Heat Transfer Performance of Internally Finned Tubes in Turbulent Flow, in Advances in Heat Transfer, ASME, New York, pp... Enhancement of Condensation Heat Transfer on a Finned Tube Usi
Trang 11 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
[1107],(79)
Lines: 1646 to 1682
———
12.0pt PgVar
———
Normal Page PgEnds: TEX [1107],(79)
Bergles, A E., Junkhan, G H., and Webb, R L (1979) Energy Conservation via Heat
Trans-ferEnhancement, Report COO-4649-5, Heat Transfer Laboratory, Iowa State University,
Ames, IA
Bergles, A E., Collier, J G., Delhaye, J M., Hewitt, G F., and Mayinger, F (1981) Two-Phase
Flowand Heat Transfer in the Power and Process Industries, Hemisphere Publishing,
Washington, DC
Bergles, A E., Nirmalan, V., Junkhan, G H., and Webb, R L (1983) Bibliography of
Aug-mentation of Convective Heat and Mass Transfer, II, Report HTL-31,
ISU-ERI-Ames-84221, Heat Transfer Laboratory, Iowa State University, Ames, IA.
Bergles, A E., Jensen, M K., Somerscales, E F C., and Manglik, R M (1991) Literature Review of Heat TransferEnhancement Technology forHeat Exchanges in Gas-Fired
Ap-plications, Report GRI 91-0146, Gas Research Institute, Chicago.
Bergles, A E., Jensen, M K., and Shome, B (1995) Bibliography on Enhancement of
Convec-tive Heat and Mass Transfer, Report HTL-23, Heat Transfer Laboratory, Rensselaer
Poly-technic Institute, Troy, NY
Bergles, A E., Jensen, M K., and Shome, B (1996) The Literature on Enhancement of
Convective Heat and Mass Transfer, J Enhanced Heat Transfer, 4(1), 1–6.
Bhatnagar, R K., and Manglik, R M (2002) Enhanced Heat and Mass Transfer Litera-ture: Case for a Digital Library with Intelligent Information Retrieval, Thermal Fluids and
Thermal Processing Laboratory, Report TFTPL-CS1, University of Cincinnati, Cincinnato,
OH
Bhattacharya, S C., and Harrison, D (1976) Heat Transfer in a Pulsed Fluidized Bed, Trans.
Inst Chem Eng., 54, 281–286.
Blatt, T A., and Adt, R R (1963) The Effects of Twisted Tape Swirl Generators on the Heat
Transfer Rate and Pressure Drop of Boiling Freon 11 and Water, ASME-63-WA-42, ASME,
New York
Blomgren, O C., Sr., and Blomgren, O C., Jr (1972) Method and Apparatus for Cooling the Workpiece and/or the Cutting Tools of a Machining Apparatus, U.S patent 3,670,606
Boling, C., Donovan, W J., and Decker, A S (1953) Heat Transfer of Evaporating Freon with
Inner-Fin Tubing, Refrig Eng., 61, 1338–1340, 1384.
Bologa, M K., Pushkov, V V., and Berkov, A B (1985) Electric Field Induced Heat Transfer
Enhancement in a Gas–Solid Suspension Heat Exchanger, Int J Heat Mass Transfer, 20,
1245–1255
Bonilla, C F., Grady, J J., and Avery, G A (1965) Pool Boiling Heat Transfer from Scored
Surfaces, Chem Eng Prog Symp Ser., 61(57), 281–288.
Brauer, H (1961) Str¨omungswiderstand und W¨arme¨ubergang bei Ringspalten mit rauhen
Rohren, Atomkernenergie, 4, 152–159.
Briggs, A., and Rose, J W (1994) Effect of Fin Efficiency on a Model for Condensation
Heat Transfer on a Horizontal Integral-Fin Tube, Int J Heat Mass Transfer, 37, 457–
463
Brodov, Y M., Salev’yev, R Z., Permayakov, V A., Kuptsov, V K., and Gal’perin, A G
(1977) The Effect of Vibration on Heat Transfer and Flow of Condensing Steam on a
Single Tube, Heat Transfer Sov Res., 9(1), 153–155.
Carnavos, T C (1979a) Heat Transfer Performance of Internally Finned Tubes in Turbulent
Flow, in Advances in Heat Transfer, ASME, New York, pp 61–67.
Trang 21 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
[1108],(80)
Lines: 1682 to 1725
———
* 15.0pt PgVar
———
Custom Page (9.0pt) PgEnds: TEX [1108],(80)
Carnavos, T C (1979b) Cooling Air in Turbulent Flow with Internally Finned Tubes, Heat
Transfer Eng., 1(2), 41–46.
Carnavos, T C (1980) An Experimental Study: Condensing R-11 on Augmented Tubes,
ASME-80-HT-54, ASME, New York.
Cary, J D., and Mikic, B B (1973) The Influence of Thermocapillary Flow on Heat Transfer
in Film Condensation, J Heat Transfer, 95, 20–24.
Celata, G P., Cumo, M., and Mariani, A (1994) Enhancement of Water Subcooled Flow
Boiling CHF in Tubes with Helically Coiled Wires, Int J Heat Mass Transfer, 37(1), 53–
67
Champagne, P R., and Bergles, A E (2001) Development and Testing of a Novel, Variable-Roughness Technique to Enhance, on Demand, Heat Transfer in a Single-Phase Heat
Ex-changer, J Enhanced Heat Transfer, 8(5), 341–352.
Chamra, L M., Webb, R L., and Randlett, M R (1996) Advanced Micro-fin Tubes for
Condensation, Int J Heat Mass Transfer, 39(9), 1839–1846.
Chandran, R., and Watson, F A (1976) Condensation on Static and Rotating Pinned Tubes,
Trans Inst Chem Eng., 54, 65–72.
Chen, Y., and Liu, Z (1999) Study on Enhancement of Nucleate Boiling Heat Transfer by
EHD Effect, J Enhanced Heat Transfer, 6(6), 457–466.
Cheng, K C., and Yuen, F P (1987) Flow Visualization Studies on Secondary Flow Patterns
in Straight Tubes Downstream of a 180 deg Bend and in Isothermally Heated Horizontal
Tubes, J Heat Transfer, 109(1), 49–54.
Chhabra, R P., and Richardson, J F (1999) Non-Newtonian Flow in the Process Industries,
Butterworth-Heinemann, Oxford
Chiang, R (1993) Heat Transfer and Pressure Drop during Evaporation and Condensation of
R-22 in 7.5 mm and 10 mm DiameterAxial and Helical Grooved Tubes, AIChE Symp Ser.,
89(295), 205–210
Chien, L.-H., and Webb, R L (1998) A Nucleate Boiling Model for Structured Enhanced
Surfaces, Int J Heat Mass Transfer, 41(14), 2183–2195.
Cho, Y I., and Hartnett, J P (1980) Heat Transfer Performance of Concentrated Polyethylene
Oxide and Polyacrylamide Solutions, AIChE J., 26, 250–256.
Choi, H Y (1961) Electrohydrodynamic Boiling Heat Transfer, Report 63-12-1, Department
of Mechanical Engineering, Tufts University, Medford, MA
Chu, R C., and Chrysler, G M (1998) Recent Developments of Cooling Technology and
Thermal Design for Leading-Edge Electronic Products, Int J Transp Phenomema, 1(1),
31–40
Chu, R C., and Moran, K P (1977) Method for Customizing Nucleate Boiling Heat Transfer from Electronic Units Immersed in Dielectric Coolant, U.S patent 4,050,507
Chu, R C., Takano, K., Nishio, S., and Tanasawa, I (2000) Study on Enhancement of
Con-densation Heat Transfer Using Electric Field, Heat Transfer Asian Res., 29(4), 269–279.
Chu, R C., Nishio, S., and Tanasawa, I (2001) Enhancement of Condensation Heat Transfer
on a Finned Tube Using an Electric Field, J Enhanced Heat Transfer, 8(4), 215–229.
Chukhman, G I (1972) The Internal Heat Transfer in Evaporative Air Coolers with Flow
Turbulization, Heat Transfer Sov Res., 4(4), 67–70.
Cie´sli´nski, J T (2002) Nucleate Pool Boiling on Porous Metallic Coatings, Exp Therm Fluid
Sci., 25(7), 557–564.
Trang 31 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
[1109],(81)
Lines: 1725 to 1762
———
6.0pt PgVar
———
Custom Page (9.0pt) PgEnds: TEX [1109],(81)
Collins, W M., and Dennis, S C R (1975) The Steady Motion of a Viscous Fluid in a Curved
Tube, Q J Mech Appl Math., 28, 133–156.
Cooper, P (1990) EHD Enhancement of Nucleate Boiling, J Heat Transfer, 112, 458–464.
Cornaro, C., Fleischer, S A., Rounds, M., and Goldstein, J R (2001) Jet Impingement
Cooling of a Convex Semi-cylindrical Surface, Int J Thermal Sci., 40(10), 890–898.
Cox, R B., Pascale, A S., Matta, G A., and Stromberg, K S (1969) Pilot Plant Tests and
Design Study of a 2.5 MGD Horizontal-Tube Multiple-Effect Plant, Report 492, Office of
Saline WaterResearch and Development, Washington, DC
Cox, R B., Matta, G A., Pascale, A S., and Stomberg, K G (1970) Second Report on
Horizontal Tubes Multiple-Effect Process Pilot Plant Tests and Design, Reprot 592, Office
of Saline WaterResearch and Development, Washington, DC
Cumo, M., Farello, G E., and Ferrari, G (1972) The Influence of Curvature in Post Dry-Out
Heat Transfer, Int J Heat Mass Transfer, 15, 2045–2062.
Czikk, A M., and O’Neill, P S (1979) Correlation of Nucleate Boiling from Porous Metal
Films, in Advances in Enhanced Heat Transfer, (Chenoweth, J M., Kaellis, J., Michel, J W.,
and Shenkman, S., eds.), ASME, New York, pp 53–60
Dahl, M M., and Erb, L D (1976) Liquid Heat Exchanger Interface and Method, U.S patent 3,990,862
Dalle Donne, M (1978) Heat Transferin Gas Cooled Fast ReactorCores, Ann Nucl Energy,
5, 439–453
Dalle Donne, M., and Meyer, L (1977) Turbulent Convective Heat Transfer from Rough
Surfaces with Two-Dimensional Rectangular Ribs, Int J Heat Mass Transfer, 20, 583–
620
Darabi, J., Ohadi, M M., and Dessiatoun, S V (2000) Compound Augmentation of Pool
Boiling on Three Selected Commercial Tubes, J Enhanced Heat Transfer, 7(5), 347–360.
Das, A K., Incheck, G A., and Marto, P J (1999) The Effect of Fin Height during Steam
Condensation on a Horizontal Stainless Steel Integral-Fin Tube, J Enhanced Heat Transfer,
6(2–4), 237–250
Das, A K., Kilty, H P., Marto, P J., Kumar, A., and Andeen, G B (2000) Dropwise Con-densation of Steam on Horizontal Corrugated Tubes Using an Organic Self-Assembled
MonolayerCoating, J Enhanced Heat Transfer, 7(2), 109–123.
Date, A W., and Singham, J R (1972) Numerical Prediction of Friction and Heat Transfer Characteristics of Fully Developed Laminar Flow in Tubes Containing Twisted Tapes,
ASME-72-HT-17, ASME, New York.
Davidson, J H., Kulacki, F A., and Dunn, P F (1987) Convective Heat Transfer with Electric
and Magnetic Fields, in Handbook of Single-Phase Convective Heat Transfer, (Kakac¸, S.,
Shah, R K., and Aung, W., eds.), Wiley, New York, Chap 9
Dean, W R (1927) Note on the Motion of Fluid in a Curved Pipe, Philos Mag., Ser 7, 4,
208–233
Dean, W R (1928) The Stream Line Motion of Fluid in a Curved Pipe, Philos Mag., Ser 7,
5(30), 673–695
Dippery, D F., and Sabersky, R H (1963) Heat and Momentum Transfer in Smooth and
Rough Tubes at Various Prandtl Numbers, Int J Heat Mass Transfer, 6, 329–353.
Dong, Y., Huixiong, L., and Tingkuan, C (2001) Pressure Drop, Heat Transfer and
Perfor-mance of Single-Phase Turbulent Flow in Spirally Corrugated Tubes, Exp Therm Fluid
Sci., 24, 131–138.
Trang 41 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
[1110],(82)
Lines: 1762 to 1800
———
9.0pt PgVar
———
Custom Page (10.0pt) PgEnds: TEX
[1110],(82)
Dreitser, G A., Levin, E S., and Mikhailov, A V (1988) Intensification of Heat Transfer in
the Condensation of WaterVaporon Horizontal Tube with AnnularGrooves, J Eng Phys.,
55(5), 789–793
Driˇzius, M.-R., Shkema, R K., and Shlanˇciauskas, A A (1978) Boiling Crisis in Swirled
Flow of Waterin Pipes, Heat Transfer Sov Res., 10(4), 1–7.
Durant, W S., and Mirshak, S (1959) Roughening of Heat Transfer Surfaces as a Method of
Increasing Heat Flux at Burnout, E.I Dupont de Nemours and Co., Savannah, GA.
Durant, W S., Towell, R H., and Mirshak, S (1965) Improvement of Heat Transfer to Water
Flowing in an Annulus by Roughening the Heated Wall, Chem Eng Prog Symp Ser.,
60(61), 106–113
Ebadian, M A., and Dong, Z F (1998) Forced Convection, Internal Flow in Ducts, in
Hand-book of Heat Transfer, 3rd ed., (Rohsenow, W M., Hartnett, J P., and Cho, Y I., eds.),
McGraw-Hill, New York, Chap 5
Ebisu, T., and Torikoshi, K (1998) Experimental Study on Evaporation and Condensation
Heat Transfer Enhancement for R407C Using Herringbone Heat Transfer Tube, ASHRAE
Trans., 104, Pt 2, 1044–1052.
Eckels, S J., Doerr, T M., and Pate, M B (1994a) Heat Transfer and Pressure Drop of R-134a
and Ester Lubricant Mixtures in a Smooth and a Micro-fin Tube, I: Evaporation, ASHRAE
Trans., 100(2), 265–281.
Eckels, S J., Doerr, T M., and Pate, M B (1994b) Heat Transfer and Pressure Drop of R-134a
and Ester Lubricant Mixtures in a Smooth and a Micro-fin tube, II: Condensation, ASHRAE
Trans., 100(2), 283–294.
Edwards, D P., and Jensen, M K (1994) An Investigation of Turbulent Flow and Heat
Trans-ferin Longitudinally Finned Tubes, Report HTL-18, Heat Transfer Laboratory, Rensselaer
Polytechnic Institute, Troy, NY
Edwards, D A., Brenner, H., and Wassan, D T (1991) Interfacial Transport Processes and Rheology, Butterworth-Heinemann, Boston, MA
Ekkad, S V., and Han, J C (1997) Detailed Heat Transfer Distributions in Two-Pass Square
Channels with Rib Turbulators, Int J Heat Mass Transfer, 40, 2525–2537.
Ekkad, S V., Pamula, G., and Acharya, S (2000) Influence of Crossflow-Induced Swirl and
Impingement on Heat Transfer in an Internal Coolant Passage of a Turbine Airfoil, J Heat
Transfer, 122(3), 587–597.
Elenbaas, W (1942) Heat Dissipation of Parallel Plates by Free Convection, Physica, 9(1),
1–28
Eliades, V., Nikitopoulos, E D., and Acharya, S (2001) Mass-Transfer Distribution in
Ro-tating, Two-Pass, Ribbed Channels with Vortex Generators, J Thermophys Heat Transfer,
15(3), 266–274
Elsdon, R., and Shearer, C J (1977) Heat Transfer in Gas Fluidized Bed Assisted by an
Alternating Electric Field, Chem Eng Sci., 32, 1147–1153.
Esen, E B., Obot, N T., and Rabas, T J (1994) Enhancement, I: Heat Transfer and Pressure
Drop Results for Air Flow through Passages with Spirally Shaped Roughness, J Enhanced
Heat Transfer, 1(2), 145–156.
Eustice, J (1911) Experiments on Stream-Line Motion in Curved Pipes, Proc R Soc., A85,
119–131
Evans, L B., and Churchill, S W (1963) The Effect of Axial Promoters on Heat Transfer and
Pressure Drop inside a Tube, Chem Eng Prog Symp Ser., 41(59), 36–46.
Trang 51 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
[1111],(83)
Lines: 1800 to 1841
———
5.0pt PgVar
———
Custom Page (10.0pt) PgEnds: TEX
[1111],(83)
Fan, L T., Lin, S T., and Azer, N Z (1978) Surface Renewal Model of Condensation Heat
Transfer in Tubes with In-Line Static Mixers, Int J Heat Mass Transfer, 21, 849–854.
Fand, R M (1965) The Influence of Acoustic Vibrations on Heat Transfer by Natural
Con-vection from a Horizontal Cylinder to Water, J Heat Transfer, 87, 309–310.
Fand, R M., and Kaye, J (1961) The Influence of Sound on Free Convection from a Horizontal
Cylinder, J Heat Transfer, 83, 133.
Fand, R M., and Peebles, E M (1962) A Comparison of the Influence of Mechanical and
Acoustical Vibrations on Free Convection from a Horizontal Cylinder, J Heat Transfer,
84, 268–270
Fand, R M., Roos, J., Cheng, P., and Kaye, J (1962) The Local Heat-Transfer Coefficient
around a Heated Horizontal Cylinder in an Intense Sound Field, J Heat Transfer, 84, 245–
250
Feinstein, L., and Lundberg, R E (1963) Study of Advanced Techniques for Cooling Very
High PowerMicrowave Tubes, Report RADC-TDR-63-242, Rome AirDevelopment
Cen-ter, Rome, NY
Fenner, G W., and Ragi, E (1979) Enhanced Tube Inner Surface Heat Transfer Device and Method, U.S patent 4,154,291
Fletcher, L S., and Andrews, M J (1994) Technical/Market Assessment of Heat Exchanger
Technology for Users of Natural Gas, Report GRI-94/0248, Gas Research Institute,
Chi-cago
Fossa, M., and Tagliafico, L A (1995) Experimental Heat Transfer of Drag-Reducing
Poly-mer Solutions in Enhanced Surface Heat Exchangers, Exp Therm Fluid Sci., 10, 221–
228
Fraas, A P (1989) Heat Exchanger Design, 2nd ed., Wiley, New York.
Fujie, K., Itoh, N., Innami, T., Kimura, H., Nakayama, N., and Yanugidi, T (1977) Heat Transfer Pipe, U.S patent 4,044,797
Fujii, T (1995) Enhancement to Condensing Heat Transfer: New Developments, J Enhanced
Heat Transfer, 2(1/2), 127–137.
Fujii, M., Nishiyama, E., and Yamanaka, G (1979) Nucleate Pool Boiling Heat Transfer from
Microporous Heating Surface, in Advances in Enhanced Heat Transfer, J M Chenoweth
et al., eds., ASME, New York, pp 45–51
Fujikake, J (1980) Heat TransferTube forUse in Boiling Type Heat Exchangers and Method
of Producing the Same, U.S patent 4,216,826
Fuls, G M., and Geiger, G E (1970) Effect of Bubble Stabilization on Pool Boiling Heat
Transfer, J Heat Transfer, 97, 635–640.
Gaertner, R F (1967) Methods and Means for Increasing the Heat Transfer Coefficient be-tween a Wall and Boiling Liquid, U.S patent 3,301,314
Gambill, W R., Bundy, R D., and Wansbrough, R W (1961) Heat Transfer, Burnout, and
Pressure Drop for Water in Swirl Flow Tubes with Internal Twisted Tapes, Chem Eng.
Prog Symp Ser., 57(32), 127–137.
Gao, X., and Sund´en, B (2001) Heat Transfer and Pressure Drop Measurements in
Rib-Roughened RectangularDucts, Exp Therm Fluid Sci., 24, 25–34.
Garimella, S., and Christensen, R N (1995a) Heat Transfer and Pressure Drop Characteristics
of Spirally Fluted Annuli, I: Hydrodynamics, J Heat Transfer, 117, 54–60.
Garimella, S., and Christensen, R N (1995b) Heat Transfer and Pressure Drop Characteristics
of Spirally Fluted Annuli, II: Heat Transfer, J Heat Transfer, 117, 61–68.
Trang 61 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
[1112],(84)
Lines: 1841 to 1887
———
7.0pt PgVar
———
Long Page PgEnds: TEX [1112],(84)
Gasljevic, K., and Matthys, E F (1997) Experimental Investigation of Thermal and
Hydro-dynamic Development Regions for Drag-Reducing Surfactant Solutions, J Heat Transfer,
119, 80–88
Gaspari, G P., and Cattadori, G (1994) Subcooled Flow Boiling in Tubes with and without
Turbulence Promoters, Exp Therm Fluid Sci., 8, 28–34.
Glicksman, L R., Mikic, B B., and Snow, D F (1973) Augmentation of Film Condensation
on the Outside of Horizontal Tubes, AIChE J., 19, 636–637.
Gnielinski, V (1986) Correlations for the Pressure Drop in Helically Coiled Tubes, Int Chem.
Eng., 26(1), 36–44.
Gomelauri, V I., and Magrakvelidze, T S (1978) Mechanism of Influence of Two
Dimen-sional Artificial Roughness on Critical Heat Flux in Subcooled Water Flows, Therm Eng.,
25(2), 1–3
Gregorig, R (1954) Hautkondensation an Feingewellten Oberfl¨achen bei Ber¨ucksichtigung
derOberfl¨achenspannungen, Z Angew Math Phys., 5, 36–49.
Griffith, P (1985) Dropwise Condensation, in Handbook of Heat Transfer Fundamentals,
W M Rohsenow, J P Hartnett, and E N Ganic, eds., McGraw-Hill, New York, Chap
11, Pt 2
Griffith, P., and Wallis, J D (1960) The Role of Surface Conditions in Nucleate Boiling,
Chem Eng Prog Symp Ser., 56(49), 49–63.
Groehn, H G., and Scholz, F (1976) Heat Transfer and Pressure Drop of In-Line Tube Banks
with Artificial Roughness, in Heat and Mass Transfer Sourcebook, Scripta Publishing,
Washington, DC, pp 21–24
Gunter, A Y., and Shaw, W A (1942) Heat Transfer, Pressure Drop and Fouling Rates of
Liquids forContinuous and Noncontinuous Longitudinal Fins, Trans ASME, 64, 795–802.
Gupta, M K., Herzener, A L., and Hartnett, J P (1967) Turbulent Heat Transfer Characteristic
of Viscoelastic Fluids, Int J Heat Mass Transfer, 10, 1211–1224.
Guy, A R (1983) Double-Pipe Heat Exchangers, in Heat Exchanger Design Handbook, E U.
Schl¨under, ed., Vol 3, Hemisphere Publishing, Washington, DC, Sec 3.2
Hagge, J K., and Junkhan, G H (1974) Experimental Study of a Method of Mechanical
Augmentation of Convective Heat Transfer Coefficients in Air, Report HTL-3,
ISU-ERI-Ames-74158, Iowa State University, Ames, IA.
Hall, W B (1962) Heat Transfer in Channels Having Rough and Smooth Surfaces, J Mech.
Eng Sci., 4, 287–291.
Hall, D E., Incropera, F P., and Viskanta, R (2001a) Jet Impingement Boiling from a Circular
Free-Surface Jet during Quenching, 1: Single Phase Jet, J Heat Transfer, 123(5), 901–910.
Hall, D E., Incropera, F P., and Viskanta, R (2001b) Jet Impingement Boiling from a Circular
Free-Surface Jet during Quenching, 2: Two Phase Jet, J Heat Transfer, 123(5), 911–917.
Hampson, H., and Ozisik, N (1952) An Investigation into the Condensation of Steam, Proc.
Inst Mech Eng., 1B, 282.
Han, J.-C (1988) Heat Transfer and Friction Characteristics in Rectangular Channels with
Rib Turbulators, J Heat Transfer, 110, 321–328.
Han, J.-C., Zhang, Y M., and Lee, C P (1991) Augmented Heat Transfer in Square Channels
with Parallel, Crossed and V-Shaped Angled Ribs, J Heat Transfer, 113, 590–596.
Han, J.-C., Huang, J J., and Lee, C P (1993) Augmented Heat Transfer in Square Channels
with Wedge-Shaped and Delta-Shaped Turbulence Promoters, J Enhanced Heat Transfer,
1(1), 37–52
Trang 71 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
[1113],(85)
Lines: 1887 to 1925
———
9.0pt PgVar
———
Long Page PgEnds: TEX [1113],(85)
Hannemann, R J (1977) Recent Advances in Dropwise Condensation Theory,
ASME-77-WA/HT-21, ASME, New York.
Harms, T M., Jog, M A., and Manglik, R M (1998) Effects of Temperature-Dependent Vis-cosity Variations and Boundary Conditions on Fully Developed Laminar Forced Convection
in a Semicircular Duct, J Heat Transfer, 120, 600–605.
Hartnett, J P (1992) Viscoelastic Fluids: A New Challenge in Heat Transfer, J Heat Transfer,
114, 296–303
Hartnett, J P., and Cho, Y I (1998) Non-Newtonian Fluids, in Handbook of Heat Transfer, 3rd
ed., W M Rohsenow, J P., Hartnett, and Y I Cho, eds., McGraw-Hill, New York, Chap
10
Hartnett, J P., and Kostic, M (1985) Heat Transfer to a Viscoelastic Fluid in Laminar Flow
through a Rectangular Channel, Int J Heat Mass Transfer, 28, 1147.
Hasegawa, S., Echigo, R., and Irie, S (1975) Boiling Characteristics and Burnout Phenomena
on a Heating Surface Covered with Woven Screens, J Nuc Sci Technol., 12(II), 722–724.
Helmer, W A., and Iqbal, I (1980) LaminarHeat Transferin a CircularTube with Twisted
Tapes during Condensation, ASHRAE Trans., 86, Pt 2, 662–674.
Hesse, G (1973) Heat Transfer in Nucleate Boiling, Maximum Heat Flux and Transition
Boiling, Int J Heat Mass Transfer, 16, 1611–1627.
Hesselgreaves, J E (2001) Compact Heat Exchangers: Selection, Design and Operation,
Pergamon Press, Amsterdam, The Netherlands
Hetsroni, G., Zakin, J L., Lin, Z., Mosyak, A., Pancallo, E A., and Rozenblit, R (2000) The Effect of Surfactants on Bubble Growth, Wall Thermal Patterns and Heat Transfer in Pool
Boiling, Int J Heat Mass Transfer, 44, 485–497.
Hewitt, G F (1992) Handbook of Heat Exchanger Design, Begell House, New York.
Hewitt, G F., Shires, G L., and Bott, T R (1993) Process Heat Transfer, CRC Press, Boca
Raton, FL
Hilding, W E., and Coogan, C H., Jr (1964) Heat Transfer and Pressure Loss Measurements
in Internally Finned Tubes, Proc Symposium on Air-Cooled Heat Exchangers, ASME, New
York, pp 57–85
Holden, K M., Wanniarachchi, A., Marto, P J., Boone, D H., and Rose, J W (1987) The
Use of Organic Coatings to Promote Dropwise Condensation of Steam, J Heat Transfer,
109(3), 768–774
Honda, H., and Kim, K (1995) Effect of Fin Geometry on the Condensation Heat Transfer
Performance of a Bundle of Horizontal Low-Finned Tubes, J Enhanced Heat Transfer,
2(1/2), 139–147
Honda, H., and Nozu, S (1987) A Prediction Method for Heat Transfer during Film
Conden-sation on Horizontal Low Integral-Fin Tubes, J Heat Transfer, 109(1), 218–225.
Honda, H., and Rose, J (1999) Augmentation Techniques in External Condensation, in
Hand-book of Phase Change: Boiling and Condensation, (Kandlikar, S G., Shoji, M., and Dhir,
V K., eds.), Taylor& Francis, Philadelphia, Chap 22
Honda, H., Nozu, S., and Uchima, B (1988) A Generalized Prediction Method for Heat
Transfer during Film Condensation on a Horizontal Low Finned Tube, JSME Int J., Ser 2,
31(4), 709–717
Honda, H., Takamatsu, H., and Kim, K (1994) Condensation of CFC-11 and HCFC-123 in
In-Line Bundles of Horizontal Finned Tubes: Effect of Fin Geometry, J Enhanced Heat
Transfer, 1(2), 197–209.
Trang 81 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
[1114],(86)
Lines: 1925 to 1965
———
6.0pt PgVar
———
Normal Page PgEnds: TEX [1114],(86)
Hong, S W., and Bergles, A E (1976) Augmentation of LaminarFlow Heat Transferin Tubes
by Means of Twisted-Tape Inserts, J Heat Transfer, 98, 251–256.
Honma, M., Nishihara, A., and Atarashi, T (2001) Numerical Analysis of Impinging Air Flow
and Heat Transfer in Plate-Fin Type Heat Sinks, J Electron Packag., 123(3), 315–318.
Hsieh, R., and Marsters, G F (1973) Heat Transfer from a Vibrating Vertical Array of
Hori-zontal Cylinders, Can J Chem Eng., 51, 302–306.
Hudina, M (1979) Evaluation of Heat Transfer Performances of Rough Surfaces from
Exper-imental Investigation in AnnularChannels, Int J Heat Mass Transfer, 22, 1381–1392.
Hughes, T G., and Olson, D R (1975) Critical Heat Fluxes for Curved Surfaces during
Subcooled Flow Boiling, Trans Can Soc Mech Eng., 3(3), 122–130.
Hwang, J.-J., and Chang, B.-Y (2000) Effect of Outflow Orientation on Heat Transfer and
Pressure Drop in a Triangular Duct with an Array of Tangential Jets, J Heat Transfer,
122(4), 669–678
Hwang, U P., and Moran, K P (1981) Boiling Heat Transfer of Silicon Integrated Circuits
Chip Mounted on a Substrate, in Heat Transfer in Electronic Equipment, M D Kelleher and M M Yovanovich, eds., ASME-HTD-20, ASME, New York, pp 53–59.
Hwang, G J., and Tzeng, S C., Mao, C P., and Soong, C Y (2001) Heat Transfer in a Radially
Rotating Four-Pass Serpentine Channel with Staggered Half-V Rib Turbulators, J Heat
Transfer, 123(1), 39–50.
Iacovides, H., Jackson, D C., Kelemenis, G., Launder, B E., and Yuan, Y M (2001) Flow and
Heat Transfer in a Rotating U-Bend with 45° Ribs, Int J Heat Fluid Flow, 22(3), 308–314.
Iltscheff, S (1971) ¨Uber einige Versuche zur Erzielung von Tropfkondensation mit Fluorierten
K¨altemitteln, Kultetech Klim., 23, 237–241.
Inasaka, F., Nariai, H., Fujisaki, W., and Ishiguro, H (1991) Critical Heat Flux of Subcooled
Flow Boiling in Tubes with Internal Twisted Tape, Proc ASME/JSME Thermal Engineering
Joint Conference, Vol 2, ASME, New York, pp 65–70.
Ito, H (1959) Friction Factors for Turbulent Flow in Curved Pipes, Trans ASME, J Basic
Eng., 81, 123–134.
Itoh, M., and Kimura, H (1979) Boiling Heat Transfer and Pressure Drop in Internal
Spiral-Grooved Tubes, Bull Jpn Soc Mech Eng., 22(171), 1251–1257.
Itoh, M., Shikazono, N., and Uchida, M (1997) Enhancement of Condensation Heat Transfer
in a Horizontal Micro-fin Tube for Zeotropic Refrigerant Mixtures, Proc Oji International
Seminar, Japan, pp 233–238.
Janssen, L A M., and Hoogenedoorn, C J (1978) Laminar Convective Heat Transfer in
Helical Coiled Tubes, Int J Heat Mass Transfer, 21, 1179–1206.
Jensen, M K (1980) Boiling Heat Transfer and Critical Heat Flux in Helical Coils, Ph.D
dissertation, Iowa State University, Ames, IA
Jensen, M K (1984) A Correlation for Predicting Critical Heat Flux Condition with Twisted
Tape Swirl Generators, Int J Heat Mass Transfer, 27(11), 2171–2173.
Jensen, M K., and Bensler, H P (1986) Saturated Forced Convective Boiling Heat Transfer
with Twisted Tape Inserts, J Heat Transfer, 108, 93–99.
Jensen, M K., and Bergles, A E (1981) Critical Heat Flux in Helically Coiled Tubes, J Heat
Transfer, 103, 660–666.
Jensen, M K., and Bergles, A E (1982) Critical Heat Flux in Helical Coils with a
Circumfer-ential Heat Flux Tilt toward the Outside Surface, Int J Heat Mass Transfer, 25, 1383–1395.
Trang 91 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
[1115],(87)
Lines: 1965 to 2001
———
10.0pt PgVar
———
Normal Page PgEnds: TEX [1115],(87)
Jensen, M K., and Shome, B (1994) Literature Survey on Heat Transfer Enhancement
Tech-niques in Refrigeration Applications, Report ORNL/Sub/91-SL794, Oak Ridge National
Laboratory, Oak Ridge, TN
Jensen, M K., Trewin, R R., and Bergles, A E (1992) Crossflow Boiling in Enhanced
Tube Bundles, in Two-Phase Flow in Energy Systems, ASME-HTD-220, ASME, New York,
pp 11–17
Jones, T B (1978) Electrohydrodynamically Enhanced Heat Transfer in Liquids: A Review,
Adv Heat Transfer, 14, 107–148.
Joshi, S D., and Bergles, A E (1981) Analytical Study of LaminarFlow Heat Transferto
Pseudoplastic Fluids with Uniform Wall Temperature, AIChE Symp Ser., 77(208), 114–
122
Joule, J P (1861) On the Surface Condensation of Steam, Philos Trans R Soc London, 151,
133–160
Junkhan, G H., Bergles, A E., Nirmalan, V., and Hanno, W (1988) Performance Evaluation of
the Effects of a Group of Turbulator Inserts on Heat Transfer from Gases in Tubes, ASHRAE
Trans., 94(2), 1195–1201.
Kabata, Y., Nakajima, R., and Shioda, K (1996) Enhancement of Critical Heat Flux for Flow
Boiling of Waterin Tubes with a Twisted Tape and Helically Coiled Wire, Proc
ASME-JSME 4th International Conference on Nuclear Engineering, Vol 1, Pt B, 639–646.
Kakac¸, S., and Liu, H (2002) Heat Exchangers: Selection, Rating, and Thermal Design, 2nd
ed., CRC Press, Boca Raton, FL
Kakac¸, S., Bergles, A E., and Oliveira Fernandes, E (1988) Two-Phase Flow Heat
Exchang-ers: Thermal-Hydraulic Fundamentals and Design, Kluwer Academic, Dordrecht, The
Netherlands
Kakac¸, S., Bergles, A E., Mayinger, F., and Y¨unc¨u, H (1999) Heat Transfer Enhancement of
Heat Exchangers, Kluwer Academic, Dordrecht, The Netherlands.
Kandlikar, S G., Shoji, M., and Dhir, V K (1999) Handbook of Phase Change: Boiling and
Condensation, Taylor& Francis, Philadelphia.
Kang, Y T., and Christensen, R N (2000) The Effect of Fluid Property Variations on Heat
Transfer in Annulus Side of a Spirally Fluted Tube, J Enhanced Heat Transfer, 7(1), 1–9.
Karayiannis, T G., and Xu, Y (1998a) Electric Field Effect in Boiling Heat Transfer, A:
Simulation of the Electric Field and Electric Forces, J Enhanced Heat Transfer, 5(4), 217–
229
Karayiannis, T G., and Xu, Y (1998b) Electric Field Effect in Boiling Heat Transfer, B:
Electrode Geometry, J Enhanced Heat Transfer, 5(4), 213–247.
Katz, D L., Meyers, J E., Young, E H., and Balekjian, G (1955) Boiling outside Finned
Tubes, Pet Refiner, 34, 113–116.
Kays, W M., and London, A L (1984) Compact Heat Exchangers, 3rd ed., McGraw-Hill,
New York
Kedzierski, M A (1993) Simultaneous Visual and Calorimetric Measurements of 11,
R-123, and R-123 Alkybenzene Nucleate Flow Boiling, in Heat Transfer with Alternative
Refrigerants, ASME-HTD-423, ASME, New York, pp 27–33.
Kedzierski, M A., and Goncalves, J M (1997) Horizontal Convective Condensation of
Alter-native Refrigerants within a Micro-fin Tube, NISTIR 6095, National Institute of Standards
and Technology, Gaithersburg, MD
Trang 101 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
[1116],(88)
Lines: 2001 to 2047
———
7.0pt PgVar
———
Long Page PgEnds: TEX [1116],(88)
Kedzierski, M A., and Kim, M S (1997) Convective Boiling and Condensation Heat Transfer with a Twisted-Tape Insert for R12, R22, R152a, R134a, R290, R32/R134a, R32/R152a,
R290/R134a, R134a/R600a, Report NISTIR 5905, National Institute of Standards and
Tech-nology, Gaithersburg, MD
Kelkar, K M., and Patankar, S V (1990) Numerical Prediction of Fluid Flow and Heat Transfer in a Circular Tube with Longitudinal Fins Interrupted in the Streamwise Direction,
J Heat Transfer, 112, 342–348.
Kemeny, G A., and Cyphers, J A (1961) Heat Transfer and Pressure Drop in an Annulus
Gap with Surface Spoilers, J Heat Transfer, 83, 189–198.
Kenning, D B R., and Kao, Y S (1972) Convective Heat Transferto WaterContaining
Bubbles: Enhancement Not Dependent on Thermocapillarity, Int J Heat Mass Transfer,
15, 1709–1718
Kern, D Q., and Kraus, A D (1972) Extended Surface Heat Transfer, McGraw-Hill, New
York
Kettner, I J., Degani, D., and Guffinger, G (1991) Numerical Study of Heat Transfer in
Internally Finned Tubes, Numer Heat Transfer, A20, 159–180.
Khanpara, J C., Bergles, A E., and Pate, M D (1986) Augmentation of R-113 In-Tube
Condensation with Micro-fin Tubes, in Heat Transfer in Air Conditioning and Refrigeration
Equipment, ASME-HTD-65, ASME, New York, pp 21–32.
Kim, C.-J., and Bergles, A E (1985) Structured Surfaces for Enhanced Nucleate Boiling,
Report HTL-36, ISU-ERI-Ames-86220, Iowa State University, Ames, IA.
Kim, N.-H., and Choi, K.-K (2001) Nucleate Pool Boiling on Structured Enhanced Tubes
Having Pores with Connecting Gaps, Int J Heat Mass Transfer, 44(1), 17–28.
Kitto, J B., and Wiener, M (1982) Effects of Nonuniform Circumferential Heating and
Inclination on Critical Heat Flux in Smooth and Ribbed Bore Tubes, in Heat Transfer, 1982,
Vol 4, Hemisphere Publishing, New York, pp 297–302
Koch, R (1958) Druckverlust und W¨arme¨ubergang bei verwirbelter Str¨omung, VDI
For-schungsh., B24(469), 1–44.
Kovalev, S A., Solov’yev, S L., and Ovodkov, O A (1990) Theory of Boiling Heat Transfer
on a Capillary Porous Surface, Proc 9th International Heat Transfer Conference, Vol 2,
pp 105–110
Kraus, A D (1982) Analysis and Evaluation of Extended Surface Thermal Systems,
Hemi-sphere Publishing, New York
Kraus, A D., and Bar-Cohen, A (1995) Design and Analysis of Heat Sinks, Wiley, New York.
Kraus, A D., Aziz, A., and Welty, J (2001) Extended Surface Heat Transfer, Wiley, New
York
Kryukov, Y V., and Boykov, G P (1973) Augmentation of Heat Transfer in an Acoustic Field,
Heat Transfer Sov Res., 5(1), 26–28.
Kubair, V., and Kuloor, N R (1963) Pressure Drop and Heat Transfer in Spiral Tube Coils,
Indian J Technol., 1, 336–338.
Kubair, V., and Kuloor, N R (1966a) Comparison of Performance of Helical and Spiral Coil
Heat Exchangers, Indian J Technol., 4, 1–8.
Kubair, V., and Kuloor, N R (1966b) Heat Transfer to Newtonian Fluids in Coiled Pipes in
LaminarFlow, Int J Heat Mass Transfer, 9, 63–75.
Kubanek, G R., and Miletti, D L (1979) Evaporative Heat Transfer and Pressure Drop
Per-formance of Internally-Finned Tubes with Refrigerant 22, J Heat Transfer, 101, 447–452.