Laptops All-in-One Desk Reference For Dummies- P16 doc

Windows Easy Transfer works if you’re seeking to move files and settings from a computer running Windows XP or Windows Vista to another machine running Windows Vista.. If your source mac

✦ Internet favorites

✦ E-mail settings

✦ E-mail contacts and address books

✦ E-mail messages

What can’t you transfer? In a word, software Okay, a few more words: And

the operating system

Software and the operating system can’t be automatically transferred by Windows for two pretty good reasons:

✦ It’s dangerous You could end up moving a corrupted or outdated ver-sion of programming to an otherwise unsullied machine And your new machine may be organized differently than the old machine (different labels for hard disk drives, different folder names, a different file attrib-ute system)

Some third-party software programs (not from Microsoft) promise to move software from one machine to another I’ve even seen them work But I can’t guarantee 100 percent success with them, especially as software makers move to sophisticated validation schemes for their offerings

✦ It’s unseemly The license for your software or operating system may not allow transfer to a different machine without the manufacturer’s permis-sion Like it or not, software makers are becoming more insistent on treating their work as if it were a physical object; you can move it from one place to another (with permission) but you can’t clone it so it exists

in two places at the same time

Some software makers offer multiple-machine licenses that permit installa-tion of their products on two or more machines That’s a pretty good deal for a laptop if you want to have the same program on your laptop as you have on your desk

Using Windows Easy Transfer

Microsoft lays it on the line with the name of their utility in Windows Vista Easy Transfer is supposed to be an automated tool that does all the heavy lifting of bits and bytes and transfers them to a new machine And to a great degree, what they say is what you get

Access to the transfer program is one of the choices on the Welcome Center screen that insists on popping up every time you start Windows Vista until you uncheck the little box at the bottom of the screen to tell it not to do it again The other way to find the transfer utility is this:

Book II Chapter 3

1.Choose Start ➪ Control Panel

2.Open the System and Maintenance folder

Choose the System folder if you’re using Classics Menu

3.Choose Getting Started with Windows

The Windows Welcome Center is resurrected

Revving up your transfer Before you can proceed with a transfer, you must shut down all running pro-grams (except for Windows and — in most cases — your antivirus program)

If you forget to do this, the program reminds you in midstream and waits for you to clear the decks

You should always run an up-to-date antivirus program on all of your machines I recommend conducting a full system scan of your old machine before you begin transferring files and settings to a new one; otherwise, viruses and spyware will happily hitch a ride over to your new machine

Windows Easy Transfer works if you’re seeking to move files and settings from a computer running Windows XP or Windows Vista to another machine running Windows Vista If your old computer is running Windows 2000, you can transfer files but not settings See Figure 3-1

Figure 3-1:

The process for using Windows Easy Transfer is spelled out step-by-step on

successive screens

One exception: Windows XP Starter, a version of that operating system intended for use in third-world nations and certain other developing markets, doesn’t work with Windows Easy Transfer If you somehow have a copy of that limited operating system, you have to manually copy files you want to transfer and move them using a CD, DVD, flash disk drive, or other media

If your source machine is running a version of Windows older than Windows

2000 (including Windows Me, Windows 98, or Windows 95), you should be able to purchase a third-party transfer program at a computer retailer Your first choice when using Windows Easy Transfer is between the following:

✦ Start a new transfer You can select files and settings to move to a new system

✦ Continue a transfer in progress This allows you to resume a transfer where you’ve already made your selections

The program asks if the machine where you’re working is your new

puter (the destination for the transferred files and settings) or your old com-puter (the source) The recommended procedure calls for starting the

process on the new machine

Getting from here to there: Means of moving You have three ways to move settings and data from one machine to another

✦ Easy Transfer cable Easy Transfer cable is the Microsoft moniker for a

specialized USB cable that connects two machines; it differs from a regu-lar USB cable because it has a regu-large A connector at each end, instead of the typical large A computer end and small B device end

Start Windows Easy Transfer on the new (destination) laptop and plug in the cable only when you’re instructed to do so You may need to use the Windows Vista installation disc on your old (source) computer to install the Easy Transfer utility there; the onscreen instructions walk you through the process

✦ Direct transfer over a network You must properly configure both

source and destination computers and connect them to the same wired

or wireless network Start Windows Easy Transfer on your new (destina-tion) computer To transfer the files from the source computer, you’re directed to obtain a key from the program on the new machine and then enter that key on the old (source) machine The key serves as a pass-word to protect files and settings moving over a shared network

Book II Chapter 3

✦ Removable media Copy files to a USB flash drive, a CD or DVD, or an

exter-nal hard disk drive and then bring the media from the source to the destina-tion for transfer See Figure 3-2 As part of the process, Windows Easy Transfer estimates how much space is needed on a removable medium

• A standard DVD can hold about 4.7GB of data

• A dual-layer DVD can hold about 8.4GB

• A CD has smaller capacity, usually between 600 and 800MB

• Flash memory devices are now available in sizes up to 16GB (and you’ll probably see them go much higher)

Another option is to copy the files you want to transfer to an external hard disk drive and then bring that drive from the source to the destination computer The utility can split the files into as many groups as necessary, spreading data across more than one CD or DVD, or allowing you to use a flash drive as many times as needed to move all the files and settings

Figure 3-2:

A flash memory drive is an easy way to transfer settings from one machine to another

This avoids setting up a wired or WiFi network connection between machines before settings have been moved

Feeling choosy about files to transfer Sometimes you want to bring over everything from your old computer, and sometimes you want to have a nearly fresh start Windows Easy Transfer offers three options

✦ All user accounts, files, and settings This choice is recommended if you

want to essentially clone one machine to another (except for the operating system and software applications) All users need to create a new password the first time they log on to their account on the new computer

If you’ve already created user accounts on the new computer, you can match the new accounts to the source accounts (The new account names can be the same, or you can make changes in the process of matching settings from one machine to another.)

You must have administrative privileges on both machines to use the All User Accounts option Administrative privileges are used mostly in large office settings where the computer department seeks to maintain consis-tency (and control) over all machines

If you haven’t yet created user accounts on the new computer, you can establish them as part of the transfer process And again, they can be the same user accounts as existed on the source machine, or you can create new ones and match the data as you wish

✦ My user account, files, and settings only If you will be the only user of

your new laptop, or if you do not intend to set it up with separate accounts for other occasional users, you can choose to transfer only the information that is associated with your personal user account on the source computer You need to create a new password the first time you log on to the new computer

✦ Advanced options If you want to get choosy, transferring some user

accounts but not others, or certain folders or program settings but not all, then come here (See Figure 3-3.) This is called advanced because, well, it’s not for newbies If you’re not certain which files or folders you need, or the nature of settings files, consult the Help section for each program (and Windows) for assistance

Revealing the secret beauty of a settings transfer

If you really want to be a cautious and very smart computer user, you can use Windows Easy Transfer (or the similar File and Settings Transfer Wizard

of Windows XP) to make backup copies of your settings and configurations — and even your files

Book II Chapter 3

Pretend you’re setting up a new computer and gather all the files from the source machine onto a removable medium such as an external hard drive, DVD, or flash memory key Then put the medium on the shelf and leave it there

In case of disaster, you can reconstruct all your essential settings and the files —

as of the date you made the copy — for reinstallation on any machine

Windows XP Files and Settings Transfer Wizard

If your new machine is running Windows XP, you have a utility called the Files and Settings Transfer Wizard (that performs similarly to the Windows Vista Easy File Transfer utility) The wizard isn’t magical (a bit less polished than the latest and greatest) but still allows most users to migrate their set-tings and files from one machine to another

If your new (destination) machine is running Windows Vista, use the Easy File Transfer program that comes with that operating system The installation disc for Vista includes a utility that you’re asked to load onto your older machine to automate the process

Figure 3-3:

The advanced options of Windows Easy Transfer let you choose specific types of programs and settings

The file wizard works with any operating system from Windows XP back in time through Windows Me, Windows 98, and Windows 95 You can transfer data from machine to machine over a

✦ Network cable

✦ PC-to-PC USB cable

✦ Special form of serial cable called a null modem that can be purchased at

computer stores; some software utilities designed for file transfer include this cable

Note that most modern machines no longer offer serial ports You can, though, purchase converters that make a USB port act like a standard serial connection, or that add a USB connector to a standard serial cable In some designs and applications, these serial conversions operate much slower than either standard serial or newer USB ports

To run the wizard, follow these easy steps:

1.Connect the two machines by cable

2.Click Start ➪All Programs ➪Accessories ➪ System Tools ➪Files and Settings Transfer Wizard.

Unlike the design of the Windows Vista utility, under Windows XP you can start the transfer process at either end — the source or the destination You need either your original Windows XP installation disc or to create a transfer floppy diskette (blast from the past) or use a flash memory key or other portable medium

Exporting Outlook Express or Windows Mail Contacts

If you run your life by e-mail (guilty as charged, dear reader) maintaining schedules, receipts, and confirmations in the folders of your mail client, you may want to spend the time every week or so backing up your address books and mail

For most Windows XP users (as well as those people using outdated but recent versions of the operating system including Windows Me, Windows 98, and Windows 95) the most common e-mail client is Outlook Express, which is provided free as part of Windows You may also choose to use a third-party e-mail client such as Eudora Another option is Microsoft Outlook, which is a full-featured e-mail, calendar, and contact-management software package sold

as part of various Microsoft Office packages For simplicity’s sake, I recommend Outlook Express

Book II Chapter 3

With the introduction of Windows Vista, Microsoft differentiated between Outlook and its basic Outlook Express Within Vista, the free e-mail client is called Windows Mail; that program is a slightly more polished version of Outlook Express

As you explore in Book VIII, two common mail protocols in use on personal computers have an important difference

POP3

POP3, the current version of an older Post Office Protocol (POP) that dates

back to the early days of PCs, downloads copies of all mail from wherever the messages are located and places them in a folder on your computer

That’s good, in a way, because you’ll know you have a copy But that’s bad if your hard disk drive or the computer itself dies And it isn’t all that great for laptop users if you download e-mail onto your desktop machine and then hit the road without copies And if you pick up mail while on the road, you may need to export copies to your desktop from the laptop

IMAP

Internet Message Access Protocol (IMAP or sometimes referred to as IMAP4)

works differently than POP3 E-mail that comes into your Internet service provider’s server stays there, on that server Each time you sign on to look

at your mail, a copy of the header (the subject, sender, date, time, and other information) is sent to your computer To read a message’s details, you instruct your e-mail client to download the message; however, your desktop and laptop keep no copy unless you instruct your computer to store it in a local folder

Why is IMAP a better way?

✦ It adds a layer of protection against viruses and spyware; you can look

at the e-mail headers sent your way and delete them from the server before they download to your laptop (And most e-mail or Internet providers also scan messages at their end, identifying most viruses and other would-be intrusions; depending on your instructions to the provider, the nasty bits may be removed from the message, the entire message may be discarded, or the message may be marked as Spam or Virus to warn you of its content before you touch it.)

✦ Of particular value to laptop users is that any messages you receive while you’re traveling also show up on your desktop when you return home

(That is, unless you move the message to a local folder on your laptop.)

If you’re given a choice when setting up your e-mail client (most commonly Outlook Express on Windows XP, or Windows Mail on Windows Vista) I rec-ommend choosing IMAP If you’re not given a choice, contact the Internet provider and ask them to assist you in establishing an IMAP account

Exporting Address Books or Business Cards

For some users, even more important than the mail itself is the address book associated with an e-mail program Here’s where you store (or allow the computer to automatically store) the names, e-mail addresses, and other information about the people with whom you correspond

Moving a contacts list with you is valuable when you move from machine to machine You might also want to donate your list to a coworker or family member; make sure you think that gift all the way through before going ahead, though

The process is simple

1.Export the address book (the term used in Outlook Express) or

con-tact list (as is called in Microsoft Mail) to a file and store it on your computer

2.Move a copy to the new machine

Do so over a network or by copying it to a removable media such as a

CD, DVD, external hard drive, or flash memory key

3.Import the file into the destination e-mail program.

Windows Mail and Outlook Express support exporting the following types of

address books:

✦ Microsoft Exchange Personal Address Book

✦ Text File (Comma Separated Values)

Windows Mail and Outlook Express support importing the following types of

address books:

✦ Eudora Pro or Light Address Book (through v3.0)

✦ LDIF - LDAP Data Interchange Format

✦ Microsoft Exchange Personal Address Book

✦ Microsoft Internet Mail for Windows 3.1 Address Book

✦ Netscape Address Book (v2 or v3)

Book II Chapter 3

✦ Netscape Communicator Address Book (v4)

✦ Text File (comma-separated values)

✦ Business Card (vCard)

Exporting and importing with Outlook Express From within Outlook Express you can export address book data for use with another installation of the same program or to the full-featured Outlook pro-gram The file you create can also be converted for use by Microsoft Mail and by many third-party e-mail programs

1. Choose Tools ➪ Address Book

2. Choose File ➪ Export.

To export an address book, follow these steps:

1.Click the address book you want to export.

2.Click Export

3.Follow the instructions on the wizard

4.Store the file in the location of your choice.

To export a business card, follow these steps:

1.Click the desired vcf file

2.Click Save.

Importing works the same, only backwards:

1.Open Outlook Express.

2.Choose the Tools menu and click Address Book

3.From the File menu, point to Import.

4.Browse to the location of the file you want to use.

Exporting and importing with Windows Mail

To export or import with Windows Mail, you have two choices (and one minor name change) With this program, the address book is called contacts

To export, do one of the following:

1.Choose File ➪ Export ➪ Windows Contacts.

or