PROII-8-1-Getting-Started-Guide

PROII-8-1-Getting-Started-Guide PROII-8-1-Getting-Started-Guide PROII-8-1-Getting-Started-Guide PROII-8-1-Getting-Started-Guide PROII-8-1-Getting-Started-Guide

Trang 1

PRO/II ® 8.1 Getting Started Guide

www.cadfamily.com EMail:cadserv21@hotmail.com

The document is for study only,if tort to your rights,please inform us,we will delete

Trang 2

PRO/II 8.1

Getting Started Guide

Use of the PRO/II program, and its component parts and subsystems, is governed by the terms and conditions of a separate written agreement between your employer and Invensys Systems, Inc., its subsidiaries or affiliates.

the material protected by this copyright may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopy- ing, recording, broadcasting, or by any information storage and retrieval system, without permission in writing from Invensys Systems, Inc.

Trademarks PRO/II, SIM4ME, HEXTRAN, INPLANT, Invensys, and SimSci-Esscor are

trademarks of Invensys plc, its subsidiaries, and affiliates AMSIM is a trademark of DBR Schlumberger Canada Limited RATEFRAC and BATCHFRAC are registered marks of KOCH-GLITSCH Visual Fortran is a trademark of Intel Corporation Windows NT, Windows 2000, Windows XP, and Windows 2003 are trademarks of Microsoft Corporation FLEXlm is a trademark of Macrovision Adobe, Acrobat, and Exchange are trademarks

of Adobe Intel and Pentium are registered marks of Intel HP is a registered mark of Hewlett-Packard Epson is a registered mark of Seiko Epson Corp Canon is a registered mark of Canon Inc NEC is a registered mark of NEC All other products noted herein are trademarks of their respective companies.

All other products may be trademarks of their respective owners.

U.S GOVERNMENT RESTRICTED RIGHTS LEGEND The Software and accompanying written materials are provided with restricted rights Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) (1) (ii) of the Rights

in Technical Data And Computer Software clause at DFARS 252.227-7013

or in subparagraphs (c) (1) and (2) of the Commercial Computer Restricted Rights clause at 48 C.F.R 52.227-19, as applicable The Contractor/Manufacturer is : Invensys Systems, Inc (Invensys SimSci- Esscor) 26561 Rancho Parkway South, Suite 100, Lake Forest, CA 92630, USA.

Software-Printed in the United States of America, May 2007.

Trang 3

Introduction

About this Manual vii

About PRO/II viii

About SimSci-Esscor viii

Where to Find PRO/II Documentation ix

Online Documentation ix

Online Help x

Where to Find Additional Help x

Technical Support xi

Authorized SimSci-Esscor Technical Support Centers .xiii

Chapter 1 Installation Requirements

Verifying the Package Contents 1-1 Installation Media 1-1 Documentation 1-1 Software Requirements 1-2 Disk Space Requirements 1-2 Virtual Memory Requirement 1-3 Security 1-4 USB Security .1-4 FLEXlm7.2 Security 1-4 FLEXlm9.5 Security 1-4 TOKEN Security 1-5 Switching Security Types 1-5

Chapter 2 Installing PRO/II

Installing a Local Version of PRO/II 2-2 Directory Structures and Desktop Icons 2-5 PRO/II Installed Directory Structure (Standalone) 2-5 Installing a Network Version of PRO/II 2-6 Testing PRO/II 2-10 Reviewing the Results .2-11 Generate an Output Report 2-11

Trang 4

iv Contents

Converting Files 2-11 Modifying/Repairing/Removing PRO/II 2-11

Chapter 3 Installing Acrobat Reader

Installing Acrobat Reader 3-1 Testing the Installation 3-2 Uninstalling Acrobat Reader 3-2

Chapter 4 Usage Reporting

Installing the Usage Reporting Program 4-1 When to Use the Usage Reporting Program 4-2 Running the Usage Reporting Program 4-3 Option 1 – Create USAGE File 4-4 Option 2 – Reinitialize the USAGE File 4-4 Option 3 – Report Usage Only 4-4 Option 4 – Report from the Backup File 4-5 Option 5 – Dump Contents of Usage File 4-7 Option 6 – Dump Contents of Backup File 4-7 ASCII Dump Data Format 4-7 Usage Records: Example Run Data 4-8 Using the Data 4-8

Chapter 5 Installation Troubleshooting

Diagnosis of Problems with TOKEN and FLEXlm 7.2/9.5 Security 5-1

Diagnosis of USB Security Problems 5-11 General License Security Questions 5-16

Chapter 6 Tutorial : Introduction

What can PRO/II do? 6-1 Simulation Status Conventions 6-1 How is this Tutorial Organized? 6-2 Where to Start? 6-2 Where to Find Additional Help? 6-3 Description of the Problem 6-3 How to Proceed? 6-4

Chapter 7 Session 1: Separator

Starting PRO/II 7-2 Building the Flowsheet (required) 7-3

Trang 5

Process Units .7-3 Process Streams .7-4 Correcting the PFD Diagram 7-6 Defining the Component List (required) 7-6 Defining a Thermodynamic Method Set (required) .7-9 Specifying Unit Operation and Stream Data (required) 7-12 Analyzing the Data Requirements 7-13 Stream Data 7-13 Unit Operations Data 7-18 Saving the Simulation 7-18 Running the Simulation (required) 7-22 Reviewing the Simulation Results 7-22 Viewing the Output Report 7-23 Using the Flash Tool (optional) 7-24

Chapter 8 Session 2: Complete Expander Plant

Building the Flowsheet (required) 8-1 Modifying the Stream Data (required) .8-8 Specifying the Process Unit Data (required) 8-8 Heat Exchangers 8-8 Compressor 8-12 Column 8-15 Running the Simulation (required) 8-25 Reviewing the Simulation Results 8-25 Modifying the Simulation Defaults 8-26

Chapter 9 Session 3: Presentation of Output

Modifying the Flowsheet Stream Border Style 9-1 Displaying Stream Properties on the PFD 9-3 Exporting the PFD to the Windows Clipboard 9-5 Producing a Stream Report in a Spreadsheet .9-6 Creating Pages for Printing the PFD 9-7 Creating Plots .9-10 Displaying Stream Results in HTML 9-11 Block Diagrams 9-13

Index

Trang 6

vi Contents

Trang 7

About this Manual

This manual will guide you through the installation of the PRO/II family of software products and provides you with three sample sessions on using PRO/II.

An outline of this document is provided below.

Chapter 1 Installation

Requirements

Outlines installation and security requirements.

Chapter 2 Installing PRO/II Describes how to install PRO/II 8.1.

Chapter 3 Installing Acrobat

Reader

Describes how to install Adobe® Acrobat®

Reader which is used to access documents online.

Chapter 4 Usage Reporting Explains how to install and run the Usage

Chapter 6 Tutorial : Introduction Introduces the user to PRO/II capabilities,

conventions and finding information.

Chapter 7 Session 1: Separator Step-by-step instructions to enable you to

simulate a minimal set of process units in a gas processing application.

Chapter 8 Session 2: Complete

Expander Plant

Additonal process units are added to complete

an entire demethanizer/expander plant simulation.

Trang 8

viii Introduction

About PRO/II

PRO/II is a comprehensive computer simulation system for process engineers in the chemical, petroleum, natural gas, solids processing, and polymer industries It combines the data resources of a large chemical component library and extensive thermodynamic property prediction methods with the most advanced and flexible unit operations techniques It provides the process engineer with the computational

facilities to perform all mass and energy balance calculations needed to model most steady-state processes.

The PRO/II process simulation program is designed with both the beginner and the expert in mind It is based on a

foundation of comprehensive, reliable, and accurate simulation capabilities It is easy to use, and the input language is an extension of the universal language of chemical engineering Expert systems, extensive input processing, and error checking allow even an inexperienced user to be instantly productive These features have made PRO/II an industry standard.

About SimSci-Esscor

For 40 years, SimSci-Esscor has been a leader in the development and deployment of process simulation software, services, and complete solutions for oil and gas production, hydrocarbon and specialty chemical processing and refining, and fossil and nuclear power Benefit from products that minimize capital requirements, optimize facility performance, maximize ROI, and produce assets for:

Plant engineering design and simulation:

➤ Integrated process engineering (FEED)

➤ Pipeline production analysis, asset model management

➤ Operational analysis, optimization, process control

➤ Dynamic simulation, operator training Design-Operate-Optimize a safe and profitable plant subject to ever more stringent market and regulatory constraints SimSci- Esscor software solutions are indispensable tools in solving www.cadfamily.com EMail:cadserv21@hotmail.com

Trang 9

these three increasingly complex challenges simultaneously SimSci-Esscor is business unit of Invensys Process Systems, owned by Invensys, plc

Where to Find PRO/II Documentation

Online Documentation

Online documentation is provided in the form of .PDF files that are conveniently viewed using Adobe Acrobat Reader 7.0.5 or Acrobat Exchange 7.0.5 Adobe Acrobat Reader is freeware that can be installed from the distribution CD or from the Adobe Systems website (www.adobe.com) The online documentation files themselves remain on the CD Adobe Acrobat Reader requires seven MB of disk space in addition

to the space required to install PRO/II.

The Welcome Screen lists all the online manuals (See below)

These online manuals are stored in the SIMSCI\PROII\Manuals directory

PRO/II 8.1 Welcome Screen

Trang 10

x Introduction

Online Help

PRO/II incorporates an online Help system, a comprehensive

reference tool that quickly accesses information Online

answers are instantly available while you work In the Help

system, commands, features, and data fields are explained in

easy steps You can access the electronic Contents for the

Help system by selecting Help/Contents from the PRO/II

menu bar Context-sensitive help is accessed using the <F1>

key or the What’s This? button by placing the cursor in the

area in question

Where to Find Additional Help

Learn how to install PRO/II This document Quickly learn how to simulate a simple

flowsheet using PRO/II

PRO/II Getting Started Guide

Obtain detailed information on the capabilities and use of PRO/II

PRO/II User’s Guide

Obtain basic information on PRO/II keywords

PRO/II Keyword Manual

Obtain basic information on PRO/II calculation methods

Online Help

Obtain more detailed information on PRO/II calculation methods

PRO/II Keyword Manual

Obtain detailed information of component and thermodynamic properties

SIMSCI Component and Thermodynamic Data Input Manual See simulation examples PRO/II Keyword Manual

See simulation examples for chemical, solid processing, petrochemical, batch, and electrolyte applications

PRO/II Application Briefs Manual

Demonstrates the use of PRO/II with process industry examples

PRO/II Casebooks

Learn how to create a custom component databank using the LIBMGR utility

LIBMGR and COMPS User’s Guide

Learn about PRO/II batch reactor and distillation, electrolytes, Profimatics or polymers modules

PRO/II Add-on Modules User’s Guide

Learn about PRO/II-HTRI®, PRO/II-HTFS®

or Linnhoff March ColumnTarget Interface modules

PRO/II Interface Modules User’s Guide

Trang 11

Technical Support

SimSci-Esscor and its agents around the world provide technical support and service for PES products If you have any questions regarding the use of the program or the interpretation of output produced by the program, contact your local SimSci-Esscor representative for advice or consultation.

When calling one of the Technical Support Centers, be prepared to describe your problem or the type of assistance required Also, to expedite your call, complete the following steps before calling Technical Support:

■ Have the installation CD and all the provided documentation available

■ Determine the type of computer you are using

■ Determine the amount of free disk space available on the disk

on which the product is installed

■ Note the exact actions you were taking when the problem occurred, as well as the steps you took leading up to that point

■ Note the exact error messages that appear on your screen, as well as any other symptoms

Both new and experienced users will benefit significantly from attending one of SimSci-Esscor’s regularly scheduled training courses on PES products If you would like to obtain

a list of courses available, or if you have any questions relating to the use of a PES product, its methods, data, or technology, please call your nearest

Learn about PRO/II User-added Subroutines

or the PRO/II Data Transfer System

PRO/II Data Transfer System and User-added Subroutines User’s Guide

Learn to write applications (input and calculated) to access data in PRO/II simulation databases

COM Server Programmer’s Guide and Tutorial

Information on API’s to the PRO/II COM Server with examples

COM Server Reference Guide

Where to Find Additional Help (cont.)

Trang 13

Authorized SimSci-Esscor Technical Support Centers

Support Center Address Tel/Fax/Internet

USA and Canada Invensys Process Systems (SimSci-Esscor)

10900 Equity Drive Houston, TX 77041

Tel: + 1 800 SIMSCI 1 + 1 713 329 1600 Fax: + 1 713 329 1905 E-mail: support.simsci@ips.invensys.com USA East Coast Invensys Process Systems (SimSci-Esscor)

Gateway Corporate Center, Suite 304,

223 Wilmington-West Chester Pike, Chaddsford, PA 19317

Tel: + 1 800 SIMSCI 1 + 1 610 364 1900 Fax: + 1 610 364 9600 E-mail: support.simsci@ips.invensys.com USA West Coast Invensys Systems, Inc (Invensys, SimSci-Esscor)

26561 Rancho Parkway South, Suite 100, Lake Forest, CA 92630

Tel: + 1 800 SIMSCI 1 E-mail: support.simsci@ips.invensys.com

Mexico Invensys Systems Mexico S.A

Ejercito Nacional 1005, Col Irrigacion Deleg.

Miguel Hidalgo, Mexico city 11500

Tel: + 52 55 52 63 01 77 Fax:+ 52 55 55 57 26 20 E-mail:support.mx@simsci.com Argentina Invensys Systems Argentina Inc.

Nunez 4334 Buenos Aires (Argentina) C1430AND

Tel: + 54 11 6345 2100 Fax: + 54 11 6345 2111 E-mail:supportar@simsci.com Italy Invensys Systems Italia S.p.A

Via Carducci, 125 Sesto San Giovanni (MI) 20099, Italia

Tel: + 39 02 262 97326 Fax: + 39 02 262 97200 E-mail:support.it@simsci.com Venezuela Invensys Systems Venezuela

Torre Delta Piso 12, Av.Francisco de Miranda Altamira, Caracas 1060

Tel: + 58 212 267 5868 Fax: + 58 212 6270964 E-mail:simscilat@simsci.com Brazil Invensys Systems Brasil Ltda.

Av Chibaras, 75 - Moema Sao Paulo, SP O 4076 - 000

Tel:+ 55 11 6844 0200 Fax: + 55 11 6844 0341 E-mail: suporte.simsciesscorbrasil@ips.invensys.com Germany Invensys Systems GmbH

Willy- Brandt- Platz, 6 Mannheim, 68161

Tel: + (0800) 550 - 5510 E-mail:support.de@simsci.com

Australia and New

Zealand

Invensys Performance Solutions Level 2-4, 810 Elizabeth Street Sydney 2017, Australia

Tel: + 61 2 8396 3626 Fax:+ 61 2 8396 3604 E-mail: support.an@simsci.com Japan Invensys Systems Japan

Gotanda Chou Building 2-3-5 Higashi Gotanda, Shinagawa-ku Tokyo 141-0022, Japan

Tel: + 81 3 5793 4856 Fax:+ 81 3 5793 4855 E-mail: support@simsci.jp

Middle East Invensys ME Dubai

PO Box 61495 Jebel Ali Free Zone, Dubai

Tel: + 971 4 88 11440 Fax: + 971 4 88 11426 E-mail: support.me@simsci.com Asia - Pacific Invensys Software Systems (s) Pte Ltd.

15, Changi Business Park Central 1

Singapore 486057

Tel: + 65 6829 8657 Fax: + 65 6261 9492 E-mail: asiapactech@simsci.com

United Kingdom Invensys Systems (UK) Limited

High Bank House, Exchange Street, Stockport, Cheshire

United Kingdom SK3 OET

Tel: + 44 161 429 6744 Fax: + 44 161 480 9063 E-mail: simsci.uk@ips.invensys.com

China Invensys Process Systems (China) Co., Ltd.

809, Tower B, Eaglerun Plaza, No.26 Xiaoyun Road Chaoyang District, Beijing 100016

Tel: + 86 10 8458 5757 Fax: + 86 10 8458 4521 E-mail: china.solution@ips.invensys.com Colombia Invensys Systems LA Colombia

Calle 100 # 36-39 Int 4-203, Bucaramanga, SDER

Tel: + 57 1 3136360 E-mail: support.co@simsci.com

Korea Invensys Systems Korea

551-3 Hyosung-dong, Gyeyang-gu Incheon, 407-040

Tel: + 82-32-540-0665 Fax: + 82-32-542-3778 E-mail: jekwon.lee@ips.invensys.com

Trang 14

xiv Introduction

Trang 15

Chapter 1 Installation Requirements

This chapter surveys the contents of the PRO/II release package

Verifying the Package Contents

Installation Media

PRO/II is distributed on a CD-ROM

Documentation

A list of available PRO/II online documents is provided below

● PRO/II Keyword Manual

● SIMSCI Component and Thermodynamic Data InputManual

● PRO/II User’s Guide

● PRO/II Getting Started Guide (this document)

● PRO/II Add-On Modules User’s Guide

● PRO/II Interface Modules User’s Guide

● PRO/II Data Transfer System User’s Guide

● PRO/II User-Added Subroutines User’s Guide

● PRO/II Reference Manual

● PRO/II Tutorial Guide

● Other documentation as required

Trang 16

1-2 Installation Requirements

A complete set of online documentation is provided for each

product Refer to Chapter 3, Installing Acrobat Reader, for

instructions on accessing these files

Disk Space Requirements

A full installation of PRO/II requires approximately 225 MB of free disk space The PRO/II installation program automatically checks

Operating System

Windows 2000, Windows 2003, or Windows XP Proper installation of PRO/II under Windows

2000, Windows XP, and Windows 2003 requires administrator rights

Microsoft Office Office 200, Ofiice XP or Office 2003

Compiler To build User-Added Subroutines or PDTS

applications, one of the following two compilers

Operating System

Windows 2000, or Windows XP Proper installation of PRO/II under Windows 2000, Windows and XP requires administrator rights

Microsoft Office Office 2003 Professional with SP2

Trang 17

your system resources and notifies you if insufficient resources are available

Virtual Memory Requirement

PRO/II requires at least 55 MB of virtual memory to provide sufficient paging area

To set virtual memory in Windows 2000:

■ From the Windows Start menu, select Settings/Control Panel.

■ Open the System item and access the Advanced tab.

■ Click on the Performance Options

■ Click on the Change button in the Virtual Memory section.

■ Change the size in the “paging file size for selected drive” section, and click on the Set button.

To set virtual memory in Windows XP:

➤ From the Windows Start menu, select Settings/Control Panel.

➤ Click on the Performance and Maintenance Options.

➤ Open the System item and access the Advance tab.

➤ Click on Settings icon under Performance.

➤ Select the Advance tab.

➤ Click on the Change button in the Virtual Memory section Change the size in the “paging file size for selected drive” section, and click on the Set button.

To set virtual memory in Windows 2003 Server:

➤ From the Windows Start menu, select Settings/Control Panel.

➤ Open the System item and access the Advance tab.

Typical Installation 317 MB available disk space Includes

PRO/II, TDM, TAO, and PFE text editor

Custom Installation 225 MB available disk space Includes

Trang 18

➤ Click on Settings icon under Performance.

➤ Select the Advance tab.

➤ Click on the Change button in the Virtual Memory section.

➤ Change the size in the “paging file size for selected drive”

section, and click on the Set button.

Security

USB Security

SimSci-Esscor provides USB hardware security, in which you insert key specially coded to allow use of PRO/II During installation, the USB key should not be plugged in But after installation, simply plug the hardware directly into the computer’s USB port to start running PRO/II USB ports are not supported in Windows NT, therefore USB security is not available for this operating system

FLEXlm Server can run under Windows 2000/XP The server must have at least 5 MB of available disk space To install, learn, and troubleshoot FLEXlm security, follow the instructions provided in

the FLEXlm Security Guide included in the standard release

FLEXlm Server can run under Windows 2000/XP The server must have at least 5 MB of available disk space To install, learn, and troubleshoot FLEXlm security, follow the instructions provided in

Trang 19

the FLEXlm Security Guide included in the standard release

package

TOKEN Security

SimSci-Esscor provides a TOKEN security option on the FLEXlm Server 9.5 Application installation CD The FLEXlm License Manager is a third-party concurrent-user software licensing tool from Macrovision Corporation It is a client/server-based tool that has been customized by SimSci-Esscor

FLEXlm Server can run under Windows 2000/XP The server must have at least 5 MB of available disk space To install, learn, and troubleshoot FLEXlm security, follow the instructions provided

in the FLEXlm Security Guide included in the standard release

package

Switching Security Types

To switch to USB security:

■ Open the proii.ini file found in the user directory

■ Find the section entitled [wss_Security] and set Type=USB

■ Save the file and exit

To switch to FLEXlm7.2 security:

■ Find the section entitled [wss_Security] and set Type=FLXLM72

■ If you are running under Windows 2000/XP/2003, add the IPASSI_LICENSE_FILE=@{FLEXlm server machine name} system environment variable to your control panel/system/advanced/environment variables

■ Reboot your computer so the changes to your security environment will be correctly configured

To switch to FLEXlm9.5 security:

Trang 20

■ Find the section entitled [wss_Security] and set Type=FLXLM95

■ If you are running under Windows 2000/XP/2003, add the IPASSI_LICENSE_FILE=@{FLEXlm server machine name} system environment variable to your control panel/system/

advanced/environment variables

■ Reboot your computer so the changes to your security environment will be correctly configured

To switch to TOKEN security:

■ Find the section entitled [wss_Security] and set Type=TOKEN

■ If you are running under Windows 2000/XP/2003, add the IPASSI_LICENSE_FILE=@{FLEXlm server machine name} system environment variable to your control panel/system/

Trang 21

Chapter 2 Installing PRO/II

This chapter guides you through the installation of the PRO/II 8.1 family of software products:

■ The main PRO/II application

● Standalone

● Network

■ PRO/II Data Transfer System (PDTS)

■ PRO/II User-Added Subroutines (UAS)

■ The PRO/II add-on module:

● Chemistry Wizard

■ Thermo Data Manager (TDM) The TDM is a silent install

■ PFE Editor

■ PRO/II Usage Reporting

To begin the install procedure:

■ Insert the PRO/II CD-ROM into the CD-ROM drive

■ Browse to the root of the CD-ROM and read release notes

■ Open PROII81 folder and double-click on the setup.exe to

begin the installation The Welcome to InstallShield Wizard

dialog box appears

■ Click Next > to continue The Select Program dialog box

appears

Trang 22

2-2 Installing PRO/II

■ Select either PRO/II Local or PRO/II Network and click Next>:

■ Installing SIMSCI Common Framework 1.0 and Installing SIMSCI Common Framework 2.0 dialog boxes appear

■ Then the Welcome to InstallShield Wizard dialog box appears.

■ Click Next > to continue The License Agreement dialog box

appears Click Yes to continue

Installing a Local Version of PRO/II

At this point you may install either the Standalone version or Custom version of PRO/II

To continue the Local PRO/II installation procedure:

■ Select one of the two available local installation options:

PRO/II Local Installs a standalone version of PRO/II as a

self-contained, local entity on your machine

PRO/II Network Installs a network version of PRO/II which

is accessible to many CPUs for remote execution This installation procedure allows for additional PRO/II “New User” installs on remote machines

Note: Users installing a Local version of PRO/II on Windows 2000/2003 and Windows XP must have system administration privileges for the install to proceed properly

Standalone Installs only the PRO/II program, TDM,

SIM4ME Portal and Reports, and the PFE editor

Trang 23

■ The Choose Destination Location dialog box appears This box

shows the default destination directory (C:\SIMSCI) of the PRO/II files To install to this folder, click Next > To install to a

different folder, click Browse and select another folder.

■ If you are performing a Custom installation:

● The Select Features dialog box appears The Select Features dialog box allows you to select the components

you want to install The list box shows all possible components Check the components you want to install and note the change in required disk space Click Next >

● If you have selected Usage Reporting as part of your custom installation, the Enter Text dialog box appears

Enter your company name and click Next > (The Usage Reporting program is explained in more detail in Chapter

4, Usage Reporting.)

■ If you are installing a Standalone option (directly or through the

Custom installation), the Security Option dialog box appears

Select one of the four security options:

selection.You can install the Standalone option from this option as well as the individual components including the Translator, PRO/II program, Chemistry Wizard module, UAS, PDTS, PFE Editor, Usage Reporting and Multi Simulation Manager

Note: If you are maintaining an older version of PRO/II in the SIMSCI directory, place PRO/II version 8.1 in another directory (e.g., \P2v81) to avoid any conflicts

FLEXlm9.5 Allows PRO/II to go beyond the current

machine to obtain licenses from another machine (FLEXlm9.5 security server machine) on the network

Trang 24

● If you chose FLEXlm7.2, FLEXlm9.5, or Token, specify the prospective IPASSI FLEXlm server(s) (e.g., @server1;

@server2) to guide PRO/II to find the FLEXlm server

Click Next > to continue

■ If you are installing the Standalone option, the Select Program Folder dialog box appears By default, the setup program adds

PRO/II icons in the SIMSCI program folder You may type a new folder name, or select one from the existing folders list Click Next > to continue

■ The Start Copying Files dialog box appears which summarizes

your install settings If you want to review or change any settings click < Back If you are satisfied with the settings, click

Next > to begin copying files

■ When your installation is complete, the Complete PRO/II Installation dialog box appears Select the View README.TXT File box to view the PRO/II 8.1 Release Notes, which is

included with your distribution package

■ Click Finish to complete the Local installation

You should now test your PRO/II installation Proceed to the

Testing PRO/II section for more information.

machine to obtain licenses from another machine (FLEXlm7.2 security server machine) on the network

USB Utilizes a USB hardware key attached to

the USB port on the back of the current machine for licensing purposes Using this type, PRO/II will only search this hardware key for license(s)

machine to obtain licenses from a Token server on the network

Note: Setup determines if it is necessary to restart the computer If

so, it asks whether you want to restart the system now or later

Trang 25

Directory Structures and Desktop Icons

PRO/II Installed Directory Structure (Standalone)

The Standalone Installation will setup all PRO/II files under the

directories shown below

A typical installation creates the following eight icons:

C:\SIMSCI\PROII81\RESOURCE

C:\SIMSCI\PROII81\ManualC:\SIMSCI\PROII81\HLPC:\SIMSCI\OLISystemC:\Program Files\PFE32C:\SIMSCI\TDMC:\SIMSCI\SIM4MEPortal10C:\SIMSCI\

MultiSimulationManager10C:\Program Files\SIMSCI\

SIMSCICFI10C:\Program Files\SIMSCI\

SIMSCICFI20

[Main PRO/II directory][PRO/II user’s directory][Binary files]

[System files]

[Resource files]

[PRO/II Documentation][Online help files]

[Chemistry Wizard]

[PFE32 file editor files][TDM files]

[SIM4ME Portal files]

[Multi Simulation Manager files]

[SIMSCI Common Framework Files]

Trang 26

Installing a Network Version of PRO/II

A system administrator usually installs the network version As the system administrator, you have two options:

1 Copy the entire CD-ROM contents onto the network

2 Install executables onto a network machine and then install user directories locally

Option 1: Install all Files onto a Network File Server

This option is typically done in preparation for local installations You simply copy all of the files and folders from the PRO/II CD-ROM to the network server This makes the install program accessible to users on the network who can then perform a local installation to their local hard drives

Option 2: Install Executables on a Network File Server and then Install User Directories Locally

This option is a two-part installation:

1 An installation of executables and their related files on the network

2 Installations of user directories on each user’s local disk drive using the PRO/II “New User” install procedure

The following sections guide you through network installation

Install Executable Files onto the Network File Server:

■ Begin the install process as previously stated on pages 2-1 and 2-2

■ Select the PRO/II Network installation procedure The

Welcome to InstallShield Wizard dialog box appears

■ nstalling SIMSCI Common Framework 1.0 and Installing SIMSCI Common Framework 2.0 dialog boxes appear

■ Then the Welcome to InstallShield Wizard dialog box appears

Click Next > to proceed

■ The License Agreement dialog box appears Click Yes to continue

shows the default destination directory (C:\SIMSCI) of the

Trang 27

PRO/II files To install to this folder, click Next > To install to a

■ The Select Features dialog box appears The Select Features

dialog box allows you to select the additional components you want to install The list box shows all possible components Check the components you want to install, uncheck the components you do not want to install, and note the change in required disk space Remember what you choose to install will become defaults during the “New User” install Click Next > to proceed

■ The Make Security Options for Newuser Install dialog box

appears Here you will select which security option will appear

as the default in the PRO/II “New User” install Select one of the four security options:

● If you chose FLEXlm7.2, FLEXlm9.5, or Token, specify one or more FLEXlm license servers from which PRO/II will obtain the license.Click Next > to continue

your settings If you want to review or change any settings click

machine to obtain licenses from another machine (FLEXlm9.5 security server machine) on the network for license(s)

Trang 28

included with your distribution package.

■ Click Finish to complete the installation

PRO/II Installed Directory Structure on a Network Drive (Typical)

When installing a network version, PRO/II will setup all of the files

on a network drive under the directories shown below.

where F:\ \ is the subdirectory on your network drive

Install User Directories Locally

The PRO/II New User install program installs PRO/II User directory and icons that are linked to the executable files on the network server Each user must execute the PRO/II New User install program from their machines

To install user directories locally:

■ Connect to the drive and directory to which you have installed the PRO/II Network Version

■ Locate the P2NEWUSER directory and run SETUP.EXE in this directory

■ Select the PRO/II Network installation procedure The

Welcome to InstallShield Wizard dialog box appears Click

Next > to proceed

shows the default destination directory (C:\SIMSCI) of the

F:\ \PROII81F:\ \PROII81\BINF:\ \PROII81\SYSTEM F:\ \PROII81\RESOURCEF:\ \PROII81\HLP

F:\ \PROII81\ManualF:\ \PROII81\ReportsF:\ \LIB

F:\ \P2NEWUSER

[Main PRO/II directory]

[Binary files, Provision version]

Trang 29

PRO/II files To install to this folder, click Next > To install to a

■ The Make Security Options for Newuser Install dialog box

appears Select one of the four security options:

● If you chose FLEXlm7.2, FLEXlm9.5, or Token, specify one or more FLEXlm license servers from which PRO/II will obtain the license.Click Next > to continue

your settings If you want to review or change any settings click

< Back If you are satisfied with the settings, click Next > to begin copying files

■ When your installation is complete, the Complete PRO/II Installation dialog box appears Select the View README.TXT File box to view the PRO/II 8.1 Release Notes, which is

included with your distribution package

■ Click Finish to complete the installation

After you have installed local directories for a user, setup returns you to the user’s desktop Newly installed program icons appear in the group you selected A typical installation produces eight icons:

Trang 30

● PRO/II 8.1

● PRO/II 8.1 Documentation

● PRO/II Re-Initialization Utility (PRU)

● OLI Chemistry Wizard 1.0

● LM ColumnTarget Interface

● PRO/II HTFS Interface

● SIM4ME Portal

● PRO/II HTRI Interface

You should now test your PRO/II installation Proceed to the

Testing PRO/II section.

Testing PRO/II

As a simple test of your PRO/II system, open PRO/II, import the input file G3 and run it This will let you utilize PRO/II’s flowsheet capability and give you a sense of how PRO/II will run

To test the PRO/II system:

➤ Click Start and select Programs/SIMSCI/PROII81/PROII 8.1

A Welcome to PRO/II screen appears which provides you with

basic information on the user interface

■ Click OK to continue

■ Select File/Import from the menu bar.

■ Select G3.INP in the Import Keyword File window and click

Open A window will appear showing the import of problem G3 PRO/II Main Window.

Note: Before you can run PRO/II, you must restart your computer Setup asks whether you want to restart the system now or later If you choose to restart the system later, be sure to restart it before you run PRO/II

Note: SIMSCI is the default directory and is used for illustrative purposes in the remainder of the chapter If you chose another directory (e.g., P2v81), use that directory name in place of SIMSCI

Trang 31

■ Click the Run button on the toolbar to begin calculations.

■ Click Run Simulation on the Flowsheet Status dialog box to

continue

Reviewing the Results

When the simulation is complete, a RUN COMPLETED message appears

in the G3 Solved window.

Generate an Output Report

To generate an output report for the sample problem:

■ Click the Output button on the toolbar to generate an output

file The stream and process unit results are shown in a window

■ Compare the results to those in the file G3.CHK, located in the

\SIMSCI\PROII81\USER directory.

Converting Files

This version of PRO/II automatically detects the old file version and runs the PRO/II converter for upgrades To convert simulation files:

■ Launch PRO/II with PROVISION™

■ When you do File/Open, enter the name of a file to be converted Click Open

■ The desired file will be converted to the new version PRO/II 8.1

Trang 32

Selecting the options (listed above) and clicking on the Change/

Remove button will give you the opportunity to remove or add components, repair or modify the PRO/II configuration, or even uninstall the whole product

Note: The order of uninstalling components and/or creating files under the PRO/II tree may cause certain single files to remain on the disk After uninstalling a component, check the corresponding installation directory for remaining files and delete them

manually

Trang 33

Chapter 3 Installing Acrobat Reader

PRO/II online documentation is provided in the form of PDF files that are conveniently viewed using Adobe Acrobat Reader 7.0.5 or Acrobat Exchange 7.0.5 You can install Acrobat Reader 7.0.5 directly from the PRO/II CD-ROM or the Adobe Systems website (www.adobe.com) If you are currently using Acrobat Reader 3.0, update your Acrobat Reader to version 7.0.5 from the installation CD

Installing Acrobat Reader

Adobe Acrobat Reader requires 5 MB of disk space for installation apart from the disk space required to install the PRO/II products These instructions assume that you are installing Adobe Acrobat from the PRO\II CD-ROM

To install Adobe Acrobat Reader:

■ From the PRO\II Installation CD under PROII81\PROII81LOCAL\SupportDir\ThirdPartyUtilities

choose Adobe Acrobat Reader 7.0.5.

■ Click Next > The Adobe Acrobat license agreement appears

■ Click Yes The Choose Destination Location dialog box

appears

■ If you want to change the destination directory, click Browse…

and specify the desired directory Otherwise, click Next >

Note: The online documentation files themselves remain on the CD-ROM

Trang 34

3-2 Installing Acrobat Reader

■ Setup starts copying files and displays a progress indicator

Click Cancel at any time to cancel the installation

Testing the Installation

To test the Acrobat Reader installation, open the Welcome.pdf file in the location C:\SIMSCI\PROII81\Manuals This file provides hypertext links to the various items of PRO/II documentation You can also access the SimSci-Esscor webpage from this screen

Figure 3-1: PRO/II 8.1 Welcome Screen

Uninstalling Acrobat Reader

To uninstall Adobe Acrobat Reader:

■ On the Windows desktop, select Start/Settings/Control Panel

■ Launch Add/Remove Programs.

■ Select Adobe Acrobat Reader 7.0.5 Remove Acrobat Reader

as you would any other Windows application

Version 8.1

Getting Started Guide Release Notes Keyword Manual Add-on Modules User Guide Application Briefs Manual Casebooks

Component Manual Thermodynamic Manual Interface Modules User Guide LIBMGR and COMPS User Guide Data Transfer System User Guide User-added Subroutines User Guide Quick Reference Card

Reference Manual User Guide COM Server Programmer Guide and Tutorial

COM Server Reference Guide TDM User Guide

SIM4ME Portal User Guide SIM4ME Reports User Guide

www.simsci-esscor.com

Trang 35

Chapter 4 Usage Reporting

This chapter explains how to install and run the Usage Reporting program available in PRO/II

Installing the Usage Reporting Program

Installation of the Usage Reporting program is optional You can install it with the product, or you can install it separately at a later time

To install Usage Reporting:

Follow the installation procedure under Installing a Standalone Version in Chapter 2, and do the following:

■ In the Installation Options dialog box, select Custom.

■ In the Select Features dialog box, select the Usage_Reporting

component and any other components you want to install

■ Type your company name in the Usage Reporting Option

dialog box when it appears

If you install the Usage Reporting program, PRO/II will look for the usage reporting file If you want to disable the Usage Reporting program, you must reinstall PRO/II using the default directory structure or the custom directory structure, leaving out the Usage Reporting option If your contract requires Usage Reporting, you will be notified by your local SimSci-Esscor sales office You will send the reports to SimSci-Esscor monthly

Trang 36

4-2 Usage Reporting

The Usage Reporting program monitors the use of SimSci-Esscor software on your computer Usage in terms of “charge units” are written to a Usage file containing the data shown below

Reports can be tailored to suit your needs by running the various sort options

This version allows you to choose (for PRO/II) to report either Charge Units or CPU data and, for all applications, to create an ASCII dump of the Usage data for use in database applications

When to Use the Usage Reporting Program

The Usage Reporting program should be run at the following times:

■ During Installation (optional for most users)—to create the

Usage and Backup files (if necessary) To test your program installation with Usage Reporting enabled, run a problem, and then run a Usage Report showing the run logged

■ Monthly for Usage Reporting customers—You have a

contractual agreement to generate a current monthly report for SimSci-Esscor at the end of each month for billing Retain a copy for your files

Date and time When the program was run

Project, User, Site Information from the problem input TITLE

statement

Account Login ID (not currently valid for PC)

Charge units Cost in charge units

CPU data for a run On a PC, this is elapsed time (PRO/II only)

Program informationProblem details

Note: Execution of the test problems (Benchmarks) supplied with your program is Usage - free We recognize these runs on your usage report, and you shall not be charged If you have a question concerning billing, please contact your

SimSci-Esscor representative

Trang 37

■ As needed for Internal Billing or Usage Monitoring (reports)—

Many users find the Usage Reporting program useful for internal monitoring of SimSci-Esscor program use By utilizing data written to the Usage file (standard report and ASCII file dump) from the input file TITLE statement, in conjunction with the sort/subtotal options, you can easily charge back usage to different departments and/or users

■ When the Usage File is Full—SimSci-Esscor programs will not

run if the Usage File is full (5000 runs) You must reinitialize the file

Running the Usage Reporting Program

The Usage Reporting program reports on all SimSci-Esscor

products Run the Usage Reporting program by selecting Usage Reporting under the Programs\SIMSCI menu.

Follow the instructions that appear on the screen

USAGE REPORT GENERATING PROCEDURE 1) Create usage file.

2) Reinitialize the usage file.

3) Report usage only.

4) Report usage from backup file only.

5) Dump contents of usage file.

6) Dump contents of backup file.

7) QUIT Please enter one of the above options.

USAGE directory:SIMSCI\USAGEProgram:USAGE.EXE USAGE file:USAGE.USGFile size:New: 1K, Full: 500K Report file:USAGE.RPTBackup file:USAGE.BCK REPORT OptionsSORT/SUBTOTAL Options 1) PROCESS6) INPLANT1) PROJECT 2) HEXTRAN7) INPLANT with statistics2) USER 3) INPLANT8) PRO/II (USAGE Units)3) ACCOUNT 4) VLE/REGRESS9) PRO/II (CPU Time)4) SITE 5) INPLANT10) ALL REPORTS

with statistics

Note: All directory paths shown in this manual are the installation defaults If you chose a different directory structure during your PRO/II installation, modify these instructions as required

Trang 38

4-4 Usage Reporting

Option 1 – Create USAGE File

Purpose: To create the Usage file.

■ Run the Usage Reporting program

■ Choose Option 1

■ Enter your company name

■ Verify your company name

■ Verify that the read/write file USAGE.USG has been created You cannot edit the Usage file without corrupting the file

If you choose Option 1 and the USAGE file already exists, the program will notify you, and then stop It will not harm the existing file

Option 2 – Reinitialize the USAGE File

Purpose: To reinitialize the USAGE file when it is full

(Reinitialization creates a backup file.) When the USAGE file is full, the following message appears:

PRO/II error message: *** ABORTING – Accounting file is full.

■ Run the Usage Reporting program

This keeps the data in the backup file from being lost

Option 3 – Report Usage Only

Purpose: To generate normal month-end billing reports, verify a

successful installation, and monitor internal billing or usage

➤ Run the Usage Reporting program

Trang 39

➤ If a report already exists (USAGE.RPT), indicate whether the program should overwrite it.

➤ Choose report options (1–10) Press <Enter> on a blank line

when you are finished selecting report options

Options 8 and 9 allow you to choose whether to report on Program Charge Units or CPU (elapsed time)

Option 10 generates a report for the entire content of the log file and does NOT allow you to choose a specific month or year

➤ Indicate whether you want a specific month for the report If so, enter the month as a 2-digit number (December=12)

➤ Indicate whether you want a specific year for the report If so, enter the year as a 2-digit number (2004=04)

➤ Indicate whether you want special sort options The default sort option, ACCOUNT, produces a “no sort” chronological report because the field contains no data

➤ If you have selected special sort options, choose the sort

options (1-4) you want Press <Enter> on a blank line when

you are finished selecting sort options

➤ The first field you enter is the primary sort key; the others are secondary keys

➤ Indicate whether the current report options are acceptable

➤ Indicate whether you want to change the default for program charge unit subtotaling By default, all secondary sort fields are subtotaled, which can be confusing

➤ If you have selected special sort options and you want to change the default for program charge unit subtotaling, choose

the subtotal option you want to exclude from the report

(Selecting NONE OF THEM produces NO subtotaling)

➤ Select the Usage Reporting report: <drive>:\SIMSCI\PROII81\USAGE\ USAGE.RPT.

Option 4 – Report from the Backup File

Purpose: The USAGE file has been inadvertently cleared, and the monthly report must be made from the backup file

Do not use this option unless specifically requested by

SimSci-Esscor personnel

Trang 40

■ Choose report options (1–10) Press <Enter> on a blank line

when you are finished selecting report options

Options 8 and 9 allow you to choose whether to report on Program Charge Units or CPU (elapsed time)

Option 10 generates a report for the entire content of the log file and will NOT allow you to choose a specific month or year

■ Indicate whether you want a specific month for the report If so, enter the month as a 2-digit number (December=12)

■ Indicate whether you want a specific year for the report If so, enter the year as a 2-digit number (2004=04)

■ Indicate whether you want special sort options The default sort option, ACCOUNT, produces a “no sort” chronological report because the field contains no data

■ If you have selected special sort options, choose the sort

options (1-4) you want Press <Enter> on a blank line when

you are finished selecting sort options

■ The first field you enter is the primary sort key; the others are secondary keys

■ Indicate whether the current report options are acceptable

■ Indicate whether you want to change the default for program charge unit subtotaling By default, all secondary sort fields are subtotaled, which can be confusing

■ If you have selected special sort options and you want to change the default for program charge unit subtotaling, choose the subtotal option you DO NOT want to include in the report (Selecting NONE OF THEM produces NO subtotaling)

■ Select the Usage Reporting report: <drive>:\SIMSCI\PROII81\USAGE\ USAGE.RPT

Định dạng
Số trang	139
Dung lượng	4,84 MB