The sat skill exam 10 pptx

A coordinate point, also called an ordered pair, is a specific point on the coordinate plane with the first point representing the horizontal placement and the second point representing

■ In a square, diagonals have both the same length and intersect at 90-degree angles

Solid Figures, Perimeter, and Area

The SAT will give you several geometrical formulas

These formulas will be listed and explained in this sec-tion It is important that you be able to recognize the figures by their names and to understand when to use which formulas Don’t worry You do not have to mem-orize these formulas You will find them at the begin-ning of each math section on the SAT

To begin, it is necessary to explain five kinds of measurement:

1 Perimeter The perimeter of an object is simply

the sum of all of its sides

2 Area Area is the space inside of the lines

defin-ing the shape

3 Volume Volume is a measurement of a

three-dimensional object such as a cube or a rectangu-lar solid An easy way to envision volume is to think about filling an object with water The vol-ume measures how much water can fit inside

4 Surface Area The surface area of an object

meas-ures the area of each of its faces The total surface area of a rectangular solid is the double the sum

of the areas of the three faces For a cube, simply multiply the surface area of one of its sides by 6

5 Circumference Circumference is the measure of

the distance around a circle

Circumference

4

4 Surface area of front side = 16 Therefore, the surface area

of the cube = 16 ⴛ 6 = 96.

= Area

6

7

4

10 Perimeter = 6 + 7 + 4 + 10 = 27

B

C

A

D

AC = DB

and

AC DB

The following are formulas that will be given to you on the SAT, as well as the definitions of variables used Remember, you do not have to memorize them

r

l

w

h

b

A = lw

C = 2 π r

A = π r2

Cylinder

Rectangle Solid

h l

V = π r2h

w

r

h

V = lwh

C = Circumference

A = Area

r = Radius

l = Length

w = Width

h = Height

V = Volume

b = Base

A =12bh

Coordinate Geometry

Coordinate geometry is a form of geometrical opera-tions in relation to a coordinate plane A coordinate plane is a grid of square boxes divided into four

quad-rants by both a horizontal (x) axis and a vertical (y) axis.

These two axes intersect at one coordinate point, (0,0),

the origin A coordinate point, also called an ordered pair, is a specific point on the coordinate plane with the

first point representing the horizontal placement and the second point representing the vertical Coordinate

points are given in the form of (x,y).

Graphing Ordered Pairs

T HE X-COORDINATE

The x-coordinate is listed first in the ordered pair and

it tells you how many units to move to either the left or

to the right If the x-coordinate is positive, move to the right If the x-coordinate is negative, move to the left.

T HE Y-COORDINATE

The y-coordinate is listed second and tells you how many units to move up or down If the y-coordinate is positive, move up If the y-coordinate is negative, move down.

Example:

Graph the following points: (2,3), (3,–2), (–2,3), and (–3,–2)

Notice that the graph is broken up into four quad-rants with one point plotted in each one Here is a

chart to indicate which quadrants contain which ordered pairs based on their signs:

Lengths of Horizontal and Vertical Segments

Two points with the same y-coordinate lie on the same horizontal line and two points with the same x-coordinate

lie on the same vertical line The distance between a hor-izontal or vertical segment can be found by taking the absolute value of the difference of the two points

Example:

Find the length of A B and BC.

| 2 – 7 | = 5 = AB

| 1 – 5 | = 4 = BC

Distance of Coordinate Points

To find the distance between two points, use this vari-ation of the Pythagorean theorem:

d = (x2– x1)2+ (y2 + y1)2

Example:

Find the distance between points (2,3) and (1,–2)

(2,1)

(7,5) C

B A

Sign of Points Coordinates Quadrant (2,3) (+,+) I (–2,3) (–,+) II (–3,–2) (–,–) III (3,–2) (+,–) IV

( − 2,3) (2,3)

( − 3, − 2) (3, − 2)

d = (1 – 2)2 – 3)+ (–22

d = (1 + –2)2 + –32+ (–)2

d = (–1) (–5)2+2

d = 1 + 25

d = 26

Midpoint

To find the midpoint of a segment, use the following

formula:

Midpoint x = x1 +

2

x2

 Midpoint y = y1 +

2

y2



Example:

Find the midpoint of A B.

Midpoint x = 1 +25 = 62= 3

Midpoint y = 2 +210= 122= 6

Therefore, the midpoint of A B is (3,6).

Slope The slope of a line measures its steepness It is found by

writing the change in y-coordinates of any two points

on the line, over the change of the corresponding

x-coordinates (This is also known as rise over run.)

The last step is to simplify the fraction that results

Example:

Find the slope of a line containing the points (3,2) and (8,9)

9 8

– –

2 3

= 7

5 

Therefore, the slope of the line is 75 Note: If you know the slope and at least one point

on a line, you can find the coordinate point of other

points on the line Simply move the required units determined by the slope In the example above, from (8,9), given the slope 75, move up seven units and to the right five units Another point on the line, thus, is (13,16)

Important Information about Slope

■ A line that rises to the right has a positive slope and a line that falls to the right has a negative slope

■ A horizontal line has a slope of 0 and a vertical line does not have a slope at all—it is undefined

■ Parallel lines have equal slopes

■ Perpendicular lines have slopes that are negative

(3,2)

(8,9)

(5,10)

Midpoint

(1,2)

B

A

(2,3)

(1,–2)

Word Problems and Data Analysis

This section will help you become familiar with the word problems on the SAT and learn how to analyze data using specific techniques

Translating Words into Numbers

The most important skill needed for word problems is being able to translate words into mathematical oper-ations The following will assist you in this by giving you some common examples of English phrases and their mathematical equivalents

■ “Increase” means add.

Example:

A number increased by five = x + 5.

■ “Less than” means subtract.

Example:

10 less than a number = x – 10.

■ “Times” or “product” means multiply.

Example:

Three times a number = 3x.

■ “Times the sum” means to multiply a number

by a quantity.

Example:

Five times the sum of a number and three =

5(x + 3).

■ Two variables are sometimes used together.

Example:

A number y exceeds five times a number x

by ten

y = 5x + 10

■ Inequality signs are used for “at least” and “at most,” as well as “less than” and “more than.”

Examples:

The product of x and 6 is greater than 2.

x× 6 > 2

When 14 is added to a number x, the sum is less

than 21

x + 14 < 21 The sum of a number x and four is at least nine.

x + 4 ≥ 9

When seven is subtracted from a number x, the

difference is at most four

x – 7 ≤ 4

Assigning Variables in Word Problems

It may be necessary to create and assign variables in a word problem To do this, first identify an unknown and a known You may not actually know the exact value of the “known,” but you will know at least some-thing about its value

Examples:

Max is three years older than Ricky

Unknown = Ricky’s age = x.

Known = Max’s age is three years older

Therefore, Ricky’s age = x and Max’s age = x + 3.

Siobhan made twice as many cookies as Rebecca Unknown = number of cookies Rebecca made

= x.

Known = number of cookies Siobhan made = 2x.

Cordelia has five more than three times the number of books that Becky has

Unknown = the number of books Becky has = x.

Known = the number of books Cordelia has =

3x + 5.

Percentage Problems

There is one formula that is useful for solving the three types of percentage problems:

When reading a percentage problem, substitute the necessary information into the above formula based

on the following:

■ 100 is always written in the denominator of the percentage sign column

■ If given a percentage, write it in the numerator

position of the number column If you are not

given a percentage, then the variable should be

placed there

■ The denominator of the number column

repre-sents the number that is equal to the whole, or

100% This number always follows the word “of ”

in a word problem

■ The numerator of the number column represents

the number that is the percent

■ In the formula, the equal sign can be

inter-changed with the word “is.”

Examples:

Finding a percentage of a given number:

What number is equal to 40% of 50?

Solve by cross multiplying

100(x) = (40)(50) 100x = 2,000

1 1

0 0

0 0

x

= 2 1

,0 0

0 0 0



x = 20 Therefore, 20 is 40% of 50

Finding a number when a percentage is given:

40% of what number is 24?

Cross multiply:

(24)(100) = (40)(x) 2,400 = 40x

2, 4

4 0

00

= 4 4

0 0

x



60 = x Therefore, 40% of 60 is 24

Finding what percentage one number is of another:

What percentage of 75 is 15?

Cross multiply:

15(100) = (75)(x) 1,500 = 75x

1, 7

5 5 00

= 7 7

5 5

x



20 = x Therefore, 20% of 75 is 15

Ratio and Variation

A ratio is a comparison of two quantities measured in

the same units It is symbolized by the use of a colon—x:y.

Ratio problems are solved using the concept of multiples

Example:

A bag contains 60 red and green candies The ratio of the number of green to red candies is 7:8 How many of each color are there in the bag? From the problem, it is known that 7 and 8 share a multiple and that the sum of their prod-uct is 60 Therefore, you can write and solve the following equation:

7x + 8x = 60 15x = 60

1 1

5 5

x

= 6 1

0 5



x = 4

Therefore, there are (7)(4) = 28 green candies and (8)(4) = 32 red candies

Variation Variation is a term referring to a constant ratio in the

change of a quantity

■ A quantity is said to vary directly with another if

they both change in an equal direction In other words, two quantities vary directly if an increase

x

15

40 24

40

x