CHEMISTRY, ELECTROCHEMISTRY, ANDELECTROCHEMICAL APPLICATIONS Contents Aluminum Carbon Iron Hydrogen Lead Lithium Manganese Nickel Oxygen Platinum Group Elements Silver Zinc Aluminum Q Li
Trang 1CHEMISTRY, ELECTROCHEMISTRY, AND
ELECTROCHEMICAL APPLICATIONS
Contents
Aluminum
Carbon
Iron
Hydrogen
Lead
Lithium
Manganese
Nickel
Oxygen
Platinum Group Elements
Silver
Zinc
Aluminum
Q Li, JO Jensen, and NJ Bjerrum,Technical University of Denmark, Lyngby, Denmark
& 2009 Elsevier B.V All rights reserved.
Introduction
Aluminum is the most abundant metallic element, making
up about 8% by weight of the Earth’s crust It is a
silvery-white metal and belongs to group III of the periodic table
Its atomic number is 13 and atomic weight 26.981 54 Pure
aluminum is soft and ductile However, it can be alloyed
with small amounts of copper, magnesium, and silicon to
increase its strength and impart a number of useful
prop-erties such as high strength, good ductility, and low density
The most common aluminum alloy, A6061, for example,
contains copper (0.15–0.6%), magnesium (0.8–1.2%), silicon
(0.4–0.8%), zinc (o0.25%), and iron (o0.7%), and is
widely used as a vital structural component in aerospace,
automotive, railroad, and other industrial applications
Chemically, aluminum is very reactive Whenever a
freshly created aluminum surface is exposed to air or water
at room temperature, an oxide film forms immediately and
grows to a thickness of about 5 nm in air and to a somewhat
greater thickness in water This oxide layer is impervious
and adherent to the metal surface, protecting aluminum
from further corrosion It is this oxide layer that makes
aluminum remarkable for its corrosion and wear resistance
Aluminum surface coatings onto other metallic substrates
are a well-known technology for corrosion protection
Anodizing, an electrolytic passivation process to increase
the thickness of the natural oxide layer on the surface of
metal parts, forms an important part of aluminum elec-trochemistry and offers better use of the oxide layer The electrochemically prepared oxide layers can be either porous or barrier type, the former providing corrosion re-sistance and allowing for coloring the surface with organic dyes, pigment impregnation, or electrolytic deposition of other metals and the latter being dielectric and character-izing the capacity of aluminum electrolyte capacitors From an energy storage and conversion point of view, aluminum is a very attractive anode material The for-mation of the oxide surface layer on an aluminum anode, however, causes a significant decrease in the reversible electrode potential as well as a time lag in reaching the operating potential of a battery Activation of the alu-minum electrode and depression of the parasitic cor-rosion are the main focus for developing aluminum alloys
as anodes for batteries as well as for cathodic protection Electrochemically, aluminum belongs to the group of metals with very negative electrode potentials Electro-chemical deposition of aluminum from any aqueous media
is therefore impossible owing to the hydrogen evolution at the cathode Consequently, electrolytic production, refining, and plating of aluminum as well as development of re-chargeable aluminum batteries require nonaqueous elec-trolytes, that is, either molten salts or organic electrolytes This article starts with a brief summary of chemistry of aluminum with emphasis on its behavior in different
695