Plastic Product Material and Process Selection Handbook Part 18 docx

5 8 0 Plastic Product Material and Process Selection Handbook 102 Gaukroger, T., Adding Process Flexibility to Rigid PVC, PE Europe, May 2003.. 582 Plastic Product Material and Process S

References 579

74 Wigotsky, V., Compounding, PE, Jan 2002

75 North American Plastics Recyclers and Brokers 2002 Survey, PN, May 20

79 Esposito, F., Resin Makers to Announce New Products, PN, May 2003

80 Plastic Fuel Tank Meets PZEV Regulation (vehicle emission rate), PE, May

2003

81 Engineering Materials Handbook, Vol 2: Engineering Plastics, ASM International, 1988

82 High Temperature Polyolefin Fibers and Yarns, PE, May 2003

83 Colvin R., Heavy-Duty, Self-Sealing Bag Challenges Paper Sacks, MP, Mar

2003

84 TPVs Can Withstand Higher Temperatures, PN, Apr 28, 2003

85 Get a Grip (Santoprene), PE, Feb 2 0 0 3 /

86 TPVs Do Windows (and Doors), PE, Feb 2003

87 TPEs Goes Where Others Cannut, PE, Dec 2002

88 Automotive, Soft-Touch Markets Promise Strong Year (TPEs), MP, Feb

2003

89 Non-Blooming, Non-Fogging UV Stabilizer for TPOs, PT, May 2003

90 Toensmeier, P A., Stretch Film Provides Shrink film Performance, MP, Mar.2003

91 Thedinger, B., Trash Bags & Liners Grow at Rate of GDP, PT, Mar 2003

92 ExxonMobil Adds mLLDPE with Higher Densities, PT, Feb 2003

93 Dow Discovers New Class of Post-Metallocene' Polyolefin Catalyst, PT, May 2003

94 Materials Data, PE, Apr 2002

95 Combining Metallocene Technology with Gas Phase EPDM, PE, Feb 2003

96 Heller, M A., Guide to Medical Device Regulation, Thompson Publ Group, Inc., 2003

97 BOPP Film Demand in North America, PN, May 5, 2003

98 Defosse, M., Public's Education is Key to Vinyl's Acceptance, MP, Jun

2002

99 Environmental Briefs, The Vinyl Institute, May 2000

100 Toensmeier, P A., Vinyl Forum has Value for the Public, MP, Dec 2002

101 Toloken, S., PVC Blend Improves Blood-Clotting Options, PN, Mar 3,

2003

5 8 0 Plastic Product Material and Process Selection Handbook

102 Gaukroger, T., Adding Process Flexibility to Rigid PVC, PE Europe, May

2003

103 Annual Vinyl Window Market Growth, PN, Feb 3, 2003

104 Annual Vinyl Siding Market Growth, PN, Apr 28, 2003

105 DcFosse, M., Mature Industry Still Has Room for Growth (PVC), MP, Feb 2003

106 There's lots New in Acetal, PT, May 2003

107 Rosenzweig, M., Tough Auto Requirements Drive Fluoroelastomcrs Growth,

MP Jan 2003

108 Auto Industry Drives European Fluoropolymers, PE Europe, May 2003

109 Fluoropolymer is a Better Barrier for Fuel Hoses, PT, Mar 2003

110 Modified PTFE Improves Properties and Processing, PT, May 2003

111 Right Inside the GearBox: Polyamidc 6.6 Stands the Heat in BMW 7 Series, Polymotive, Feb 2, 2003

112 PBT Designed for Use with Water-Assist Molding, PM&A, May 2003

113 Dow Unit to Market Cyclics PBT Materials, PN, Apr 28, 2003

114 Structural Products has 8 New Offerings (GE/PC), PN, May 12, 2003

115 Renstrom, R., Downloading to Hard Drives could Shrink Market for (PC) Discs, PN, Mar 10, 2003

116 Taking the Heat (polyester transparent, thermoformable sheet), PE Europe, May 2003

117 PEEK Preview, PE Europe, May 2003

118 PET Boost for Bottled Beer, PE Europe, May 2003

119 Shrink-Sleeve Polymer (for PET bottles), PE, May 2003

120 Wide Mouth PET Bottles Get OTE Closures (outside tamper evident), PT, May 2003

121 Polysulfone on a Power Trip, PE, Jan 2003

122 Klempner, D., et al., Advances in Urethane Science and Technology, Rapra Technology Ltd., 2002

123 Cutting Down on Freeze-Ups (TPUs), PE, Feb 2003

124 TPUs Get a Grip On Overmolding, PT, May 2003

125 Wheelchair Cushions Rest on TPU Attributes, PE, May 2003

126 Knights, M., LSR (Liquid Silicone Rubber) Finds an Old Trick can Overcome New Challenges, PT, Feb 2003

127 North American Recycling Market, PN, May 26, 2003

128 Shut, J H., Recycling Conference Shows Off New Ways to Enhance Recycled Plastics, PT, May 2003

129 Toloken, S., Chicago Getting M1-Bottles Recycling Site, PN, Jun 2, 2003

130 Sefosse, M., Wood Composites are Expanding Among Sectors (with recycled plastics), MP, Jan 2003

References 581

131 Railway Ties Gain Ground, MP, Feb 2003

132 New Materials and Processing- Design Success, Design News, Apr 23, 2000

133 Markets May Warm Up to Thermochromic Effects, MP, Mar 2003

134 Mapleston, P., End-Users Fire Up Demand for High Heat Thermoplastics,

MP, Jun 2002

135 Naitove, M., Editorial, PT, Jan 2003

136 Market Data Book, PN, Dec 30, 2003

137 SPI Issues Third-Quarter Equipment Sales Statistics, PE, Jan 2003

138 Capacity Utilization for Plastic Product Manufacturing, PN, Feb.17, 2003

139 Japan's Exports and Imports of Plastics/Rubber Processing Equipment,

142 Mapleston, P., Specialized Techniques, MP, Jun.2002

143 Rosato, D V., Extruding Plastics: Practical Processing Handbook, Kluwer,

146 Finan, J M., Thermally Conductive Thermoplastics, PE, May 2000

147 Coleman, B D., Thermodynamics of Materials with Memory Treatise, Arch Rat Mech Anal., 1964

148 Moore, S., Preventive Purging has Practical Benefits, MP, Sep 2002

149 Van Haste, F., Chemical Purging: When and How to Do It Right, PT, Feb

155 Temperature Settings, IM, Feb 2002

156 Wiczer, J., New Efforts to Streamline Smart Sensor Standards, ECN, ep

2003

582 Plastic Product Material and Process Selection Handbook

157 Rucinski, P., Manufacturing Solutions for the Automation, Control, and Monitoring of the Injection Molding Process, SPE IMD Newsletter, Issue

59, Spring 2002

158 Moldflow Corp., 91 Hartwell Ave., Lexington, MA 02421, tel 781-674-0085, Fax +1-781-674-0267, http://www.moldflow.com, http ://www cmold, com

159 DCS, PLC, and PC Technologies Converge in New Breed of Hybrid Controllers, InTech, Jan 2003

160 Brazier, G., Safe Wireless Sensing, InTech, May 2003

161 Extrusion monitoring Goes Wireless, PT, May 2003

162 Herb, S., Weapon for Mass Production; Distributed Microprocessing Without the Traditional Complexity, Cost, and limits, InTech, Aug 2003

163 Rauwendaal, C., Look Out for Metal-to-Metal Wear, PT, May 2003

164 Rosato, D V., Blow Molding Handbook, 2 ed Edition, Hanser, 2003

165 Jovalusky, J., Integrating Circuit-Protection Functions Reduces Power Source Costs, ECN, Jun 2003

166 Watkins, F., et al., Control Technologies for Safety and Productivity, InTech ISA, Feb 2002

167 Colvin, R., Automated Roll Handling Boosts Cast Film Operations; Cost Plays a Secondary Role to Improved Productivity, Quality, and Safety, MP Nov 2000

168 Rosato, D V., Nick's Notes: Safety Issue, Molding Views, Injection Molding Division Newsletter of SPE, No 60, May 2002

169 Pockham, G., Safety Sign Formats, Compliance Engineering, May/June

172 Rosato, D V., Plastics Industry Safety Handbook, Cahners, 1973

173 Rosato, D V., Injection Molding Chapter: R F Jones book Guide to Short Fiber RP, Hanser, 1998

174 Rosato, D V., Injection Molding Higher Performance Reinforced Plastic Composites, J of Vinyl & Additive Technology, Sep 1996

175 Bozzelli, J W., Going from Hydraulic to Electric: Processor's Perspective, IMM, 2002 Annual

176 Snyder, M R., Milacron Launches Internet-Based Link for Injection Molding Machine Diagnostics, MP, Jul 2000

177 Robot 2004 Worldwide Directory, Robotics World/Motion Control, July/Aug 2003

178 Shad Foresees Consolidations Continuing, PN, May 5, 2003

References 5 8 3

179 Electric Machines and New Processes Catch Fire, PT, Jan 2003

180 Schut, J H., Interchangeable Dam Adds Versatility to Screw, PT, Jan

2003

181 SPC System Meets Custom Applications, IM, Jul 2002

182 Larscn, A N., ct al., Is thc Shear Heating Phenomenon Truly Responsible for Viscosity Reduction in Thermoplastic Injection Molding? SPE ANTEC,

1998

183 Dcaly, B., Size Does Matter for Injection Units, MP, Jul 2002

184 Maplcston, P., Cavity Pressure Control System, MP, Jun 2002

185 Dcmirci, H H., Process Window Identification for a very Tight-Tolerance Injection Molded Part with Multiple Performance Criteria, SPE ANTEC,

190 Water Injection Technology Used in Injection Molding, Polymotive, Feb

2003

191 Hollow to the Core, PE Europe, May 2003

192 Juntgcn, T., ct al., The Water-Injection Technique (WIT) as an Attractive Alternative and Supplement to Gas-Assisted Injection Molding (CAIM), SPE-IMD Molding News, No 61, Winter 2003

193 Tustison, L., Overmolding Overview, IM, Jul 2002

194 Cha, S., ctal., 3-D Simulation of Thin-Wall Injection molded Parts by CAE, SPE IMD News, May 2002

195 Extrusion List: Buyers' Guide, SPE, Aug 2003

196 White, J., et al., Screw Extrusion, Hanscr, 2003

197 Moore, S., Reactive Extrusion Aids Bottle-to-Bottle Recycling, MP, Mar

2003

198 Schut, J H., Torquc and Speed: How Much is Enough? PT, Scp 2002

199 Toensmeier, P A., Package Design Advances Enhancc Brand Awareness,

5 8 4 Plastic Product Material and Process Selection Handbook

202 First Nylon/Acrylate TPVs are Now Commercial, PT, May 2003

203 Castillo, R., Coextrusion Die Design Doubles Number of Layers for Packaging Films and Blow Molding Parisons, SPE ANTEC, 2001

204 Thielen, M., Blow Molding, Sequential Coextrusion: Advanced Technology Opens Door into a New World of Tailored Parts, Modem Plastics Encyclopaedia, 1999

205 Schut, J H., Stretching Film's Limit (5-to-7-to-9), PT, Feb 2003

206 Coextruding Multilayer Blown Film, Dow Chemical Co., 1970s

207 Toensmeier, P A., Flex Tech Stakes Its Future on success of Coex MDO,

MP, Feb 2003

208 Emboss Film Without Heat, PT, Feb 2003

209 Changing Market in Compounding Machinery, PE Europe, May 2003

210 Schut, J, H., Long-Fiber Thermoplastics Extend their reach, PT, Apr

2003

211 Rosato, D V., Concise Encyclopedia of Plastics, Kluwer, 2000

212 Rosato, D V., Current and Future Trends in the Use of Plastics for Blow Molding, SME, 1990

213 Defosse, M., Large Blow Molded Containers Take Off, MP, Apr 2000

214 Blow Molding Higher Output Vies with Flexibility, PT, May 2003

215 Thedinger, B., Blow Molded Drums, IBCs, and THPs Stuck in Low Gear,

PT, Jan 2003

216 O-I Launches See-Through PET Beverage Can, PT, Jan 2003

217 European Union Gives Tetra Laval the Green Light to Acquire Sidel, MP, Feb 2003

218 Pryweller, J., Blow Molders Showcase Stock, PN, May 5, 2003

219 Plastics Pipe Institute, 100-Year Design Life Cited for Corrugated HDPE Pipe, PT, June 2003

220 Leaversuch, R., Blow Molding Equipment, PT, June 2003

221 Keener, C et al., Optimizing Extrusion Blow Molding for Multilayer Container Production, Graham Machinery Group, York, PA, Aug 15,

Re%renees 5 8 5

227 Moore, S., Two-Stage Stretch (Injection) Blow Process Claims Benefits for Drink Cups, MP, Jan 2003

228 Lee, N C., Control Flash in Extrusion Blow Molding, PT, Sep 2002

229 Freeman, R., Pressure Forming with Style, SPE Thermoforming Quarterly, Spring 1999

230 Throne, J L., Technology ofThermoforming, Hanser, 1996

231 Defoose, M., Fuel Tank Makers Appear to Ease Off Thermoforming, MP, Sep 2002

232 McConnell, W K., Ten Fundamentals ofThermoforming, SPE, 2002

233 Gerber Products Invests in Plastic (Thermoformed Baby) Jars, PN, May

236 Thermoforming Buyers' Guide, PE, Feb 2003

237 Top Ten North American Thermoformers, PN, Feb 10, 2003

238 Toensmeier, P A., Automotive is Fertile Ground for Growth, MP, Nov

2002

239 Thermoforming Nylon, PE, May 2003

240 All PP Composites Could Challenge GMT (Glass-Mat-Thermoplastic) in Markets, MP, June 2003

241 PLA (polyactic acid) Makes U.S Debut in Thermoforming (Food) Packaging, PT, May 2003

242 Mcinzinger, D., Thermal Expansion of Plastics, SPE Thermoforming Div Newsletter, Vol 20, No.l, 2001

243 Hard Fact: Packaging (Blister) Can Save Kid's Lives, PN, Feb 24, 2003

244 Form/Fill/Seal Machine Targets Bottle Blow Molding, MP, June 2003

245 Melt=Phase Billet Rorming Adds New Option for Containers, PT, Jan

2003

246 Murray, C J., Foam Exhibits Negative Poisson's Ratio, DN, Dec 1989

247 Microcellular Foam Technology, IMM, Dec 2001

248 Osswald, T A & G Mcnges, Material Science of Polymers for Engineers, 2nd Edition, Hanser, 2003

249 Meeting the dead Line: Urethane Foams Move from HCFCs to 'Cleaner' Blowing Agents, PT, Jan 2003

250 Hoechtlcn, A and Drostc, W., (to I.G Farbcnindustrie A.G.) DRP 913,

474, Apr 20, 1941 (Japanese Patent Publication No Sho-31-7541)

251 Flame Rctardant Agrees with Montreal Protocol, PE, Jan 2003

252 Sherman, L M., Polyurethane: Get Ready for HCFC Phase-Out, PT, Dec

2001

5 8 6 Plastic Product Material and Process Selection Handbook

253 Sentinel Products Introduces Expanded PP Sheet, PN, June 2, 2003

254 Foam Polystyrene with Nanoclay and CO2, PT, May 2003

255 PUR Flushing Solvents Leave Less Residue, PT, May 2003

256 Recycling PUR Foam is Gleaned from Mattresses, MP, Feb 2003

257 Trexel Licenses Users ofDemag Ergocell System, PT, Dec 2001

258 Elden, R A., et al., Calendering of Plastics, London Iliffee Books, 1971

259 Compunding and Mixing, PT, June 2003

260 Haberstroh, E., et al., In-Mold Film Method Targets PUR Exteriors (Autos), MP, Sep 2002

261 Automotive Paint-Finding the Right Formula, Polymotive, Feb 2003

262 Polymer Glass Coating Creates Germ-Free Surfaces, MD&DI, Jan 2002

263 Snyder, C D., Materials for Reaction Injection Molding Processing, Composite Fabrication Assoc., Oct 3-6, 2001

264 Palmosina, M F., Gating for the Reaction Injection Molding Process, Bayer Corp., Pittsburgh, PA, 2002

265 Rosato, D V., Plastics Processing Data Handbook, Kluwer, 2nd Ed., Kluwer, 1997

266 Integral Skin Foam Protects Fancy Tires, PT, Sep 2002

267 Poly-DCPD RIM Shifts into High Gear, PT, Sep 2002

268 Frederick, C D., et al., Rotational Molding, Plastics Solutions International 2000

269 Rotational Molding Transforms Movie Characters into Merchandise, Job Shop Tech., Aug 2002

270 Rotational Molders-Listing, Ranking, and Survey, PN, Aug.11, 2003

271 Bregar, B., Research Shows Promise for Rotomolded PP, PN, Aug 5, 2002

272 Rotomolders get New Alternatives to XLPE, PT, Sep 2002

273 Chroma Corp., McHenry, IL, Attention Rotomolders: Clean Air Mixers Faster, PT, Sep 2002

274 Knights, M., New Technologies Add Zip to Rotomolding, PT, Jan 2003

275 Henkel Loctite, Rotomolding Release Suits Multiple Releases, MP, Oct 2002

276 Dorgham, M & Rosato, D V., Designing with Plastic Composites, Interscience Enterprises-Geneva, 1986

277 Fussell, E., Sheding Light on Industrial Fiber Optics: A Strand of Hope for Fiber's Future, InTech, June 2003

278 Daido Steel, Tool Steel Selection Software Targets Mold Making Startups, Modern Mold, 2000

279 Davis, B A., et al., Compression Molding, Hanser, 2003

280 Krottner, V., Teach Yourself Polishing, Moldmaking Technology, Aug

2000 & Reclaiming the Lost Art of Benching, Moldmaking Technology, Oct 2000

284 Stoeckhert, K., Mold Making Handbook, 2nd Edition, Hanser, 1998

285 The 2004 Corvette to Sport Carbon Fiber Hood, PN, June 2, 2003

286 Smart Move: Forfour Targets U.S Market (includes Plastics), PN, Jan.27,

2003

287 Engineering a Composite Hyperyacht, RP, Dec 2002

288 Arctic (RP) Radomes, RP Dec 2002

289 McConnell, V P., Composites and the Fuel Cell Revolution, RP, Jan

2002

290 High-Performance Short-Fiber PP Rivals Long-Fiber Grades, Mr', June

2003

291 Purified Cellulose Fibers Show Promise in Reinforced Thermoplastics

292 Marsh, G., Filling the Front-Line Training Gap, RP, Apr 2002

293 Marsh, G., MACT: A More Restrictive World for Boatbuilders, RP, Jan

2002

294 Rosato, D V., Industrial Plastics in Materials Handling, International Mgm Soc., Oct 1985

295 Jacob, A., Spray-up Offers Process Improvements, RP, Jan 2002

296 Soft Touch with Injection Compression Moulding, Polymotive, Feb 2003

297 Knights, M., Metal-Powder Injection Molding Moves Into Large Parts,

302 Engineering Resins (PPO) Extend their Reach, PT, June 2003

303 Compounder Creates Flexible Process with Conveyor Line, Plastics Machinery & Auxiliaries, May 2003

304 Combine Melts & Liquids of Different Viscosities, PT, Jan 2003

305 Compounding & Mixing Equipment, PT, June 2003

306 Esposito, F., Compounders will Unveil an Assortment of Products (NPE),

PN, May 12, 2003

588 Plastic Product Material and Process Selection Handbook

307 Flexible PVC, PE, Jun 2002

308 Coaker, A W., Twentieth Century Ethics of Risks and Hazards in Business, SPE Vinyl Div Newsletter, Jun 1995

309 Handbook for the Metalworking Industries, Gardner Publ., 2002

310 Tobin, B., What is a Mold Worth? PM&A, Apr 2003

311 Mirman, I., A Model is Worth a Thousand Drawings, MoldMaking Tech., June 2003

312 Molds and Tools, PT, June 2003

313 Creehan, K D., Developing Generalized Reverse Engineering Methodologies for Moldmaking, MoldMaking Tech., June 2003

314 Top 20 Mold Makers, PN, Mar 17, 2003

315 Baranek, S L., The International Special Tooling and Machining Association: A World Power, MoldMaking Tech., June 2003

316 Bales, S J., How to Locate the Right Polishing and Plating Vendor, MoldMaking Technology, Sep 2002

317 Kaszynski, J., Ensuring Mold Steel Polishability, MoldMaking Technology, Mar 2003

318 Ultrasonic Mould Cleaning, Polymotive, Feb 2003

319 Bales, S J., Mold Preservation and Maintenance for Ultimate Productivity, MoldMaking Technology, Dec 2001

320 Rich, M J., et al., Surface Cleaning of Mold Release Compounds, SPE ANTEC, 2002

321 Dry-Ice Cleans Tools Fast, PT, Feb 2002

322 Knights, M., Unscrewing Molds Go Electric, PT, Sep 2002

323 Buyers' Guide to Molds, Dies, and Mold components, PE, Jan 2003

324 Monitoring Software Targets Family Molds, PT, May 2003

325 Gorlich, R., et al., Designing 48 Individual Cavities in One Mold Plate, MoldMaking Tech., Feb 2003

326 Mold Design to Automation, IM, Feb 2002

327 Kaszynski, J., Choosing Thermally Conductive Tooling Materials, MoldMaking Tech., Aug 2002

328 Piscope, S., Milling Advances Increase Productivity, MoldMaking Tech., Jun 2002

329 Roy, S., et al., Options for Restoring Molds, MoldMaking Tech., Sep

2002

330 D-M-E Releases Survey on Mold and Die Industry, PE, Aug 2002

331 Dealey, B., What Could the Mold of Tomorrow be Like? MP, Feb 2003

332 Mold Designers Put the Web to Work, PT, Mar 2003

333 Software Checks Profile Die Designs, PT, May 2003

334 CAD, CAM, & CAE Listing, PT, June 2003

337 Rapid Prototyping, Rapid Tooling, PE, Apr 2002

338 Rufo, M., Rapid Prototyping: Is It Common? MoldMaking Tech., Sep

2002

339 Rapid Prototyping System Produces Models with Improved Resolution,

MP, Sep 2002

340 Gebhardt, A., Rapid Prototyping, Hanser, 2003

341 Moore, S., Stereolithography Advances with Desktop System-Performance Resins, MP, June 2003

342 Colvin, R., New Software Speeds and Simplifies Plastics Mold Design Works, MP, May 2000

343 Shortt, M., Revenues Decline, Productivity Rises in Rapid Prototyping Industry, Job Shop Tech., May 2003

344 Seeley, R S., Rapid Prototyping: No Longer Just for Design Engineers, Job Shop Tech., May 2003

345 Auxiliary Buyers Guide, PE, Mar & July 2003

346 Dryers/Hopper Loaders Buyer's Guide, PM&A, May 203

347 Materials & Parts Handling Equipment, PT, June 2003

348 Loading the Hopper, PE, Feb 2003

349 Heating & Cooling Equipment, PT, June 2003

350 Cutting & Trimming Equipment, PT, June 2003

351 Naitove, M., Joined-Arm Robot Handles Insert Loading and Part Removal, PT, June 2003

352 New Source of Electronic Color-Matching Software, PT, May 2003

353 Recycling & Scrap Equipment, PT, June 2003

354 Salerni, C M., Light-Cured Cyanoacrylates: An Adhesive Option for Medical device Assembly, MD&DI, Jun 2002

355 Ogando, J., Bonding Plastics 101, DN, Jan 22, 2001

356 Handbook of Plastics Joining, PDL, 1997

357 Thompson, R., Adhesive Bonding, MP Encyclopedia, 1986-1987

358 Grewell, D A., Plastics and Composites Welding Handbook, Hanser,

2003

359 Welding, Bonding, & Assembly Equipment, PT, June 2003

360 Rohifs, T., Plastics Machining: Understanding the Basics, MD&DI, Apr

2002

361 Bogin, M., Working with Plastics Made Easier with Basic Machining Techniques, Job Shop Tech., May 2001

5 9 0 Plastic Product Material and Process Selection Handbook

362 Koenig, K M., Fixturing & Routing Plastics with CNC Tooling, Plastics Machining & Fabrication, Winter, 1997

363 Competitive Pressures Spur Shops to Tap EDM Automation, MP, Oct

367 Crosby, P., Get to Know Lasers and their Role in Plastics, PT, Jun 2002

368 Mapleston, P., Delcam Unveils Morphing, Automatic Machining Capabilities, MP, Aug 2002

369 Sudhakar, M., New Developments in High-Speed Machining Technology, MoldMaking Tech., Mar 2003

370 Cutting Tools Directory, MoldMaking Tech., Jan 2003

371 Lowrance, W W., Of Acceptable Risk: Science and the Determination of Safety, Wm Kaufmann Inc., 1976

372 Sherman, L M., How to Buy Universal Testing Machines, PT, Feb 2003

373 Supporting Composites Standardization: Part 1, RP, Dec 2002

374 ISO-9000 Part 2-Requirements, PE, Feb 2003

375 ISO-13485 Splits fom ISO-9000, MD&DI, Feb 2003

376 Where is that Barrier: Multilayer Gauge, PE, Feb 2003

377 Rosato, D V Capt., All Plastic Military Airplane Successfully Flight Tested, Wright-Patterson AF Base, Ohio, 1944

378 ASTM International Directory of Testing Laboratories, ASTM, 1999

379 Hertzberg, R W., et al., Fatigue Testing-Flaws Makes It Better, PW, May

1977

380 Mordfin, L., Handbook of Reference Data for Nondestructive Testing, ASTM, 2002

381 Sims, G., Composite Testing, Plastics Solutions International 2000

382 Testing Against Trouble, World Plastics Technology, 2001

383 Wigotsky, V., Plastics Testing, PE, Feb 2002

384 ASTM Book of Standards, Section 8: Plastics, Four Volumes, Annual Issues

385 ASTM Dictionary of Engineering Science and Technology, 9th Ed., ASTM, 2OOO

386 ASTM IndexmAnnual Book of ASTM Standards, ASTM Annual

387 ISO Standards Compendium ISO 9000: Quality Management, 9th Ed., ASTM, 2001

References 591

388 ISO Standards Handbook-Statistical Methods for Quality Control, 4th Ed., ASTM, 1995

389 Sherman, L M., Testing & Quality Control, PT, June 2003

390 Rosen, R., Project Advisory Board: Improving Product Development Quality and Consistency, MD&DI, Feb 2003

391 Abbott, W H., Statistics can be Fun, A Abbott Publ., Chesterland, OH

44026

392 Hannagan, T., The Use and Misuse of Statistics, Harvard Management Update, May 2000

393 Mamzic, C L., Statistical Process Control, ISA, 1995

394 Rauwendaal, C., Statistical Process Control in Extrusion, Hanser1993

398 General Motors Statistical Process Control Manual, GM-1693, GM Corp.,

398 Dow Sharpens Cutting Edge, Industry News, PE, Feb 2002

399 Leaversuch, R., Biodegradable Polyesters, PT, Sep 2002

400 Pryweller, J., U.S Final Frontier for Biodegradable Resins, LN, Sep 2,

405 US Bridges Deficient, RP, Sep 2002

406 Resin Review: The Annual Statistical Report of the U.S Plastics Industry, APC (formerly published by SPI as Facts and Figures in the U.S Plastics Industry), Annual

407 Rosato, D V., Designing with Plastics, Rhode Island School of Design, Lectures 1987-1990

408 Newborn, F., Cultivating a Spirit of Innovation, DN, Dec 17, 2001

409 Acquarulo, L A., et al., Enhancing Medical Device Performance with Nanocomposite Polymers, MD&DI, May, 2002

410 CAD/CAM Directory, MoldMaking Tech., May 2003

411 Corelli, C., Rethink Your Business Strategy, MoldMaldng Tech., May,

2003

412 Johnson, C., et al., Quick and Below Budget, Industrial Computing, May

2003

592 Plastic Product Material and Process Selection Handbook

413 Moore, S., Global Demand Heats Up in High-Volume Markets, MP, Feb

2003

414 Toensmeier, P A., Market Dynamics Redraw the Graph of Resin Supply,

MP, Feb 2003

415 Recognize the Need, Generate the Lead, I-R World, Jan-Feb., 2003

416 European Plastics Directory: Materials, Semi-Finished Products, Machinery, & Ancillary Equipment, Rapra, 2003

417 Nypro Vision, Passion is Model of Success, PN, May 19, 2003

418 Shapiro, J K., Medical Device Reporting: A Risk-Management Approach, MD&DI, Jan 2003

419 Schmidt, M W., Establishing Overall Risk for Medical Devices, MD&DI Feb 2003

420 In Pursuit of Failure, MD&DI, Feb 2003

421 Rosato, D V., Environmental Effects on Polymeric Materials, Volumes 1 &

II, Wiley, 1968

422 Dow (Automotive) to Develop CBT Auto Structures, RP, June 2003

423 Bregar M., Monsanto Saw Potential of Michael Gigliotti, Plastics News, June 23, 2003

424 Bregar, B., From War and Beyond, Rosato Has Write Stuff, Plastics News, June 23, 2003

425 Pryweller, J., It's A First: KWS puts Paint in an (IM) All Plastic (Recycled PP) Can, Plastics News, June 23, 2003

426 Mapleston, P., Compounds are Conductive or Not as Necessary, MP, Mar

432 Simulation Software Gains New Capabilities (warp, etc.), PT, Fib 2003

433 Kingberg, P M., Facing Water Management Issues that are Critical in Processing Settings, Plastics Auxiliaries & Machinery, June 2003

434 Extrusion Line Changes Dimensions at Button's Touch, Plastics Auxiliaries

& Machinery, June 2003

435 Blow Molding Technical Papers, SPE Annual, Oct 14-15, 2003

436 Extrusion with No Confusion (Harrel Inc.), PE, June 2003

439 Producing Fibers that Mimic Spider Silk, MD&DI, June 2003

440 Boron-Free Glass Fibres-the Trend for the Future, RP, June 2003

441 Technology Update: Prepregs, RP, June 2003

442 Spray Equipment Adapts for Success, RP, June 2003

443 Focused on Foam: Sentinel Producys Corp., PT, Jul 2003

444 Okamoto, K T., Microcellular Processing, Hanser, 2003

445 Composites Certification Program Hits 1000 Mark, PT, July 2003

446 Automotive PC Glazing System Makes Debut at NPE, PT, July 2003

447 New Welding Technologies, PT, July, 2003

448 Grewell, D et al., Plastics and Composites Handbook, H anser, 2003

449 Clarity a Big Shot: Aircraft Canopy, PT, July 2003

450 Self-Reinforcing Thermoplastic is Harder, Stronger, Stiffer Without Added Fibers, PT, July 2003

451 HDPE for Pipe Gets Top Performance Ratings: 100 yr Pressure Rating,

PT, July 2003

452 Buyer's Guide: A Directory of Moldmaldng Products and Services and Their Suppliers, MoldMaldng Technology, July 2003

453 Avoid Common Mold Set-Up Mistakes, PT, July 2003

454 New Generation DMA (dynamic mechanical analysis), PE, June 2003

455 Testing Equipment Buyers' Guide, PE, June 2003

456 Test Equipment and Software (EMC, ESD, Telcom, Environmental, and Safety), Compliance Engr., Annual, 2003

457 Testing and Services, Compliance Engr., Annual, 2003

458 Advances in Medical Plastics, MD&DI, June 2003

459 pryweller, J., Mold-Masters Cautious on Road to China, Plastics News, Jun 24, 2003

460 Product Safety Standards, Compliance Engr., Annual, 2003

461 Valero, G., Shifting Paradigms, MP, July 2003

462 Blanco, A., Functional and Aesthetic: Acetal, PE, July 2003

463 Making Smarter Plastics, MD&DI, July 2003

464 Metal Molding Shapes Up As Appealing Market, MP, Aug 2003

465 Boeing Opts for Composites for 7E7, RE, July/Aug 2003

466 Carbon Fibre SMC Halves Weight of Automotivc Parts, RP, July/Aug

2003

467 Prepreg Qualification Scheme, RP, July/Aug 2003

5 9 4 Plastic Product Material and Process Selection Handbook

468 SPI Reaches Tentative Pact on PFOA Tests, PN, July 14, 2003

469 Technology Update: Compression Moulding, RP, July/Aug 2003

470 Snyder, M R., Size Reduction Equipmenet, PM&A, July/Aug 2003

471 Deligio, T., Structural Plastics Combines Form and Function: RIM, PM&A, July/Aug 2003

472 Piezoelectric Sensor Suits Small Mold Applications, PM&A, July/Aug

2003

473 Bayer Polymers Focuses on Profitability, RP, July/Aug 2003

474 Leventon, W., Hemocompatible Coatings for Blood-Contacting Devices, MD&DI, Aug 2003

475 Esposito, F., Toll Compounders Forming Global Alliance, PN, July 28,

2003

476 NPE New Technology Wrap-Up: Injection, Extrusion, Blow, Thermoforming, PT, Aug 2003

477 Rotomolders Learning the Language of Automation, MP, Aug 2003

478 Manufacturing Promotes Growth, PN, July 28, 2003

479 Sloan, J., The Value of Making Things: Divest in Manufacturing and Trade Stuff, MP Aug 2003

480 Cermak, B., Growing Strong: Save American Manufacturing, MoldMaking Tech., Aug 2003

481 Panagas, J., Making Plastic Parts in Five Weeks: Casting in silicone rubber molds, MoldMaking Tech., Aug 2003

482 Bassi, G P., Designing Molded Products Just Got Simpler, MoldMaking Tech., Aug 2003

483 Brockman, D., et al., How to Choose the Right Plated Coating for Improved Mold Performance, MoldMaking Tech., Aug 2003

484 Davis, B., et al., Compression molding, Hanser, 2003

485 U.S PET Beverage Container Market, PN, Aug 18, 2003

486 Leventon, W., Material Progress Toward Better molded Parts, MD&DI, Mar 2003

487 Scherr, J., Flow Analysis Gets it Right the First Time, PT, Apr 2003

488 Rosato, D V., et al., Filament Winding-Its Development, Manufacture, Applications, and Design, Wiley, 1064

489 S T Peters, et al., Filament Winding Composite Structure Fabrication Publisher Society for the Advancement of Material and Process Engineering (Covina, CA, USA), 1991

490 Knights, M., Hot Runnners, PT, Sep 2003

491 New Single-Site Technology Produces LLDPEs for Film, Injection, and Rotomolding, PT, Sep 2005

492 Muller, J et all., Ten Myths About Gear Lubrication, SPE Extrusion Division Newsletter, Vol 29, No 3, Winter 2003

References 595 Chapters 1 to 3

Murphy, J., Additives for Plastics Handbook, 2nd Edition, Elsevier Advanced Technology, 2001