Smithells Light Metals Handbook Part 1 docx

Smithells Light Metals Handbook... Smithells Light Metals Handbook Edited by E.. Linacre House, Jordan Hill, Oxford OX2 8DP 225 Wildwood Avenue, Woburn, MA 01801-2041 A division of Reed

Smithells Light Metals Handbook

Smithells Light Metals Handbook

Edited by

E A BrandesCEng, BSc(Lond), ARCS, FIM

and

G B BrookDMet(Sheff), FEng, FIM

Linacre House, Jordan Hill, Oxford OX2 8DP

225 Wildwood Avenue, Woburn, MA 01801-2041

A division of Reed Educational and Professional Publishing Ltd

First published 1998

Reed Educational and Professional Publishing Ltd 1998

All rights reserved No part of this publication may be reproduced in

any material form (including photocopying or storing in any medium by

electronic means and whether or not transiently or incidentally to some

other use of this publication) without the written permission of the

copyright holder except in accordance with the provisions of the Copyright, Designs and Patents Act 1988 or under the terms of a licence issued by the Copyright Licensing Agency Ltd, 90 Tottenham Court Road, London,

England W1P 9HE Applications for the copyright holder’s written

permission to reproduce any part of this publication should be addressed

to the publishers

British Library Cataloguing in Publication Data

A catalogue record for this book is available from the British Library ISBN 0 7506 3625 4

Library of Congress Cataloguing in Publication Data

A catalogue record for this book is available from the Library of Congress

Typeset by Laser Words, Madras, India

Printed and bound in Great Britain by Hartnolls Ltd, Bodmin, Cornwall

Titanium and titanium alloys corresponding grades or specifications 3

2 General physical properties of light metal alloys and pure light

metals

5

2.1 General physical properties of pure light metals and their alloys 5

3 Mechanical properties of light metals and alloys 14

vi Contents

4 Smithells Light Metals Handbook

Table 1.3 (continued )

UK

British Standards

designation DTD seriesŁ 9183, 9184 BWB series† mendations AMS series‡ ASTM series

IMI 325 T-A3V2.5 3.7194 AMS 4943 ASTM grade 9

4944 IMI 550 BS TA 45 51, 57 T-A4DE 3.7184 Ti-P68

IMI 551 BS TA 39 42

IMI 624 T-A6Zr4 3.7144 AMS 4919,

DE 4975, 4976 IMI 646 AMS 4981

IMI 662 3.7174 AMS 4918,

4971, 4978, 4979 IMI 679 BS TA 18 20, AMS 4974

25-27

IMI 680 DTD 5213 T-E11DA

IMI 685 BS TA 43, 44 T-A6ZD 3.7154 Ti-P67

IMI 811 T-A8DV AMS 4915,

4916 IMI 834 T-A6E

Zr4Nb

Ł UK BS 3531 Part 1 (Metal Implants in Bone Surgery), and Draft British Standard for Lining of Vessels and Equipment for Chemical Processes, Part 9, also refer.

†Germany DIN 17850, 17860, 17862, 17863, 17864 (3.7025/35/55/65), and TUV 230-1-68 Group I, II, III and IV also refer.

‡USA MIL-T-9011, 9046, 9047, 14577, 46038, 46077, 05-10737 and ASTM B265-69, B338-65, B348-59T, B367-61T B381-61T, B382-61T also refer.

wrought

Coefficient

H12

H16 H18

continued overleaf

Table 2.3 (continued)

wrought

Coefficient

H16

H111 D Annealed T4 D Solution treated and naturally aged.

H12,22 D Quarter hard T6 D Solution treated and artificially aged.

H14,24 D Half hard.

H16,26 D Three-quarters hard.

H18,28 D Hard.