Sổ tay người dùng NET28 part 28 ppsx

Ok guys i just thought i should add the links to the pin mod guide and unlocking guide for those not sure on which pins to connect for what Pin Mod guide http://www.ocinside.de/go_e.html

Trang 1

Nó dễ sử dụng,Nó có sẵn trình tìm kiếm máy chủ Proxy

Rất buồn là nó không miễn phí

Đây là link: http://www.sa6ry.com/surfanonymous/

_

Anh nên thêm NetworkActiv vào danh sách Server

www.NetworkActiv.com

pretty dated linkfarm at this time but what the hell

http://radified.com/Articles/internet_security.htm

(c) www.ocforums.com

Tôi không biết phải gửi bài này vào đâu nhưng có vẻ như rất nhiều người ở đây hỏi

về những liên kết(link) đến những thứ xác định Vì thế tôi sẽ gửi những link ở đây cho những ai cần chúng Nếu ai đó có ý kiến rằng tôi không được gửi bài ở đây, thì hãy up lời chào mừng của bạn ở đây cho tất cả cùng thấy

Chúng đây;

Motherboard Monitor v5.3

http://www.pcworld.com/downloads/fi fid,7309,00.asp

CPU Stability Test

Trang 2

BIOS Wizard

http://www.pcworld.com/downloads/fi id,21480,00.asp

SiSoft Sandra Standard

Prime95

http://www.mersenne.org/freesoft.htm

WCPUID

http://hp.vector.co.jp/authors/VA00 c/download.html

CPUID/CPU-Z

http://www.cpuid.com/cpuz.php

NEW

Central Brain Identifier

http://www.majorgeeks.com/download.php?det=3538

3DMark and PCMark

http://www.futuremark.com/download/

CPU Monitor

http://jongrieve.net/cpumon/

BenchMarks Downloads

http://www.overclockersclub.com/dow n=category&id=6

Tweaking Downloads

http://www.overclockersclub.com/dow n=category&id=5 Generic Utilities Downloads

http://www.overclockersclub.com/dow =category&id=10

Trang 3

Ok guys i just thought i should add the links to the pin mod guide and unlocking guide for those not sure on which pins to connect for what

Pin Mod guide

http://www.ocinside.de/go_e.html?/h amd_pinmod.html

Unlocking by painting guide

http://www.ocinside.de/go_e.html?/h d_painting.html

And if i am posting these unlocking links i might as well explain it before somone burns out their cpu and says I am responsible so here goes

In reality a chip can be overclocked on itself without the BIOS and for all of you out there with 2 chips lieing around out opf ur pc i advise you to take a look at the bridges on the chip and note differences All athlon xp chips had the bridges in the same position but different ones were connected to make the chip stock at different multis and voltages Now for example all thouroughbreds have 5 L3 bridges and these control the cpu's multiplier A 1600xp will have its multi locked at 10.5 by having the L3 in the order "open, open, open, open, closed." This locks the chip at 10.5 A 1700xp will have its L3 bridges set up as "open, open, open, open, open." and that locks it at a 11 multi The multis on these chips are only locked for the lower multis meaning that it will be at 11 but u can normally access higher multis and not the lower ones which are what most people want so they can set their FSB higher Now it has been figured out somehow that no matter what the L3 bridges are set at, if you connect the number 5 L3 bridge it allows u access to the lower multis and this seems the way most people unlock the thoroughbreds The

polomino cores were unlocked by connecting all the L1 bridges Before any of this unlocking took place amd's athlon thunderbird chips were out and people figured out by using a graphite pencil it was easy enough to connect the L1 bridges to unlock the multi for higher overclocks But amd naturally caught on and started cutting laser holes between the bridges that werent factory connected to stop

overclocking from taking place These bridges are cut deep into the copper layer so

if you were to connect the bridges using conductive paint it would kill the chip so

Trang 4

overclockers started to fill these with non conductive substances I heard crazy glue

is a favourite and also crayola crayons are used Now for connecting the bridges you need to buy some sort of conductive paint or a trace pen Conductive paint is easily available from auto shops as window defogger repair kits which have silver

in the paint A common mistake is trying to use thermal compound grease such as artic silver but these are nonconductive so incase some gets spread over bridges while applying heat sinks So not you know how things work you want to get to unlocking these chips Well the link is posted for the guide and you know which bridges are to be connected So first off if using crazy glue or super glue to fill in the laser holes you need to tape off the bridges so that crazy glue only gets in the laser pits then you need to use a rasor to trim it down flush MAKE SURE NONE GETS ON THE BRIDGE CONTACTS!! Using the crayon is easier as you just colour over the bridges and use a pencil eraser to remove excess from around the bridges So you got your pits filled and now you need to proceed to tape off only the bridge you want to connect using tape After doing this you can put a drop of paint of use ur conductive pen to connect the 2 bridges I read that if ur brave

enough and have steady hands you can use a conductive pen to draw around the number L3 bridge pit to connect that bridge Sort of using a C shape connection The bridges connect pins at the base of your cpu so if ur not up to the whole

painting the top then you can always try you luck at getting a thin piece of wire maybe from a telephone line and tieing a knot around the pins that need to be

connected Once again the guide shows which pins you would need to set certain voltages and multis Lots of info is available with better pics and i will post some links of sites for yall but goodluck to all trying this

here is a link for unlocking the polominos

http://www.cluboverclocker.com/guid nlock/index.htm

another polomino unlcking guide but with a video

http://www4.tomshardware.com/column/20011124/

Here is one on unlcoking thoroughbreds

http://www.overclockers.com.au/article.php?id=118669

And now just a usefull page on overclocking and unlocking athlons that some

Trang 5

might enjoy looking at

http://www.amdboard.com/ocspecial.html

hey forgot to post the link for CPUFSB which allows you to change FSB in

windows for those whose boards dont support much in the bios

http://www.majorgeeks.com/download.php?det=420

This is Soft FSB for those looking for it It works the same as CPUFSB and allows you to change ur FSB in windows

http://www.voodoofiles.com/250

Now for some videocard overclocking program links

ok this is powerstrip for general overclocking

http://66.227.107.157/ps.htm

radeon tweaker called rage 3d Very opular for overclocking

http://download.guru3d.com/pafiledb ion=file&id=440

patch for 9500-9500 pro or 9700 This is the softmod patch

to execute the above script you will need this which is another tweaker

nvidia videocard tweaker claled nvhardpage

this file is for emulating the quadro family of nvidia using a geforce 4

this is just a geforce tweak utility with no help files

Định dạng
Số trang	6
Dung lượng	64,2 KB