CCNA Wireless Official Exam Certification Guide part 33 doc

292 CCNA Wireless Official Exam Certification GuideDefinition of Key Terms Define the following key terms from this chapter, and check your answers in the Glossary: SMB, Cisco Smart Busi

292 CCNA Wireless Official Exam Certification Guide

Definition of Key Terms

Define the following key terms from this chapter, and check your answers in the Glossary:

SMB, Cisco Smart Business Communication System (SBCS), Cisco Configuration Assis-tant (CCA), Radio Resource Management (RRM), Lightweight Access Point Protocol (LWAPP), Cisco Wizard Configuration tool, community, Cisco Discovery Protocol (CDP)

References

1Cisco 526 Wireless Express Mobility Controller: http://tinyurl.com/2rbfxg Cisco 521 Wireless Express Access Point: http://tinyurl.com/6bxhze

Exam Preparation Tasks

Review All the Key Topics

Review the most important topics from this chapter, noted with the Key Topics icon in the outer margin of the page Table 15-2 lists a reference of these key topics and the page number where you can find each one

Table 15-2 Key Topics for Chapter 15

Paragraph from the section,

“Overview of the Small Business Communication System”

Bullet points detailing the components of the solution

280

controller

283

This chapter covers the following subjects:

Using Windows to Connect to a Wireless LAN: Looks at using the Windows Wireless Zero Configuration Utility to connect to a wireless LAN

Using a Mac to Connect to a Wireless LAN: Shows how to use Mac OSX to connect to

a wireless LAN

Using Linux to Connect to a Wireless LAN: Covers how to use Linux NetworkManager

to connect to a wireless LAN

Using the ADU to Connect to a Wireless LAN: Describes how to install a Cisco wireless card and use the ADU to manage enterprise class profiles

The ACAU: Covers using the Aironet Client Admin-istration Utility to deploy profiles to the enterprise

The Cisco Secure Services Client: Shows how

to use the Cisco Secure Services Client to manage customer and guest access to Cisco networks

The Cisco Client Extension Program: Looks at free licensing to Cisco extensions for third-party vendors

CHAPTER 16

Wireless Clients

Table 16-1 “Do I Know This Already?” Section-to-Question Mapping

Networks today have many different types of clients Users with PCs and laptops running Linux or the Mac OS are becoming more common In a mobile environment, these devices must support connectivity to wireless networks This chapter introduces the network con-figuration tools found in Windows, Linux, and Mac devices In addition to these packaged clients, Cisco provides the Aironet Desktop Utility (ADU), discussed in this chapter, along with some of its available utilities

You should do the “Do I Know This Already?” quiz first If you score 80 percent or higher, you might want to skip to the section “Exam Preparation Tasks.” If you score below 80 percent, you should review the entire chapter Refer to Appendix A, “Answers to the ‘Do I Know This Already?’ Quizzes,” to confirm your answers

“Do I Know This Already?” Quiz

The “Do I Know This Already?” quiz helps you determine your level of knowledge of this chapter’s topics before you begin Table 16-1 details the major topics discussed in this chapter and their corresponding quiz questions

18_1587202115_ch16.qxp 9/29/08 2:42 PM Page 295

296 CCNA Wireless Official Exam Certification Guide

1. What is the name of the Windows utility for configuring wireless profiles?

a. Zero Day Configuration

b. Wireless Zero NetworkManager

c. AirPort Zero Configuration

d. Wireless Zero Configuration Utility

2. The Windows Wireless Zero Configuration Utility can set up which of the following enterprise class profiles? (Choose all that apply.)

a. 802.1x

b. WPA/WPA2/CCKM

c. WEP static keys

d. None of these

3. True or false: When the WZC is in use, the ADU can also be used

a. True

b. False

4. True or false: The WZC will choose the most secure network available when starting up

a. True

b. False

5. What configuration tool is used to set up wireless profiles on Mac OSX?

a. WZC

b. AirPort

c. AirWave

d. Aironet

6. What graphical configuration tool is used in Linux to set up wireless networks?

a. iwconfig

b. NetworkManager

c. WZC

d. Ubuntu ADU

7. Cisco offers which types of wireless cards? (Choose all that apply.)

a. Cardbus

b. PCI

c. USB

d. Flash

e. PCMCIA

Chapter 16: Wireless Clients 297

8. What does the term CAM refer to in the ADU advanced parameters?

a. Constant Awake Mode

b. Content Addressable Memory

c. Confidential Aironet Module

d. Constant Airwave Mode

9. When you perform a site survey with the CSSU, what indicates a good SNR?

a. A higher number in dBm

b. A lower number in dBm

c. The CSSU can’t determine the SNR

d. An equal receive strength

10. What software lets you create profiles for deployment with the ADU?

a. ACCU

b. ASSCU

c. ACAU

d. SSC

11. What software is designed for both wired and wireless profile management and access to Cisco enterprise networks?

a. SSC

b. SSM

c. ASA

d. ADU

12. What program is designed for vendors to create compatible hardware?

a. CCX

b. Compatibility Program

c. CCA

d. Cisco Client Portability Program 18_1587202115_ch16.qxp 9/29/08 2:42 PM Page 297

298 CCNA Wireless Official Exam Certification Guide

Foundation Topics

Using Windows to Connect to a Wireless LAN

The wireless configuration tool for Microsoft Windows is called the Windows Wireless Zero Configuration Utility (WZC) The WZC is designed to provide the basic capabilities necessary to access most WLANs; however, it is not very powerful when it comes to trou-bleshooting utilities Many vendors such as IBM/Lenovo install a custom client that can

be used to create and manage profiles as an alternative to the WZC So when you use these vendor-installed clients, you cannot use the Windows WZC

WZC is a pretty basic client It’s designed to set up the connection for you and take some

of the workload off the end user—hence the “Zero Configuration” part of the name When a computer boots without a WLAN profile preconfigured, the WZC detects any wireless networks that are broadcasting and informs the user that a wireless network is available

If a profile has already been created, the WZC tries to join it automatically This WZC be-havior can cause confusion when you have a WZC profile configured with the same SSID

as another network that is within range This is why changing default SSIDs such as

“linksys” is recommended

Configuring a Profile

You can set up a profile using Windows Vista in many ways One method is to follow these steps:

Step 1 Click Start (that’s the little round Windows logo if you’re running Vista) Step 2 Right-click Network.

Step 3 Click Properties You see the Network and Sharing Center window, as shown

in Figure 16-1

Step 4 Click Manage wireless networks in the left panel The Manage wireless

net-works window appears Here you can see all available wireless network con-nection profiles If you have yet to create any, this window looks like Figure 16-2

Step 5 Double-click an existing profile to view or change its setting Click the Add

button to create a new profile

If you decide to add a new network, you see a new window that allows you to

do so in a wizard-style setup

Another way to add a wireless profile is to connect to one that is within range of your computer and that Windows has discovered In Figure 16-3, Windows has detected a wire-less network within range

Chapter 16: Wireless Clients 299

Figure 16-1 Network and Sharing Center

Figure 16-2 Managing Wireless Networks

18_1587202115_ch16.qxp 9/29/08 2:42 PM Page 299

300 CCNA Wireless Official Exam Certification Guide

Figure 16-3 Wireless Networks Detected

When you click the link, a new window appears, allowing you to connect one of the avail-able networks, as shown in Figure 16-4

You can select one of the available networks and click the Connect button If there are

any security settings, you are prompted for that information You will probably find the profile setup in Windows to be very easy, especially because it detects networks for you You might also wonder how this process works The next section covers the process in more detail

How the WZC Tool Works

When a Windows-based computer boots up, the Wireless Zero Configuration reports any network that is being broadcast, usually via a balloon window at the bottom right of the screen This is because when a WZC client attempts to access a network, it uses an active scanning process This differs from other methods, such as passive scanning, which is used

by other clients

Note: The concept of passive scanning simply involves the client’s waiting until it hears a beacon from an access point

With active scanning, the WZC sends probe requests with a blank SSID field This is called active null scanning This type of scan causes access points (AP) that are in range

to respond with a list of available service set identifiers (SSID) If one of the received SSIDs exists on the preferred networks list in the WZC, the WZC connects to it, or at least tries to If that connection fails, the WZC tries the next SSID from the preferred net-works list that was seen to be available from the scan

If none of the SSIDs that were learned from the active null scan or in the preferred net-works list result in a successful connection, the WZC looks for any ad hoc network in the available networks list If the WZC finds an ad hoc network, it connects to it, which could

be a security issue This happens in the background without any user intervention When you set up the profile, you can select an option to connect to only infrastructure net-works

If the connection attempts are still unsuccessful at this point (and assuming that you are

allowing ad hoc connections), the WZC makes itself the first node and thus allows others

Figure 16-4 Connecting to a Network

Chapter 16: Wireless Clients 301

to connect to it Then the WZC sends out beacons that others on the network can see, al-lowing other devices to connect to the WZC sending the beacons

If the WZC finds no preferred network and no ad hoc network to connect to, it checks the

setting Automatically Connect to non-preferred networks This is not enabled by

de-fault If it were enabled, the WZC would try each non-preferred network in the available networks list

If this setting is left at its default value, the WZC assigns itself a random network name and places the card in infrastructure mode From this point on, it scans all the channels every 60 seconds, looking for new networks

Using a Mac to Connect to a Wireless LAN

You can configure WLAN profiles on a Mac using AirPort or AirPort Extreme This sec-tion describes AirPort Extreme, its software interface, and how to configure a profile on a Mac to connect to a WLAN

AirPort, which really refers to the old version that supported only 802.11b networks, pro-vides a software interface used to configure the WLAN profile, connect to detected net-works, and perform advanced configurations and troubleshooting

Configuring a Profile

To configure a profile in Mac OSX, follow these steps:

Step 1 Click the Open Apple icon in the top-right corner of the screen.

Step 2 Select System Preferences.

18_1587202115_ch16.qxp 9/29/08 2:42 PM Page 301