1. Trang chủ
  2. » Giáo Dục - Đào Tạo

Fabric & Garments Fault with its remedies

43 253 0

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Định dạng
Số trang 43
Dung lượng 2,55 MB

Các công cụ chuyển đổi và chỉnh sửa cho tài liệu này

Nội dung

Fabric & Garments Fault with its remedies... Unfused edge• High temperature produced during cutting can fuse fabric edges by melting... Sewing FaultsMainly there are three types of Sewin

Trang 1

Fabric & Garments Fault with its remedies

Trang 2

Prepared By : Mazadul Hasan sheshir ID: 2010000400008

13th Batch (session 2009-2013) Department : Wet Processing Technology Email: mazadulhasan@yahoo.com

Blog : www Textilelab.blogspot.com (visit)

Southeast University

Department Of Textile Engineering I/A 251,252 Tejgaon Dhaka Banglade sh

Prepared By :

Trang 3

Total Textile Process at a Glance

Trang 10

Causes:

• Patta is creating by Machine parts fault  Picture:  

 Patta Remedies:

Note: After Fabrications Patta can’t remove any process

Trang 12

Batch to Batch Shade Variation:

Trang 17

Unfused edge

• High temperature produced during cutting can fuse fabric edges by melting.  

Trang 19

Cause:

Trang 23

Sewing Faults

Mainly there are three types of Sewing Faults

1) Defects due to problem of stitch formation.

2) Defects due to fabric distortion.

3) Seam puckering.

Trang 24

problem of stitch formation

Trang 26

Name of garment defects/ Faults:

Trang 28

Different shades within the same garment:

Trang 31

Garments Finishing Faults:

Garments Finishing Faults:

Unwanted marks on fabric

Decolorized patch on fabric

Trang 32

Unwanted marks on fabric: Unwanted marks on fabric:

Trang 33

Pin holes:

Causes: 

• Holes along selvage caused by pins holding fabric while it processes through tenter frame

• Major defect if pin holes extend into body of fabric far enough to be visible in the finished product

Trang 35

• Steam iron is used.

• Better quality yarn shrinkage problem reduce

Trang 36

Dirty sport:

• Dirt, Dust & other impurities is the cause the dirty sport.   

Trang 37

Iron spot

Causes:

If the Iron surface is dirt then this iron used become iron spot problem.Picture:            

Trang 39

Recommendation:

Trang 40

We have done project work is very carefully with successfully. Our Industry Every person is very helpful & Positive attitude. We found the Fabric & Garments fault with its remedies 

in every division. This project work is very essential in our job life. 

Ngày đăng: 11/08/2015, 00:05

TỪ KHÓA LIÊN QUAN