Configure the Winsock Buffer Size pcAnywhere All Windows Popular Use this registry item to set the size in bytes of TCP's Winsock buffer.. Compatibility with the OnNet 2.1 TCP/IP Stack p
Trang 1Configure the Winsock Buffer Size (pcAnywhere) (All Windows) Popular
Use this registry item to set the size in bytes of TCP's Winsock buffer Using a large value may increase the throughput of connections where the delay is large in relation to the bandwidth This includes Internet, ISDN, RAS, dial-up networking, WAN and satellite connections
Compatibility with the OnNet 2.1 TCP/IP Stack (pcAnywhere) (All Windows)
This registry item resolves an issue where pcAnywhere displayed the wrong host
IP address when using FTP's OnNet 2.1 TCP/IP stack
Prompt for TCP/IP Host (pcAnywhere) (All Windows)
This registry item allows a TCP/IP remote to specify an IP address or name when you leave the "Host To Connect To" field blank
Adapter Binding Mode (pcAnywhere) (All Windows)
This registry item allows a waiting host to bind to a new adapter, such as a dial-up adapter, without reinitializing the host
TCP/IP Host Binding Mode (pcAnywhere) (All Windows)
This registry item allows you to specify whether the host will wait on the first TCP/IP address given by the operating system, or whether it will wait on the TCP/IP index as indicated by TCPIPHostAddressIndex
Specify Host Mode TCP/IP Address (pcAnywhere) (All Windows)
This registry item allows you to specify which TCP/IP address index the host will wait on
Multicast Packet Delay (pcAnywhere) (All Windows)
This sets the delay in milliseconds between each send This is useful if multicast error correction is disabled
Configure the Multicast Data Port (pcAnywhere) (All Windows)
This setting selects the port that the multicast data is sent to
Multicast Error Correction (pcAnywhere) (All Windows)
This sets the level of error correction used on the host The host specifies which level of error correction the remotes will use
Multicast Adapter Selection (pcAnywhere) (All Windows)
Use this registry item for a multihomed, multicast host that is not binding to the
Trang 2correct network card This can be why none of the remotes receive the multicast packets
Configure Multicast Send and Receive Buffers (pcAnywhere) (All Windows)
These registry items set the number of receive and send buffers when using an error correction multicast session For slow remotes, a larger value may lead to less data loss
Multicast Maximum Transmission Unit (pcAnywhere) (All Windows)
This registry item sets the Maximum Transmission Unit (MTU) in bytes The MTU is the maximum bytes that may be sent as one IP multicast packet
Multicast Winsock Receive Buffer (pcAnywhere) (All Windows)
This registry item sets the size in bytes of the Winsock receive buffer
Ignore DSR on Serial Devices (pcAnywhere) (All Windows)
Use this item for modems or other serial devices that do not initialize correctly because their DSR is not initially set It is also useful if the modem connection does not have a DSR line
Change Serial 56K Connection Speed (pcAnywhere) (All Windows)
Use this item when a serial connection can be made at 38,400 bps and 115,000 bps, but not at 57,600 bps
TAPI Modem Errors (pcAnywhere) (All Windows)
Each time you add a TAPI modem, it generates a unique TAPI Permanent Line ID which is stored in pcANYWHERE32's connection items If you no longer have a modem with this unique ID, pcANYWHERE32 displays an error message This registry key tells pcANYWHERE32 how to handle this situation
Configure IPX Search Mode (pcAnywhere) (All Windows)
This registry item enables the SAP method of network search instead of using the bindery when making IPX connections
Hide the Record Session Button (pcAnywhere) (All Windows)
Use this registry key to hide the Record Session icon from the remote session
toolbar
Remote Printer Inactivity Time-out (pcAnywhere) (All Windows)
Use this setting if a print job is being separated into multiple jobs during remote printing This item sets the inactivity time-out for the remote printing facility
Trang 3Configure Legacy Remote Print Mode (pcAnywhere) (All Windows)
This setting specifies the default print destination when connecting to a
pcAnywhere 2.0 or 5.0 host
Show Full Screen Reminder Message (pcAnywhere) (All Windows)
This setting turns the Full Screen Reminder Message on or off
Host Connection Time-Out (pcAnywhere) (All Windows)
If pcAnywhere host does not respond, hang up This is useful for scripts that call systems where a modem will answer, but the pcAnywhere host may not be
running
Run Smart Setup (pcAnywhere) (All Windows)
This setting controls whether SmartSetup is run when pcAnywhere is loaded for the first time
Run the pcAnywhere Service in Stealth Mode (pcAnywhere) (All Windows)
Use this setting to hide the Host Waiting icon and Waiting dialog
Use Computer Name Instead of Caller Name (pcAnywhere) (All Windows)
When this key is set, if a host has the "Prompt to confirm connection" option
checked, the host computer's prompt dialog will display the remote's computer name instead of the caller's name when a connection is made
Wait for Call After Disconnect (pcAnywhere) (All Windows)
If enabled, the host will not wait for a call when the remote disconnects
Configure Persistent Cache (pcAnywhere) (All Windows)
This setting turns pcAnywhere's persistent cache feature on or off
Multi-Processor Options (pcAnywhere) (All Windows)
This registry item specifies which processors pcANYWHERE32 8.0 will run on
Prompt If Logged Out (pcAnywhere) (All Windows)
This registry key allows you to specify how pcANYWHERE32 will handle a
remote connection when the pcANYWHERE32 host is waiting at the Windows NT login screen and the "Prompt On Connection" and "Disconnect On Timeout"
options have been checked
Trang 4Speed Send File Size Limits (pcAnywhere) (All Windows)
The minimum size a file must be for SpeedSend to work is 10K You can change this value
Confirm File Send (pcAnywhere) (All Windows)
When this setting is disabled, the remote does not display the confirm prompt when sending a file
Confirm File Delete (pcAnywhere) (All Windows)
When this setting is disabled, the remote does not display the confirm prompt when deleting a file
Home : Software : Windows CE
Remove the Menu Sliding Animation (Pocket PC 2002)
This tweak will remove the animated sliding menu effect found on the Pocket PC
Change Internet Explorer to Appear as a Different Version (Pocket PC)
These settings allows you to change the way Pocket Internet Explorer appears to remote web sites As some web site base the availability of SSL and other display parameters on this version information
Control Windows Animation on Handheld Devices (Pocket PC)
The animation feature can make animated Windows look good, but it can also substantially slow down your handheld device This setting allows you to control whether the function is enabled or disabled
Modify the Graphic Cache Size (Pocket PC)
This setting controls the size of the glyph cache, by increasing this value you can increase graphics rendering speed by several times
Automatically Hide the Taskbar (Pocket PC)
This setting controls whether the taskbar should be automatically hidden when not being accessed
Control Script Errors on Pocket Internet Explorer (Pocket PC)
This setting allow you to control whether script errors generate a warning message
on Pocket Internet Explorer
Trang 5Enable ClearType Technology (Pocket PC)
This setting controls the use of Clear Type text when rendering HTML documents with Pocket Internet Explorer
Home : Software : Windows Messenger
Disable Background Notification Balloon in Messenger (All Windows)
This tweak can be used to disable the popup message that notifies the user that Windows (MSN) Messenger is still running in the background when you close it
Remove Windows Messenger from Outlook Express (All Windows) Popular
This tweak is used to remove MSN Instant Messenger functionality and integration from Outlook Express
Disable Windows Messenger in Outlook (All Windows)
This setting can be used to disable the integration of Windows (MSN) Messenger
so that is does not start when using Microsoft Outlook
Change the Messenger Warning Message (All Windows)
When you start a chat in Windows Messenger a warning is shown that says "Never give out your password or credit card number in an instant message conversation" This tweak allows you to customize this message for example to display your company chat policy
Disable SSDP Discovery in Windows Messenger (Windows 2000/XP)
Windows Messenger uses the Simple Service Discovery Protocol (SSDP) to
attempt to locate upstream Internet gateways on UDP port 1900 This tweak allows you to disable Universal Plug and Play Network Address Translation discovery to reduce bandwidth and increase security
Disable MSN Instant Messenger (All Windows) Popular
This restriction is used to disable the ability to run the Microsoft MSN Instant Messenger client
Remove Windows Messenger from Internet Explorer (All Windows)
This tweak can be used to remove the integration of Windows Messenger into Internet Explorer It will remove both the toolbar icon and Tools menu item