Bibliography 399, A.: n.d., Standard Test Method for Plane Strain Fracture Toughness of Metallic Materials, E399–74, Annual Book of ASTM Standards.. Anon.: 1985, RILEM Draft Recommendati
Trang 1Bibliography
399, A.: n.d., Standard Test Method for Plane Strain Fracture Toughness of Metallic Materials, E399–74,
Annual Book of ASTM Standards
Anon.: 1985, RILEM Draft Recommendation (50–FCM): Determination of the Fracture Energy of
Mortar and Concrete by Means of Three–Point Bend Tests on Notched Beams, Materials and
Structures 18, 287–290.
Baˇzant, Z.: 1996, Is no tension design of concrete or rock structures always safe?-fracture analysis, ASCE
J of Structural Engineering 122(1), 2–10.
Baˇzant, Z and Prat, P.: 1988, Effect of temperature and humidity on fracture energy of concrete, ACI
Materials Journal 85(4), 262–271.
British Standards Institution, BS 5447, London: 1977.
Broek, D.: 1986, Elementary Engineering Fracture Mechanics, 4th Edition, Martinus Nijhoff Publishers.
Carol, I., Baˇzant, Z.P and Prat, P.C.,: 1992, Microplane type constitutive models for distributed damage
and localized cracking in concrete structures, Proc Fracture Mechanics of Concrete Structures,
Elsevier, Breckenridge, CO, pp 299–304
Chen, W and Zhang, H.: 1990, Structural Plasticity, Springer-Verlag.
Cherepanov, G.: 1979, Mechanics of Brittle Fracture, McGraw-Hill.
Erdogan, F and Sih, G.C.: 1963, On the crack extension in plates under plane loading and transverse
shear, Journal of Basic Engineering 85, 519–527.
Foreman, R., Kearney, V and Engle, R.: 1967, Numerical analysis of crack propagation in cyclic-loaded
structures, J of Basic Engineering 89, 459–464.
Gdoutos, E.: 1993, Fracture Mechanics; An Introduction, Kluwer Academic Press.
Griffith, A.: 1921, The phenomena of rupture and flow in solids, Phil Trans Roy Soc London
A221, 163–197.
Hodge, P.: 1959, Plastic Analysis of Structures, McGraw-Hill Book Company, New York.
Hudson, C and Seward, S.: 1978, A Compendium of Sources of Fracture Toughness and Fatigue Crack
Growth Data for Metallic alloys, Vol 14, Int J of Fracture.
Hudson, C and Seward, S.: 1982, A compendium of sources of fracture toughness and fatigue crack
growth data for metallic alloys, Int J of Fracture, Part II 20, R59–R117.
Hussain, M., Pu, S and Underwood, J.: 1974, Strain energy release rate for a crack under combined
mode i and mode ii, ASTM, STP 560 pp 2–28.
Irwin, G.: 1957, Analysis of stresses and strains near the end of a crack traversing a plate, Transactions
ASME, J Appl Mech.
Trang 2Draft2 BIBLIOGRAPHY
Irwin, G.: 1962, The crack extension force for a part through crack in a plate, Transactions ASME, J.
Appl Mech.
Kelly, A.: 1974, Strong Solids, second edn, Oxford University Press.
Miller, M and Gallagher, J.: 1981, An analysis of several fatigue crack growth rate (fcgr) descriptions, in
S Hudak Jr and R Bucci (eds), Fatigue Crack Growth Measurements and Data Analysis, ASTM
STP 738, ASTM, Philadelphia, pp 205–251.
Mostovoy, e a.: 1967, Use of crack-line loaded specimens for measuring plane strain fracture toughness,
J of Materials 2(3), 661–681.
Murakami, Y.: 1987, Stress Intensity Factors Handbook, Pergamon Press (2 Vols).
Newman, J.: 1971, An improved method of collocation for the stress analysis of cracked plates with
various shaped boundaries, Technical Report NASA TN D-6376, National Aeronautics and Space
Administration, Langley Research Center, Hampton, VA
Newman, J and Raju, I.: 1981, An emperical stress intensity factor equation for surface cracks,
Engi-neering Fracture Mechanics 15, 185–192.
Ortiz, M and Popov, E.: 1985, Accuracy and stability of integration algorithms for elastoplastic
consti-tutive relations, Int J Num Meth Eng 21, 1561–1576.
Ouchterlony, F.: 1982, Fracture toughness testing of rock, Technical report, SveDeFo, Swedish Detonic
Research Foundation, Stockholm, Sweden
Ouchterlony, F.: 1986, Suggested methods for determining fracture toughness of rock material, Technical
report, International Society for Rock Mechanics, Commission on Testing Methods.
Paris, P and Erdogan, F.: 1963, A critical analysis of crack propagation laws, J of Basic Engineering,
ASME.
Rooke, D and Cartwright, D.: 1976, Compendium of Stress Intensity Factors, HMSO, London.
Sih, G., Paris, P and Irwin, G.: 1965, On cracks in rectilinearly anisotropic bodies, International Journal
of Fracture Mechanics.
Tada, H., Paris, P and Irwin, G.: 1973, The Stress Analysis of Cracks Handbook, Del Research
Corpo-ration, Hellertown, PA
Walker, E.: 1970, The effect of stress ratio during crack propagation and fatigue for 2024-t3 and 7075-t6
aluminum, in M Rosenfeld (ed.), Effects of Environment and Complex Load History on Fatigue
Life, ASTM STP 462.
Westergaard, H.: 1939, Bearing pressures and cracks, J Appl Mech.
Wheeler, O.: 1972, Spectrum loading and crack growth, J of Basic Engineering 94, 181–186.
Willenborg, J., Engle, R and Wood, R.: 1971, A crack growth retardation model using an effective stress
concept, Technical report, Air Force Flight Dynamics Laboratory Report, AFFDL-TM-71-1-FBR.
Victor Saouma Mechanics of Materials II