1. Trang chủ
  2. » Kỹ Thuật - Công Nghệ

Volume 21 - Composites Part 13 ppsx

160 187 0

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Định dạng
Số trang 160
Dung lượng 3,97 MB

Các công cụ chuyển đổi và chỉnh sửa cho tài liệu này

Nội dung

Military Handbook 17A,SAMPE J., Composite Materials: Testing and Design Second Conference, SAMPE J., SAMPE J., Properties and Performance of Polymer-Matrix Composites Composites Enginee

Trang 5

μ

Trang 10

μ

Trang 15

μ

Trang 18

Modern Plastics Encyclopedia

Mater Eng

Mach Des.,

Military Handbook 17A

Trang 19

J Compos Mater.,

1970 Guide to Plastics, Modern Plastics Encyclopedia

Handbook of Fiberglass and Advanced Plastics Composites,

Military Handbook 17, Plastics for Flight Vehicles,

Composite Materials,

Trang 20

Composite Materials: Testing and Design (Third Conference),

Composite Materials,

J Aircr

Advanced Composites Design Guide,

Composite Materials: Testing and Design (Third Conference),

Trang 21

Military Handbook 17A,

SAMPE J.,

Composite Materials: Testing and Design (Second Conference),

SAMPE J.,

SAMPE J.,

Properties and Performance of Polymer-Matrix Composites

Composites Engineered Materials Handbook

Materials Selection and Design ASM Handbook

Properties and Performance of Polymer-Matrix Composites

Modern Plastics Encyclopedia

Trang 22

Plast Des Forum,

Design Handbook,

Mach Des.

Mater Eng The International Plastics Selector, Extruding and Molding Guides, Dest Top Data Bank,

Modern Plastics Encyclopedia,

Encyclopedia/Handbook of Materials, Parts and Finishes

Trang 23

Handbook of Fiberglass and Advanced Plastics Composites,

Military Handbook 17, Plastics for Flight Vehicles,

Composite Materials,

Trang 24

Composite Materials: Testing and Design (Third Conference),

Composite Materials,

J Aircr

Advanced Composites Design Guide,

Composite Materials: Testing and Design (Third Conference),

Trang 25

Military Handbook 17A,

SAMPE J.,

Composite Materials: Testing and Design (Second Conference),

SAMPE J.,

SAMPE J.,

Trang 27

An Introduction to Metal Matrix Composites,

Properties, Nondestructive Testing, and Repair, Composite Materials,

Fundamentals of Metal Matrix Composites,

Prog Mater Sci.,

Properties of Metal-Matrix Composites

David E Alman, U.S Department of Energy, Albany Research Center

Trang 34

σ σ

σσ

Trang 36

xxx xxx xxx

Trang 39

τ

Trang 40

μ

Trang 41

ΔK ΔK

ΔK

Trang 43

ΔK

Trang 47

μμμμ

Trang 50

S N

Trang 52

An Introduction to Metal Matrix Composites,

Properties, Nondestructive Testing, and Repair, Composite Materials,

Fundamentals of Metal Matrix Composites,

Ceramics and Glasses, Engineered Materials Handbook,

ART-Handbook of Advanced Ceramic Materials,

ASM Specialty Handbook: Aluminum and Aluminum Alloys,

Metal Matrix Composites, Processing and Interfaces,

Processing, Properties, and Applications of Cast Metal Matrix Composites,

Mater Edge,

Processing, Properties, and Applications of Cast Metal Matrix Composites,

Processing, Properties, and Applications of Cast Metal Matrix Composites,

Trang 53

Scr Metall., Processing, Properties, and Applications of Cast Metal Matrix Composites, Processing, Properties, and Applications of Cast Metal Matrix Composites,

Acta Metall., Fundamentals of Metal Matrix Composites,

Mater Sci Eng A, Mater Sci Eng A,

Mater Sci Eng A, Metall Mater Trans A,

Metall Mater Trans A,

Mater Sci Eng A, Acta Mater.,

Scr Met Mater.,

Fundamentals of Metal Matrix Composites,

Fatigue and Fracture, ASM Handbook,

Aluminum and Magnesium for Automotive Applications,

Mater Sci Eng A,

Acta Metall Mater.,

J Mater Sci.,

Metall Trans., Metall Trans.,

Acta Metall., Acta Metall., Metall Trans.,

Compos Sci Technol., Int Mater Rev.,

Wear,

Metall Trans.,

Int Mater Rev., Mater Sci Eng A, Mater Sci Eng A,

J Mater Sci.,

Titanium'95 Science and Technology, Composites Part A,

Trang 54

Titanium'95 Science and Technology,

Titanium'95 Science and Technology,

Mater Sci Eng A, Mater Sci Eng A,

Mater Sci Eng A,

Titanium'95 Science and Technology,

Scr Met Mater., Gamma Titanium Aluminides, 1999,

High Temperature High Performance Composites,

Scr Metall Mater., Int J Powder Metall.,

J Mater Sci., Lett.,

Gamma Titanium Aluminides, 1999, Physical Metallurgy and Processing of Intermetallic Compounds, Gamma Titanium Aluminides, 1999,

Wear, Mater Sci Eng A,

Intermetallic Matrix Composites II,

Properties of Metal-Matrix Composites

David E Alman, U.S Department of Energy, Albany Research Center

Trang 56

K K

Trang 57

Trang 58

Int Mater Rev., Metall Trans A,

Metall Trans A, Metall Trans A,

Metall Trans A,

Mater Sci Eng A, Mater Sci Eng A, Scr Metall Mater.,

Mater Sci Eng A,

Metall Trans A, Metall Mater Trans A, High Temperature Silicides and Refractory Alloys,

High Temperature Ordered Intermetallic Alloys VII,

Fatigue and Fracture, ASM Handbook,

J Adhes.,

Trang 59

Properties of Metal-Matrix Composites

David E Alman, U.S Department of Energy, Albany Research Center

α

Trang 60

x y z

Trang 66

t t

Trang 67

Aσ n t σ E σ E E E E

R

Trang 68

An Introduction to Metal Matrix Composites,

Trang 69

Properties, Nondestructive Testing, and Repair, Composite Materials,

Fundamentals of Metal Matrix Composites,

Metal Matrix Composites, Processing and Interfaces,

Int Mater Rev., Mater Sci Eng.,

Structural Intermetallics, Superalloys and Supercomposites and Superceramics,

Titanium'95 Science and Technology,

Metall Trans A, Intermetallic Matrix Composites III,

Metall Mater Trans A, Composite Materials Handbook,

Composite Materials: Fatigue and Fracture,

Mater Sci Eng A,

Mater Sci Eng A, Life Prediction Methodology for Titanium Matrix Composites,

Metall Trans A, Mater Sci Eng A, Life Prediction Methodology for Titanium Matrix Composites,

Mater Sci Eng A, Metall Mater Trans A,

Fatigue and Fracture, ASM Handbook,

Life Prediction Methodology for Titanium Matrix Composites,

Metal Matrix Composites: Testing, Analysis and Failure Modes, Mater Sci Eng A,

Titanium'95 Science and Technology, Composite Materials: Fatigue and Fracture, Composite Materials: Fatigue and Fracture,

Mater Sci Eng A,

Mater Sci Eng A,

Trang 70

Mater Sci Eng A,

Mater Sci Eng.,

Mater Sci Eng A, Mater Sci Eng A,

Mater Sci Eng A,

Mater Sci Eng A, Mater Sci Eng A,

Mater Sci Eng A, Mater Sci Eng A, Mater Sci Eng A,

Properties of Metal-Matrix Composites

David E Alman, U.S Department of Energy, Albany Research Center

Properties of Metal-Matrix Composites

David E Alman, U.S Department of Energy, Albany Research Center

An Introduction to Metal Matrix Composites, Properties, Nondestructive Testing, and Repair, Composite Materials,

Fundamentals of Metal Matrix Composites, Prog Mater Sci.,

Ceramics and Glasses, Engineered Materials Handbook,

ART-Handbook of Advanced Ceramic Materials,

ASM Specialty Handbook: Aluminum and Aluminum Alloys,

Metal Matrix Composites, Processing and Interfaces,

Processing, Properties, and Applications of Cast Metal Matrix Composites,

Mater Edge,

Processing, Properties, and Applications of Cast Metal Matrix Composites,

Trang 71

Processing, Properties, and Applications of Cast Metal Matrix Composites,

Scr Metall., Processing, Properties, and Applications of Cast Metal Matrix Composites, Processing, Properties, and Applications of Cast Metal Matrix Composites,

Acta Metall., Fundamentals of Metal Matrix Composites,

Mater Sci Eng A, Mater Sci Eng A,

Mater Sci Eng A, Metall Mater Trans A,

Metall Mater Trans A,

Mater Sci Eng A, Acta Mater.,

Scr Met Mater.,

Fundamentals of Metal Matrix Composites,

Fatigue and Fracture, ASM Handbook,

Aluminum and Magnesium for Automotive Applications,

Mater Sci Eng A,

Acta Metall Mater.,

J Mater Sci.,

Metall Trans., Metall Trans.,

Acta Metall., Acta Metall., Metall Trans.,

Compos Sci Technol., Int Mater Rev.,

Trang 72

Metall Trans.,

Int Mater Rev., Mater Sci Eng A, Mater Sci Eng A,

J Mater Sci.,

Titanium'95 Science and Technology, Composites Part A,

Titanium'95 Science and Technology,

Titanium'95 Science and Technology,

Mater Sci Eng A, Mater Sci Eng A,

Mater Sci Eng A,

Titanium'95 Science and Technology,

Scr Met Mater., Gamma Titanium Aluminides, 1999,

High Temperature High Performance Composites,

Scr Metall Mater., Int J Powder Metall.,

J Mater Sci., Lett.,

Gamma Titanium Aluminides, 1999, Physical Metallurgy and Processing of Intermetallic Compounds, Gamma Titanium Aluminides, 1999,

Wear, Mater Sci Eng A,

Intermetallic Matrix Composites II,

Int Mater Rev., Metall Trans A,

Metall Trans A, Metall Trans A,

Metall Trans A,

Mater Sci Eng A, Mater Sci Eng A, Scr Metall Mater.,

Mater Sci Eng A,

Metall Trans A,

Metall Mater Trans A,

Trang 73

High Temperature Silicides and Refractory Alloys,

High Temperature Ordered Intermetallic Alloys VII,

Fatigue and Fracture, ASM Handbook,

J Adhes., Mater Sci Eng.,

Structural Intermetallics, Superalloys and Supercomposites and Superceramics,

Titanium'95 Science and Technology,

Metall Trans A, Intermetallic Matrix Composites III,

Metall Mater Trans A, Composite Materials Handbook,

Composite Materials: Fatigue and Fracture,

Mater Sci Eng A,

Mater Sci Eng A, Life Prediction Methodology for Titanium Matrix Composites,

Metall Trans A, Mater Sci Eng A, Life Prediction Methodology for Titanium Matrix Composites,

Mater Sci Eng A, Metall Mater Trans A,

Fatigue and Fracture, ASM Handbook,

Life Prediction Methodology for Titanium Matrix Composites,

Metal Matrix Composites: Testing, Analysis and Failure Modes, Mater Sci Eng A,

Titanium'95 Science and Technology, Composite Materials: Fatigue and Fracture, Composite Materials: Fatigue and Fracture,

Mater Sci Eng A,

Mater Sci Eng A, Mater Sci Eng A,

Mater Sci Eng.,

Trang 74

Mater Sci Eng A, Mater Sci Eng A,

Mater Sci Eng A,

Mater Sci Eng A, Mater Sci Eng A,

Mater Sci Eng A, Mater Sci Eng A, Mater Sci Eng A,

Properties of Metal-Matrix Composites

David E Alman, U.S Department of Energy, Albany Research Center

Compos Sci Technol.,

Metal Matrix Composites: Processing and Interfaces Metal Matrix Composites: Mechanisms and Properties,

Prog Mater Sci.,

Composites,

Int Mater Rev.,

Int Mater Rev.,

Prog Mater Sci.,

Sci Eng.,

Trang 75

Properties and Performance of Ceramic-Matrix and Carbon-Carbon Composites

Cynthia Powell Doğan, U.S Department of Energy, Albany Research Center

Trang 76

Trang 79

β

Trang 81

Advances in Ceramics, Advances in Ceramics, Advances in Ceramics,

Ceramic Matrix Composites,

Handbook on Discontinuously Reinforced Ceramic Matrix Composites

Handbook on Discontinuously Reinforced Ceramic Matrix Composites

Acta Metall Acta Metall

J Am Ceram Soc.,

J Am Ceram Soc.,

J Am Ceram Soc.,

J Am Ceram Soc., Ann Rev Mater Sci.,

J Mat Sci.,

J

Am Ceram Soc.,

Properties and Performance of Ceramic-Matrix and Carbon-Carbon Composites

Cynthia Powell Doğan, U.S Department of Energy, Albany Research Center

Trang 82

α

Trang 86

x-y z x-y z x-y z x-y z

Trang 87

Fine Ceramic Fibers

Handbook on Continuous Fiber Reinforced Ceramic Matrix Composites,

Properties and Performance of Ceramic-Matrix and Carbon-Carbon Composites

Cynthia Powell Doğan, U.S Department of Energy, Albany Research Center

Trang 90

x z x z x z x z

Trang 91

x y z x z x z

Trang 92

J Phys D., Appl Phys.

High Temp High Press.

Carbon, SAMPE Q.

Carbon-Carbon Materials and Composites

CR-2057, Fiber Composite Materials

J Appl Mech.,

Mechanics of Composite Materials

Composite Materials: Testing and Design, STP 617 Comp Sci Technol.,

Mater & Des.,

Ann Rev Mater Sci., Carbon,

Trang 93

Graphite Fibers and Filaments

Am Ceram Soc Bull.,

Properties and Performance of Ceramic-Matrix and Carbon-Carbon Composites

Cynthia Powell Doğan, U.S Department of Energy, Albany Research Center

Advances in Ceramics, Advances in Ceramics, Advances in Ceramics,

Ceramic Matrix Composites,

Handbook on Discontinuously Reinforced Ceramic Matrix Composites

Handbook on Discontinuously Reinforced Ceramic Matrix Composites

Acta Metall Acta Metall

J Am Ceram Soc.,

J Am Ceram Soc.,

Am Ceram Soc Bull., Fracture Mechanics of Ceramics, ,

J

Am Ceram Soc.,

Fracture Mechanics of Ceramics,

J Am Ceram Soc.,

Trang 94

J Am Ceram Soc.,

J Am Ceram Soc.,

Am Ceram Soc.,

Ceramic Matrix Composites,

J Am Ceram Soc., Mullite and Mullite Matrix Composites

Ceram Eng Sci Proc.,

Am Ceram Soc Bull.

J Am Ceram Soc.,

J Am Ceram Soc.,

J Am Ceram Soc., Ann Rev Mater Sci.,

J Mat Sci.,

J

Am Ceram Soc.,

Fine Ceramic Fibers

Handbook on Continuous Fiber Reinforced Ceramic Matrix Composites,

J Phys D., Appl Phys.

High Temp High Press.

Carbon, SAMPE Q.

Carbon-Carbon Materials and Composites

CR-2057, Fiber Composite Materials

J Appl Mech.,

Mechanics of Composite Materials

Composite Materials: Testing and Design, STP 617 Comp Sci Technol.,

Mater & Des.,

Trang 95

Ann Rev Mater Sci., Carbon,

Graphite Fibers and Filaments

Am Ceram Soc Bull.,

Properties and Performance of Ceramic-Matrix and Carbon-Carbon Composites

Cynthia Powell Doğan, U.S Department of Energy, Albany Research Center

Ceramic Matrix Composites

Fibre Reinforcements for Composite Materials

Ceramic Matrix Composites

Ceramic Matrix Composites

Carbon-Carbon Composites

Trang 96

Introduction to Product Reliability, Maintainability, and Repair

Michael J Hoke, Abaris Training Inc.; Rikard B Heslehurst, Australian Defence Force Academy

Introduction to Product Reliability, Maintainability, and Repair

Michael J Hoke, Abaris Training Inc.; Rikard B Heslehurst, Australian Defence Force Academy

Trang 97

Introduction to Product Reliability, Maintainability, and Repair

Michael J Hoke, Abaris Training Inc.; Rikard B Heslehurst, Australian Defence Force Academy

Trang 98

Designing for Repairability

L.J Hart-Smith, The Boeing Company; R.B Heslehurst, Australian Defence Force Academy

Trang 100

w d

w d

Trang 103

Designing for Repairability

L.J Hart-Smith, The Boeing Company; R.B Heslehurst, Australian Defence Force Academy

Trang 107

Trang 108

Trang 114

Joining Fiber Reinforced Plastics

Trang 115

Designing for Repairability

L.J Hart-Smith, The Boeing Company; R.B Heslehurst, Australian Defence Force Academy

Trang 117

Designing for Repairability

L.J Hart-Smith, The Boeing Company; R.B Heslehurst, Australian Defence Force Academy

Trang 124

Designing for Repairability

L.J Hart-Smith, The Boeing Company; R.B Heslehurst, Australian Defence Force Academy

Trang 125

Joining Fiber Reinforced Plastics

Trang 126

Repair Engineering and Design Considerations

Rikard B Heslehurst, Australian Defence Force Academy; Mark S Forte, U.S Air Force Research Laboratory

Trang 127

Repair Engineering and Design Considerations

Rikard B Heslehurst, Australian Defence Force Academy; Mark S Forte, U.S Air Force Research Laboratory

Trang 128

Strength Restoration:

Stability Requirements

Trang 130

Repair Engineering and Design Considerations

Rikard B Heslehurst, Australian Defence Force Academy; Mark S Forte, U.S Air Force Research Laboratory

Trang 132

Proc of 37th International SAMPE Symposium and Exhibition

Trang 133

Numerical Analysis and Modelling of Composite Materials

Proc of 37th International SAMPE Symposium

Bonded Repair of Aircraft Structures,

Composite Materials for Aircraft Structures, AIAA Education Series,

Proc of the 39th SAMPE International Symposium and Exhibition

Repair Engineering and Design Considerations

Rikard B Heslehurst, Australian Defence Force Academy; Mark S Forte, U.S Air Force Research Laboratory

Ngày đăng: 10/08/2014, 13:20