Ebook Photoshop Easy-Hard part 25 docx

Invert and add a shadow with the Burn tool below the mouth.. Use the Dodge and Burn tool to add shadow and light.. 8 On a new layer use the Rounded Rectangle tool to create the beginnin

6

Use the Elliptical shape to create the mouth

Press Fill path

Press Enter

Use the Burn tool with previous settings to add shadows

Use the Dodge tool set on Shadows to highlight

Invert and add a shadow with the Burn tool below the mouth

7

For the eye use the Elliptical shape and fill with black

Right-click on the layer and choose Layer via Copy

Merge this layer onto the head

8

Select the head circle in Paths

Use the Burn tool set on Midtones and add shadowing around the head

9

Invert selection

Using the Pastel Medium Tip brush, enlarge the brush by clicking on ] and making sure the Cap Locks is in the On position

Still using the same red and double-checking to make sure the layer is locked, add color

10 Access Distort>Glass and apply the settings below

11 Apply Sprayed Strokes with the settings below

12

Deselect and use the Magic Wand to select the metal base

Create a gradient and apply to the selected portion vertically without going outside the lines and holding the Shift key down

13 Apply a black to white gradient over the piece and do a Fade Gradient to Overlay

14 Apply a black to red gradient to the last piece

15

Select the Drop Shadow Round 9 Pixel brush

Unlock layer

Specify Flow rate to 100%

Draw out a lash with the Pen tool and use Stroke path in the Paths palette

16 Change to white, hit the [ to reduce the size of the brush and add a highlight to the eye

17

Draw half of a bow

Select medium green

Fill

Right-click and select Layer via Copy

Move into place

Merge down

Use the Magic Wand and select it again

Use the Dodge and Burn tool to add shadow and light

18

Reduce the size of the brush

Using the Burn tool add some freckles

19

Add an Outer Glow through Layer Style

There you have it!

Technical Support Forum : http://vietdown.org/vbb/index.php

Christmas Lights

Jacquelin Vanderwood

1 With the Pen tool selected, map out half of a design of a Christmas light

2 In the Paths palette click on the Fill path button to fill with green

3

Duplicate the layer

Hit Enter and Control+D to deselect

Use Transform to flip horizontally

Move into place

4

Open the Rollover Buttons style palette

Apply one of the colors to the light

5 Let's apply an outer glow to the light by increasing the size to 73 px

6

Apply an Inner Shadow by changing the Blend Mode to Screen, changing the color to red and maximizing Distance Choke and Size remain at 0 px

Make it a new style

7

Duplicate the light layer

Open Color Overlay by double-clicking the layer

Change the color chip to red

Continue to duplicate the light and change the Color Overlay color

8

On a new layer use the Rounded Rectangle tool to create the beginning metal part of the light Fill with a light to dark gray gradient

9 Use the Pen tool to draw out a wire as seen below

10

With the Brush tool selected access the brush libraries and choose Drop Shadow Brushes then select Drop Shadow Round 19 px

11

Select the color green

Over on the Paths palette click on the Stroke path button to fill the path

12 Apply a default Inner Glow and Inner Shadow to the piece

13

On a new layer using the Rounded Rectangle again, create another rounded rectangle and fill with a gradient of medium to dark green

Use the default Bevel and Emboss settings to give it depth

Duplicate along the row

14

Under Assorted Brushes select the Crosshatch 1 tool and increase it's size by pressing the ] sign

Make sure the Caps Lock is on so you can the size of the brush

Select a light yellow and on a new layer create highlights for the lights

You're done

Technical Support Forum : http://vietdown.org/vbb/index.php

Christmas Pig

1 Using the Ellipse tool, create a full circle

2 Create a smaller circle on a new layer

3

Use the Pen tool to create an ear and fill via the Paths palette

Hit Enter and deselect

Right-click layer and choose Layer via Copy

Use Transform to flip horizontal

Move into place

4

Draw a hoof

In Paths right-click and choose Layer via Copy

Use Transform to flip horiztonal

Move the copied leg into place

5 Select the main body of the pig and apply a Lighting Effect using the settings below

6 Open Lighting Effects again and move the light where it should be and apply it to the head

7

For the ears, make adjustments to the light by moving the points around as shown below for the right ear

8 And for the left ear

9 For the left leg

10 For the right leg

11 Create new layer and a new filled circle created with the Ellipse tool then fill

12 Apply lighting to the nose

13

On a new layer create a perfect circle then use the Rectangle tool to select the bottom part it Delete that part

Apply lighting

14

Create a circle in a new layer and drop that layer below the step above

Fill with white

Create a circle above the white circle and fill with black

Duplicate and move into place

15 For the mouth create a triangle layer under the snout and fill

16

From the Layers palette located at the bottom, select the Create New Fill or Adjustment Layer button

Select Color Balance and make adjustments to the Midtone colors

To darken the mouth, open New Adjustment Layer and choose Levels Adjust Levels to darken the mouth

17

Reset your brushes and choose a soft round brush

Click on the Burn tool

Select Midtones

Exposure should be 50%

Give the pig rosy cheeks

Then select the body and add a shadow under the chin area, near the leg areas

Select the head again and add shadows behind the eyes

18

Select the Rounded Rectangle tool Max out the Radius and make a snout hole

Fill with a darker pig color

Use the Burn tool to add shadow

Link and merge all of the layers

Add an Inner Glow with the size of 21 to the whole piece

19

On a new layer create a Rounded Rectangle, rotate it, fill it with red

Use the Burn tool to add shadow

With the Pen tool draw a cap Use the Burn tool for shadowing

Create a circle with the Ellipse tool

Fill with white

With the Burn tool set to Highlights, shadow in the white cirlce

Change to medium green

Select the Dashed Circle 2 tool and increase it's size by pressing the ] key

We're done