NC drilling machine DNF II 1050 programing operation manual

PROGRAM1/EDIT SCREEN {PROGRAM 1 /EDIT SCREEN PROGRAM 1 | PROGRAM 2 [_verrica vise mo œuoc [{_OPERATION AUTO CYCLE START PROGRAM 1 /EDIT SCREEN Work programs, product programs and m

NC DRILLING MACHINE

PROGRAMING

2 PROGRAM(1)/EDIT SCREEN -~-~~~~~~~~~~~~eeeeeez~~z=~rzrrrrrmreerere=er

3, PROGRAM(1)/RUN SCREEN -~~~~~~>~>~>>~~>>~~~T>>>T~~eerrrrrrrrrrrrrreereeeeee

4 WORK PROGRAM EDIT SCREEN -~-~~~~~~~~~~~~>~=~~z=~z~rr~rrzr=rrrrreem meeer

5 PRODUCT PROGRAM EDIT SCREEN

3) PROGRAM (2) SCREENS -~-~~~~~~~=~z=~rrrrrrr=rrrrrrreerer re cere me me cơ nem

1 AUTO PROGRAM SCREEN 1

2 GROUP PROGRAM SCREEN 1

3 PROGRAM(2)RUN SCREEN -~ ~~-~~~~>~~~~~~~~~~z=~=ee=>~z~~zrrrrrrrrerrerreeeee 1

4 [AUTO PROGRAM/EDIT] SCREEN -~~~~~~~~~~~~=~~=~~~z~~~z~>>~rrrrrrrr=rr 1

5, [GROUP PROGRAM//EDIT] SCREEN -~~~~~~~~>~~~~~~z~~~=~z~z~z=rrrrrrrmrr 1 D90) 80) 0 - naaanaaanaaằaằannẵăaavuyaa 1 4) VERTICAL VISE DOG CHANGE SCREEN -~~~~~~~~~~~~~=~z~~~~~~z~~z~>r~rrrr=rre 1 5) LETTER ENTRY KEYBOARD -~~>~~~~~>~~~~~~~~z~~z=trrr~rrr~rrrrrerrenreereeermi 1 6) COMMON KEYS 0N EDIT SCRBEENS -~ -~~-~~~~~~~~z~~~~~~e=eerr~rrrrz=rrr=rrrrreerr 1 7) SPECIAL FUNCTION ON PROGRAM ENTRY -~ ~~~~~~~>~~~~==~~~~~z~~~z=~>r=rrrrrrr 2

1, MIRROR -~-~~ ~~~=~~z=~z=~rr=er~rr~rrrrrrrrrerrrrreeeeeeer me nem nen min cm 2

2 RET (RETURN) 2

4 DEL (DELETE) 2

5, PROGRAM UPDATE -~-~~~~~~~~~~~=e=ez=~>~z=~>rrrrrerreerrererrereeeree nen 2

[2 ]PATTERN SCREENS -~-~~~~~>~~~~>~T>>>zrrrrerrrrrrrrrrrrreerreree 2 1) [PATTERN//MENU] SCREEN -~ -~~-~~~~~~~~~~z~~~~~~~==er=e~rz=zrrrrrrrrreeeereee 2 2) F PATTERN SCREEN -~-~~~~~~~~~~~z=~~~~zr=r=rrrrrrrrrrrererrereeerreereenee ee 2 3) W PATTERN SCREEN 2 4) R PATTERN SCREEN ->~-~~~~~~~~~~z~~>e=~zrrrr=rrzrrrrr~rrrrrrereeee nem 3 5) MR PATTERN SCREEN -~~~~~~~~~>~~~z=e~~~=>>~r~~zrrrz=rrrrrrerrereeeerreereee 3 6) MW PATTERN SCREEN -~~~~~>~~~~~z~~~~>e~=T~~r~Trz=rrrrrrrrrrreereeeeeeeeiee 3 7) MC PATTERN SCREEN -~ ~~~~~=~~=z=>e~>~=~z=~rrrrzr~rrrr re re neeeeeeeeieeee 3 8) MCK PATTERN SCREEN -~-~-~~~~~~~~~~>~>~~~~ete~z~>z=~rrrrreererrrrrererrr 3 9) INCLINE DATA SCREEN -~-~~~~~~~~~~~>~=~~e=~~~z~~~=errrrrr=~zrreereenrreiremee 3 10) PATERN SPECIAL FUNCTIONS 3

2) INCLINED HOLES PROGRAM(WITHOUT FLANGE DRILLING) -~-~~=~~=~~~>~~~~~~~=~~ 3) INCLINBD H0LES PROGRAM(WITH FLANGE DRILLING) -~*~~~~~~~~~*~~z~~z~r~r~r~~ 4) PRGRAM( 1 )ENTRY PROCEDURE -~-~~~*>~~~~*T* TT TT TT TT TT TT cncs

1 PRODUCT PROGRAM ENTRY -~-~~~>>*>TTT TT TT TT TT TT TT Tr tr r£ <7 TTT7~T7

2 WORK PROGRAM ENTRV -~~~-~~~>~*T~T TT TT TT TT rr tr tr re r7

[4 ]MATERIAL DATA -~~~-~~~~>~>~~>>**>TTT*Ttrrrtrrrrrrrerrrrrrrrrrrrrrrrrrreered

1) MATERIAL DATA SCREEN Ặ

2) MATERIAL DATA CREATION/UPDATE -~ -~~~>>*>~~>2T>2>*> TT rtrrrrrrr ren 3) MATERIAL DATA GUIDELINE -~>>>>~~~>T*>~TtTTr~r~tnr tr rrrrrrerrrrrrrrrreer

1) PROGRAM SCREEN BREAKDOWN

The program screens comprises of [ PROGRAM 1

NO 1~48 NO 1~12 RANDOM PATTERN

MR} 1~80 MARKING RANDOM PATTERN

MARKING CUT PATTERN MARKING WELD PATTERN MERKING CUT INCLINE INCLINE DATA}10

2) PROGRAM(1 ) SCREEN

This menu shows a program list The menu is shown after the machine breaker is turned

on If another screen is shown, touch | PROGRAM | and | PROGRAM1 | to call up this

SELECTED PROGRAM No

eae ——- LEFT UNIT

No.} 0002

DIAGNOSIS 170 POSITION ALARM

(PROGRAM( 1 )/LIST SCREEN)

Programs edited by this machine or another PC is shown by this screen

A> Available program No.:1~4 8, Max 4 8 programs

[BUTTON FUNCTIONS]

UPDATE |: read USB stick to show as a program list

SAVE ‘ save programs shown on a program list screen to a USB stick

4> Insert a USB stick to the USB port

SELECT |: shows a selected program on PROGRAM(1)/LIST screen

[PROGRAM( 1 )RUN SCREEN] is shown

LOAD : reads programs from an outside PC

EDIT : [PROGRAM( 1 )/EDIT SCREEN] is shown.

2 PROGRAM(1)/EDIT SCREEN

{PROGRAM( 1 )/EDIT SCREEN)

PROGRAM (1) | PROGRAM (2) [_verrica vise mo œuoc [{_OPERATION

AUTO

CYCLE START

(PROGRAM( 1 )/EDIT SCREEN)

Work programs, product programs and material data is created/edited on this screen

@WORK PROGRAM : a drlling/feeding program is called a work program

4> In programing work programs, product programs and material data

are used

@PRODUCT PROGRAM : drilling data by a products

@MATERIAL DATA : work piece material data

4 To preset commonly used data is recommended

[BUTTON FUNCTIONS]

[WORK PROGRAM |: the screen shows a work program

[PRODUCT PROGRAM |: the screen shows a product program

[INCLINE DATA |: the screen shows material entry screen

[ EDIT |: [PROGRAM(1)/LIST SCREEN] is shown.

3 PROGRAM( 1 )/RUN SCREEN

A program selected at WORK PROGRAM/LIST screen program is

processed to RUN screen When this screen is shown, press AUTO START button to start

a cycle run To stop/restart a cycle run is also made by this screen

(THIS BUTTON IS SHOWN )

DOWN SCROLL BAR

SELECTED PROGRAM NO

A program selected on PROGRAM(1)/LIST screen is processed to be a run program

{BUTTON FUNCTIONS]

PROGRAM( 1 )/EDIT screen is shown

EDIT

EX RESTART :

RETURN :

; no£ used restart setting is made by this screen

RESTART | is shown in green when the setting is complete

goes back to PROGRAM(1)/LIST screen

4 WORK PROGRAM EDIT SCREEN

Touch | WORK PROGRAM | on PROGRAM(1)/EDIT screen

The creating/editing of q work program is available

LIST |: PROGRAM(1)/LIST screen is shown

MULT AC |: Nesting data is deleted

[WORK DATA AREA]

On touching, each entry field is shown:

@LENGTH : work length

@F END INC/ANG: a miter angle of work front end

INFEED II ZERO_RETURN ATC

@R.END INC/ANG: a miter angle of work rear end

4> gradient for left box; angle for right box

@MATERIAL 1

@ MATERIAL 2

@WEIGHT PER UNIT

@NUMBER OF MATERIAL : product program number in a work program

@CUTTING MACHINE : a cutting machine can be selected

@F BUTT LENGTH

@PRODUCT CLEARANCE : a distance between products

[NESTING DATA]

@MATERIAL:on touching, a material window opens to assign various parts

-F.BUTT: pastes a front butt

+ PRODUCT : pastes a product

-M BUTT : pastes an intermediate product

*R BUTT: pastes a rear product

» REMNANT : pastes a remnant product

@PRODUCT NUMBER : When [MATERIAL] is [PRODUCT] , an entry window opens to input product

program No

@<— : mirror setting; [—] for ordinary image and [<J] for mirror image

5 PRODUCT PROGRAM EDIT SCREEN

Touch | PRODUCT PROGRAM | on PROGRAM(1)/EDIT screen

A product program is created/edited on this screen

[PRODUCT DATA AREA)

ENTER MATERIAL DATA

OF A PRODUCT BLOCK | FIX

| MALT AC PROGRAM MANUAL

PARAVETER | DIAGNOSIS 170 ALARM

TOOL POSITION

[BUTTON FUNCTIONS]

LIST |: PROGRAM(1)/LIST screen is shown

MULTA C |: product data is deleted

[MATERIAL DATA AREA]

On touching, each entry field is shown:

@ LENGTH : work length

@F.END INC/ANG : a miter angle of work front end

4e gradient for left box; angle for right box

@R END INC/ANG: a miter angle of work rear end

A> gradient for left box;, angle for right box

[DRILLING DATA AREA]

@BLOCK:0n touching, block window is shown

- DRILLING : On touching, drilling block window is shown to enter drilling

@UNIT : the drilling patterns (top, left, right) designated at drilling block/scribing

block window are shown

The program(2)screen comprises of 3 screens: [ AUTO PROGRAM |, [ GROUP PROGRAM |, [ PATTERN |

[AUTO PROGRAM) 9010 PROGR

Em NH0 vien 0u The auto program is for the drilling with

ae SSS EE automatic feed

an "nà Em 4p preset patterns are used for the programing

4 See <P37> of this manual

wam |Ï us || sẽ |a[sm]| se: T

[GR0UP PROGRAM] @CROUP PROGRAM

RENEE wien The group program is for the drilling with manual

ACHE toon da

= re 5000.00 feed (available stroke: 550mm)

4p preset patterns are used for the programing

4 See <P37> of this manual

eee

Line | 4p See <P25> of this manual

2012/05/20 10:20

1 AUTO PROGRAM SCREEN

When [ PROGRAM2 | screen is shown, touch | AUTO PROGRAM |

PARAMETER | DIAGNOSIS POSITION ALARM

CAUTO PROGRAM/LIST SCREEN)

Programs edited by this machine or another PC is shown by this screen

Ap Available program No.:1~4 8, Max 4 8 programs

10

-2 GROUP PROGRAM SCREENS

When | PROGRAM2 | screen is shown, touch | GROUP PRORAM |

PROGRAM (1) PROGRAM (2) VERTICLA VISE DOG CHANGE OPERATION

‘AUTO PROGRAM GROUP PROGRAM PATER UP SCROLL BUTTON

NO PROGRAM NAVE: SHAPE PLOFILE LENGTH "AUTO

OK

SELECTED PROGRAM = TR ROLL BAR

SHOWN IN AQUA NOH_INFEEDING ZERO RETURN

| PROGRAM MANUAL TOOL PARAMETER | DIAGNOSIS 170

(GROUP PROGRAM/LIST SCREEN]

Programs edited by this machine or another PC is shown by this screen

4e Available program No.:1~1 2, Max 1 2 programs

{BUTTON FUNCTIONS)

UPDATE |: read USB stick to show as a program list

SAVE : save programs shown on a program list screen to a USB stick

4p Insert a USB stick to the USB port

SELECT |: shows a selected program on PROGRAM( 2 )/LIST screen

PROGRAM ( 2 )RUN SCREEN is shown

LOAD : reads programs from an outside PC

-ll-3 PROGRAM( 2 )RUN SCREEN

A program selected at AUTO PROGRAM/LIST screen or GROUP PROGRAM/LIST program is processed to RUN screen When this screen is shown, press AUTO START button to start

a cycle run To stop/restart a cycle run is also made by this screen

PROGRAM (1) procnl (2) | warlcA vise nog crwnoe OPERATION

RUNNING STEP `\ ng L nang: ed ——=4 —UP SCROLL BUTTON

jas COMBLETEỶ ae, ee | _ ex A SELECTED PROGRAM No IS SHOWN

| EDIT 7 RETURN | MP KIÊN -

| PROGRAM | MANUAL | TOOL | nem | DI4EMSIS | 170 | POSITION ALARM

RESTART : The restart screen is shown to accept data entry

When the entry is complete, RESTART | is shown in green

RETURN ‘ goes back to PROGRAM/LIST screen

-12-4 AUTO PROGRAM/EDIT SCREEN

This screen is to create/update a auto program

PROGRAM (1) PROGRAM (2 ) VERTICAL VISE DOG CHANGE f{_OPERATION |

‘AUTO PROGRAM GROUP_ PROGRAM PATTERN 0

STEP] LENGTH | LFLANGE| WB | R.FRANGE] —— | |

1 | DRILL CANG| 62.0 | 622.0 | 622.0 NAVE 1234567890 [WORK DATA AREA]

| SHAPE BEAM WORK DATA FOR THE

7 OOF Reg | Rey Re Set Lencm 500.0 m {10| AUTO PROGRAM

THE AUTO PROGRAM = KEI c | s [m⁄m me | ew] mw | mc

[aay PO LERT WNIT

help | BN || SW | v0, o0ot | RETURN ng 5

| PRocrAM | MANUAL [ Tool | PARAMETER | DIABROSIS | 170 | POSITION

[WORK DATA AREA]

The work data is as follows:

@LENGTH : total length of a workpiece

WIDTH : web width

@HEIGHT : flange height

cl SS/SS_}-»[_SM/SM _|—»[_SS/SM }-»[_SM/SS_}-»[ SN/SN F]

@KERF : kerf length of the saw applied

X TOTAL : total length of a program including kerfs

[DRILLING DATA AREA]

@STEP :step NO

4 The max step is 252, but only 1 2 steps can be shown

@LENGTH : relative distance to the pattern

4> drill type and diamter for for STEP 1

@L FLANGE : pattern type/number for left unit

OVER : pattern type/number for top unit

@R FLANGE : pattern type/number for right unit

@<— (MIRRR) : On touching | CHANGE | the arrow direction alternates

— without mirror + with mirror

+ 118 =

5 GROUP PROGRAM/EDIT SCREEN

This screen is to create/update a group program

STEP] 1 DRILL CHANGE} 622.0 LENGTH | L.FLANGE| WEB | R.FLANGE| > | & 622.0 622.0 a Hae ORK DATA FOR THE [WORK DATA AREA]

2 oo} Ft} wt] koa] yous GROUP PROGRAM

DRILLING DATA FOR) lạul 7 [7s luznlfa [an [a¿vlww [ve IỆ mig

THE GROUP PROGRAN JLe J_s jn] | a | ma | 1| mw | wc | Ẩm

kế ` ESSA EIT Mes Wo RN ae f wee EFT LEFT UNIT _) =

SAVE No.| 0001 || RETURN UPON

The work data is as follows:

@X STROKE : A group program length cannot exceed X stroke

@WIDTH : web width

@HEIGHT : flange height

@KERF : kerf length of the saw applied

X TOTAL : total length of a program including kerfs

[DRILLING DATA AREA]

@STEP :step NO

4> The max step is 252, but only 1 2 steps can be shown

t relative distance to the pattern 4p drill type and diamter for for STEP 1

@L FLANGE : pattern type/number for left unit

WEB ! pattern type/number for top unit

@R FLANGE : pattern’ type/number for right unit

@<— (MIRRR) : On touching the arrow direction alternates

— without mirror + with mirror

@ LENGTH

- 14 -

PROGRAM (1) PROGRAM (2) VERTICAL VISE DOG CHANGE OPERATION

‘AUTO PROGRAM GROUP PROGRAM PATTERN i =

AUTO

x ae y paces CYOLE START

| Độ 1~250 MR ki WORK FEED QUEUE —

NOW INFEEDING

TOUCHED SWITCH = SS EHO DET UA

SHOWN IN GREEN | Welt es Ri WARM UP ;

| Progra | MANUAL | T00L | PARAMEER | DIAGNOSIS | 170 | PosiTioN | ALARM

(PATTERN LIST SCREEN)

This screen is to create/update patterns and incline data

4— The patterns and incline data have respective ceilings <P34>

{BUTTON FUNCTION]

E_ 1~250 |: FLANGE PATTERNS; enter a pattern number(1 ~ 2 5 0) and touch

to call up the corresponding edit screen

W_1~25 0 |: WEB PATTERNS; enter a pattern number(1 ~ 2 50) and touch

to call up the corresponding edit screen

R 1~1 6 0_|: RANDOM PATTERNS; enter a pattern number(1 ~ 160) and touch

to call up the corresponding edit screen

INCLINE DATA |: INCLINE DATA; touch to call up the corresponding edit screen

- 15

-MR_1~80

MW

MC

MC K

: RANDOM PATTERNS; enter a pattern number(1 ~ 8 0) and touch

to call up the corresponding edit screen

: MARKING WELDING PATTERN; touch to call up the corresponding

4) VERTICAL VISE D0G CHANGE SCREEN

Touch [PROGRAM | and [ VERTICAL VISE DOG CHANGE |, this screen is shown

PROGRAM (1) | PROGRAM ( 2) [[ VERTICAL Vise 006 cance OPERATION

2nd

AUTO CYCLE START AUTO OK

| PROGRAM, | MANUAL | TOOL | mawem | neaœis | 170 | POSITION ALARM

(VERTICAL DOG CHANGE SCREEN)

The status of the vertical vise dog (vertical dog) is shown

{BUTTON FUNCTION]

@VERTICAL DOG

The status of the vertical dog is changed

[_UP_]: touch when the dog is up

DOWN }: touch when the dog is down

4 touch either switch to light up after replacing the vertical dog FEED POS.SETTING |: The present feed position is updated by the entered data

2 fT

5) LETTER ENTRY KEYBOARD

When an unreserved program number is selected on either AUTO PROGRAM/LIST screen or GROUP PROGRAM/LIST screen, the keyboard is shown

[CLOSE |: stop entry to go back to the list

CLOSE THE WINDOW screen

(ENTRY OPERATION)

(1)Touch a letter or a sign

—— ——====== 4p The neumeric key is also available

¢ mm 208/17] ») (2)To change entered data, touch to

j delete the last letter of the entry field

(3 )Touch key to save the entry data

(4)When a program name is saved, the corresponding edit screen is shown

- 18 -

6) COMMON KEYS ON EDIT SCREENS

As illustrated, common keys are shown

on edit screens of both auto/group

programs

For data entry, use these keys

¡ mơ |[ aw | swe vo[ ooo] rene

pence | MANUAL | TOOL [em [ seess | 1⁄0 Em 2012/05/20

10:20

RET] {RETURN KEY RETURN COMMAND IS SET

pat] DRILL CHANGE KEY DRILL CHANGE COMMAND IS SET

CARBIDE DRILL KEY [CJ IS SET FOR DRILL TYPE

REAR MARKING WELDING KEY

lš [RMW] I§ SET F0R DRILLIN DATA

HELP KEY HELP WINDOW IS OPENED

RUN KEY RUN SCREEN IS OPEND

SAVW| |SAVE KEY EDITIN PROGRAM IS SAVED

4p RETURN | GOES BACK TO THE PREVIOUS SCREEN

= (9)

7) SPECIAL FUNCTION ON PROGRAM ENTRY

'DRILLING DIRECTION DRILLING DIRECTION

like a mirror 'o00 ooo!

| WITHOUT MIRROR WITH MIRROR |

PATTERN TYPE APPLICATION

care ZERO POSITION LINE SYMMETRY

O: ORIGINAL PATTERN, @:MIRROR IMAGE PATTERN

If a drill pattern is skewed, ponit symmetry is applied

- 20 -

2 RE T (RETURN)

By using RE Tcommand, repeated nesting is coded easily

4- RE Tcommand can be used for auto programs only

(4)After above entry, the program is prosessed STEP] LENGTH {L FLANGE] WEB |R.FLANGH <—>

(5)For product ®, enter data as shown at STEP] LENGTH |L.FLANGE| WEB |R.FLANGH <—>

1Ì ssp |0240 |024.0 | cad.o STEP9~11 2 20.0 NC MC NC

3 oof rife afro | =>

|

(7 )For # SN” enter returning STEP NO STEP] LENGTH [L.FLANGE] WEB |R.FLANGH <—>

1] ssp | c24.0 | G24.0 | cad.o

touch L9] Lin} 2 20.0 MC MC MC

nee 3 oofroifm oifro1i |

For “fal” , enter repetition; touch [IN ] 4| 800.0] MC MC wc

5 oofroiafmoiafroa {—

Je The shown default is [1] 6| 7 300.0| 00|r£ Nc lỊU lịr | Nc Mc —

8 800.0 NC NC MC

9 00|F lữ lịr lì | — 10| 50000 |F 1t lịt l|<—

: i 0.0 | “HC NC MC

12 oo;roi1]w¥adyreoul— 13| 50000 |rF 1|W lịỊt l|Ị<—

* RET COMMAND ONLY ACCEPTS PREVIOUS STEPS

* RET COMMAND STEP IS NOT ACCEPTED AS A RETURNING STEP

+ THE RETURNING STEP MUST HAVE DATA

- 22 -

3ã

4

| N S (INSERT)

To increase steps, INS function is available

4 Both auto/group programs available

(INSERT PROCEDURE)

(1)Set the cursor to the step to insert a line;

touch [INS ]

4 The cursor can be anywhere within the step

(2)Enter LENGTH to make the inserted line valid

Je DRILL/RET command can be inserted

D E L (DELETE)

To delete a step, use this function

4 Both auto/group programs available

(DELETE PROCEDURE)

(1)Set the cursor to the step to delete; touch [DEL |

4 The cursor can be anywhere within the step

(2)Touch [IN] to delete the step

- 23 -

STEP] LENGTH JL FLANGE WEB |R.FLAXo{ —>

9| 5000.0) wc we we 19) oof Foifwoapro rps

" 12

STEP] LENGTH [L.FLANGE] WEB |R.FLAXGỈ ©—>

1 sp | c2s.o] cat.o | caso

2 10.0| we we we

3 00 F_ 1] clịỊP cỊ T2 4| 300.0J "uc we we

5 PROGRAM UPDATE

ENTERED PROGRAMS CAN BE UPDATED FREELY

(UPDATE PROCEDURE]

(1)Call up a program to update; set cursor to updating position

with E][>]LT ILL]

(2)Update the data INS/DEL function is also available

(3)When update is complete, touch [IN] to save the data

4> Both auto/group programs available

6 PROGRAM DELETION

To delete whole programs, go to MEMORY/CLEAR screen

@ Once a program is deteted, there is no way to restore

@ One-by-one program deletion cannot be prohibited by the parameter

(PROGRAM DELETION PROCEDURE)

(1)Call up a program to detete

(2) Touch [IN] to delete the displayed program

4 Both auto/group programs available

- 24 -

1) PATTERN/MENU SCREEN

Touch | PROGRAM 2 PATTERN | to call up PATTERN/MENU screen

4 If another screen is shown, touch a couple of time to call up this screen

PROGRAM (1) PROGRAM (2) VERTICAL VISE DOG CHANGE OPERATION

‘AUTO PROGRAM GRUP POGRAM ‘PATTERN ` Ze

‘AUTO

pe A07 CYCLE START !

F 1~250 3 MR 1 $0 WORK FEED QUEUE TU

W 1~250 MW

R 1~160 MC

INCLINE DATA MCK

2012/05/20 10:20 iS

| PROGRAM | MANUAL | TOOL | mmuema | pueamis | 170 | POSITION

Touch the menu key, enter a pattern number and touch LIN]

A flange pattern entry screen is shown

W_1~250

Touch the menu key, enter a pattern number and touch LIN]

A web pattern entry screen is shown

R I~160

Touch the menu key, enter a pattern number and touch [IN]

A random pattern entry screen is shown

INCLINE DATA

Touch the menu key and touch LIN] The incline data screen is shown

MR 1~80

Touch the menu key, enter a pattern number and touch [in]

A marking random pattern entry screen is shown

-2) F PATTERN SCREEN

1 PATTERN TYPE SELECTION

Select a pattern type

?#® When a saved number is entered, the edit screen is shown directly

% Touch key to go back to PATTERN/MENU screen

‘AUTO PROGRAM GROUP PROGRAM 7 PATTERN

chó ee te ieee eee aera pee SR SAS ero | 11:20 SE

Proc | wou | roo [meaereloiemss|_ +ựo [rarld| xxw

2 2 PARALLELS SCREEN

PROGRAM (1) PROGRAM (2) VERICAL VISE DOG CHANGE (ENTRY DATA)

AUTO PROGRAM PROGRAM

ere ĩ ae _ XP : HOLE PITCH(X)

(CYCLE START_J XN _ : HOLE ARRAY

FLANGE 2 PARALLELS = tp Tại TK J: HOLE PITCH(Y)

OOO Ore Ĩ xw 0 Cr] TH OS : OFFSET

i; -}—22 ol cae SK 1 : SKEW DATA

[| SEE [2]9) SKEW DATA