSEMBLY 11.Tumble Generator Valve As-sembly A: REMOVAL 1 Release the fuel pressure.. 2 Open the fuel filler lid and remove the fuel f

FUEL INJECTION (FUEL SYSTEMS)

TUMBLE GENERATOR VALVE ASSEMBLY

11.Tumble Generator Valve

As-sembly

A: REMOVAL

1) Release the fuel pressure <Ref to FU(STi)-45,

RELEASING OF FUEL PRESSURE,

OPERA-TION, Fuel.>

2) Open the fuel filler lid and remove the fuel filler

cap

3) Disconnect the ground cable from battery

4) Remove the intake manifold <Ref to

FU(STi)-14, REMOVAL, Intake Manifold.>

5) Disconnect the connector from the tumble

gen-erator valve sensor

6) Disconnect the connector from the tumble

gen-erator valve actuator

7) Remove the fuel injector <Ref to FU(STi)-32,

REMOVAL, Fuel Injector.>

8) Remove the tumble generator valve body from the intake manifold

B: INSTALLATION

Install in the reverse order of removal

NOTE:

Always use new gaskets

Tightening torque:

8.25 N·m (0.84 kgf-m, 6.1 ft-lb)

FU-00009

FU-00617

FU-00616

FU-00053

FU-00053