Polyurethane is currently used for automotive applications such as bumper beams, hoods, body panels, etc.. Polyurethane can be a thermosetting or thermoplastic resin, depending on the fu
Trang 1which isocyanate and polyol are generally mixed in a ratio of 1:1 in a reaction chamber and then rapidly injected into a closed mold containing short or long fiber reinforcements RRIM and SRIM processes are low-cost and high-volume production methods The automotive industry is a big market for these processes Polyurethane is currently used for automotive applications such as bumper beams, hoods, body panels, etc Unfilled polyurethane is used for various applications, including truck wheels, seat and furniture cushions, mattress foam, etc Polyurethane is also used for wear and impact resistance coatings
Polyurethane can be a thermosetting or thermoplastic resin, depending on the functionality of the selected polyols Thermoplastic-based polyurethane contains linear molecules, whereas thermoset-based resin contains cross-linked molecules
Polyurethane is obtained by the reaction between polyisocyanate and a polyhydroxyl group There are a variety of polyurethanes available by select-ing various types of polyisocyanate and polyhydroxyl select-ingredients Polyure-thane offers excellent wear, tear, and chemical resistance, good toughness, and high resilience
2.3.2 Thermoplastic Resins
Thermoplastic materials are, in general, ductile and tougher than thermoset materials and are used for a wide variety of nonstructural applications with-out fillers and reinforcements Thermoplastics can be melted by heating and solidified by cooling, which render them capable of repeated reshaping and reforming Thermoplastic molecules do not cross-link and therefore they are flexible and reformable Thermoplastics can be either amorphous or
are randomly arranged; whereas in the crystalline region of semi-crystalline plastics, molecules are arranged in an orderly fashion It is not possible to have 100% crystallinity in plastics because of the complex nature of the
Their lower stiffness and strength values require the use of fillers and rein-forcements for structural applications Thermoplastics generally exhibit poor creep resistance, especially at elevated temperatures, as compared to thermo-sets They are more susceptible to solvents than thermothermo-sets Thermoplastic resins can be welded together, making repair and joining of parts more simple than for thermosets Repair of thermoset composites is a complicated process, requiring adhesives and careful surface preparation Thermoplastic compos-ites typically require higher forming temperatures and pressures than com-parable thermoset systems Thermoplastic composites do not enjoy as high
a level of integration as is currently obtained with thermosetting systems The higher viscosity of thermoplastic resins makes some manufacturing pro-cesses, such as hand lay-up and tape winding operations, more difficult As
a consequence of this, the fabrication of thermoplastic composite parts have drawn a lot of attention from researchers to overcome these problems
Trang 2which isocyanate and polyol are generally mixed in a ratio of 1:1 in a reaction chamber and then rapidly injected into a closed mold containing short or long fiber reinforcements RRIM and SRIM processes are low-cost and high-volume production methods The automotive industry is a big market for these processes Polyurethane is currently used for automotive applications such as bumper beams, hoods, body panels, etc Unfilled polyurethane is used for various applications, including truck wheels, seat and furniture cushions, mattress foam, etc Polyurethane is also used for wear and impact resistance coatings
Polyurethane can be a thermosetting or thermoplastic resin, depending on the functionality of the selected polyols Thermoplastic-based polyurethane contains linear molecules, whereas thermoset-based resin contains cross-linked molecules
Polyurethane is obtained by the reaction between polyisocyanate and a polyhydroxyl group There are a variety of polyurethanes available by select-ing various types of polyisocyanate and polyhydroxyl select-ingredients Polyure-thane offers excellent wear, tear, and chemical resistance, good toughness, and high resilience
2.3.2 Thermoplastic Resins
Thermoplastic materials are, in general, ductile and tougher than thermoset materials and are used for a wide variety of nonstructural applications with-out fillers and reinforcements Thermoplastics can be melted by heating and solidified by cooling, which render them capable of repeated reshaping and reforming Thermoplastic molecules do not cross-link and therefore they are flexible and reformable Thermoplastics can be either amorphous or
are randomly arranged; whereas in the crystalline region of semi-crystalline plastics, molecules are arranged in an orderly fashion It is not possible to have 100% crystallinity in plastics because of the complex nature of the
Their lower stiffness and strength values require the use of fillers and rein-forcements for structural applications Thermoplastics generally exhibit poor creep resistance, especially at elevated temperatures, as compared to thermo-sets They are more susceptible to solvents than thermothermo-sets Thermoplastic resins can be welded together, making repair and joining of parts more simple than for thermosets Repair of thermoset composites is a complicated process, requiring adhesives and careful surface preparation Thermoplastic compos-ites typically require higher forming temperatures and pressures than com-parable thermoset systems Thermoplastic composites do not enjoy as high
a level of integration as is currently obtained with thermosetting systems The higher viscosity of thermoplastic resins makes some manufacturing pro-cesses, such as hand lay-up and tape winding operations, more difficult As
a consequence of this, the fabrication of thermoplastic composite parts have drawn a lot of attention from researchers to overcome these problems
Trang 3Material Selection Guidelines
3.1 Introduction
The behavior and performance of a product depend on the types of materials used in making the part There are more than 50,000 materials available for the design and manufacture of a product Every material cannot be a right choice for a given application; therefore, there is a need for suitable material selection Depending on the selection of a material, the design, processing, cost, quality, and performance of the product change Material selection becomes vital for civil and mechanical structures where material cost is almost 50% of the total product cost For microelectronic applications such
as computers, material cost is almost 5% of the product cost Because the volume used in civil and mechanical structures is very high, there are greater opportunities for material innovations
This chapter illustrates how material properties and systematic selection methods are important to quick and effective selection of a suitable material Cost vs property analysis, a weighted property comparison method, and expert systems are described as tools for material selections Once a suitable material is selected for an application, design and manufacturing consider-ations begin
3.2 The Need for Material Selection
With the technological advancements, new material systems and processes are being developed and are growing faster than ever before In the past, steel and aluminum were more dominant for product design This is no longer the case With growing awareness and customer needs, ignorance of opportunities offered by advanced material systems such as composite mate-rials can cause decreased competitiveness and can lead to loss of market