AutoIT Help part 80 docx

1 = absolute coordinates default still relative to the dialog box.. MouseCoordMode Sets the way coords are used in the mouse functions, either absolute coords or coords relative to the c

FtpBinaryMode

Changes how FTP files are transferred

1 = Binary (default)

0 = ASCII

GUICloseOnESC

When ESC is pressed on a GUI the

$GUI_EVENT_CLOSE message is sent This option toggles this behavior on and off

1 = Send the $GUI_EVENT_CLOSE message when ESC

is pressed (default)

0 = Don't send the $GUI_EVENT_CLOSE message when ESC is pressed

GUICoordMode

Alters the position of a control defined by GUICtrlSetPos

1 = absolute coordinates (default) still relative to the dialog box

0 = relative position to the start of the last control (upper left corner)

2 = cell positionining relative to current cell A -1 for left

or top parameter don't increment the start

So next line is -1,offset; next cell is offset,-1; current cell

is -1,-1

Obviously "offset" cannot be -1 which reserved to indicate the no increment But if you can use a multiple of the width you choose to skip or go back

GUIDataSeparatorChar

Define the character which delimits subitems in GUICtrlSetData

The default character is '|'

GUIOnEventMode

Enable/disable OnEvent functions notifications

0 = (default) disable

1 = enable

GUIResizeMode

Change default resizing for a control

0 = (default) keep default control resizing

<1024 = anytype of resizing see GUICtrlSetResizing

GUIEventOptions

Change special event behavior or GUI function return values

0 = (default) Windows behavior on click on Minimize,Restore, Maximize, Resize

1 = suppress windows behavior on minimize, restore or

maximize click button or window resize Just sends the notification

MouseClickDelay

Alters the length of the brief pause in between mouse clicks

Time in milliseconds to pause (default=10)

MouseClickDownDelay Alters the length a click is held down before release

Time in milliseconds to pause (default=10)

MouseClickDragDelay

Alters the length of the brief pause at the start and end of

a mouse drag operation

Time in milliseconds to pause (default=250)

MouseCoordMode

Sets the way coords are used in the mouse functions, either absolute coords or coords relative to the current active window:

0 = relative coords to the active window

1 = absolute screen coordinates (default)

2 = relative coords to the client area of the active window

MustDeclareVars

If this option is used then all variables must be pre-declared with Dim, Local or Global before they can be used - removes the chance for misspelled variables causing bugs

1 = Variables must be pre-declared

0 = Variables don't need to be pre-declared (default) OnExitFunc Sets the name of the function called when AutoIt exits

(default is OnAutoItExit)

PixelCoordMode

Sets the way coords are used in the pixel functions, either absolute coords or coords relative to the window defined

by hwnd (default active window):

0 = relative coords to the defined window

1 = absolute screen coordinates (default)

2 = relative coords to the client area of the defined window

SendAttachMode

Specifies if AutoIt attaches input threads when using Send() function When not attaching (default mode=0) detecting the state of capslock/scrolllock and numlock can be unreliable under NT4 However, when you specify attach mode=1 the Send("{ down/up}") syntax will not

work and there may be problems with sending keys to

"hung" windows ControlSend() ALWAYS attaches and

is not affected by this mode

0 = don't attach (default)

1 = attach

SendCapslockMode

Specifies if AutoIt should store the state of capslock before a Send function and restore it afterwards

0 = don't store/restore

1 = store and restore (default)

SendKeyDelay

Alters the the length of the brief pause in between sent keystrokes A value of 0 removes the delay completely Time in milliseconds to pause (default=5)

SendKeyDownDelay

Alters the length of time a key is held down before being released during a keystroke For applications that take a while to register keypresses (and many games) you may need to raise this value from the default A value of 0 removes the delay completely

Time in milliseconds to pause (default=5)

TCPTimeout

Defines the time before TCP functions stop if no communication

Time in milliseconds before timeout (default=100)

TrayAutoPause

Script pauses when click on tray icon

0 = no pause

1 = pause (default) If there is no DefaultMenu no pause will occurs

TrayIconDebug

If enabled shows the current script line in the tray icon tip

to help debugging

0 = no debug information (default)

1 = show debug

TrayIconHide

Hides the AutoIt tray icon Note: The icon will still initially appear ~750 milliseconds

0 = show icon (default)

1 = hide icon

TrayMenuMode

Extend the behaviour of the script tray icon/menu This can be done with a combination (adding) of the following values

0 = default menu items (Script Paused/Exit) are appended

to the usercreated menu; usercreated checked items will automatically unchecked; if you double click the tray icon then the controlid is returned which has the "Default"-style (default)

1 = no default menu

2 = user created checked items will not automatically unchecked if you click it

4 = don't return the menuitemID which has the "default"-style in the main contextmenu if you double click the tray icon

8 = turn off auto check of radio item groups

TrayOnEventMode

Enable/disable OnEvent functions notifications for the tray

0 = (default) disable

1 = enable

WinDetectHiddenText

Specifies if hidden window text can be "seen" by the window matching functions

0 = Do not detect hidden text (default)

1 = Detect hidden text

WinSearchChildren

Allows the window search routines to search child windows as well as top-level windows

0 = Only search top-level windows (default)

1 = Search top-level and child windows

WinTextMatchMode

Alters the method that is used to match window text during search operations

1 = Complete / Slow mode (default)

2 = Quick mode

In quick mode AutoIt can usually only "see" dialog text, button text and the captions of some controls In the default mode much more text can be seen (for instance the contents of the Notepad window)

If you are having performance problems when performing many window searches then changing to the

"quick" mode may help

WinTitleMatchMode Alters the method that is used to match window titles

during search operations

1 = Match the title from the start (default)

2 = Match any substring in the title

3 = Exact title match

4 = Advanced mode, see Window Titles & Text (Advanced)

-1 to -4 = force lower case match according to other type

of match

WinWaitDelay

Alters how long a script should briefly pause after a successful window-related operation

Time in milliseconds to pause (default=250)

Related

Many!

Example

; copy any you want to change ;default value is listed first

Opt("CaretCoordMode", 1) ;1=absolute, 0=relative, 2=client

Opt("ExpandEnvStrings", 0) ;0=don't expand, 1=do expand

Opt("ExpandVarStrings", 0) ;0=don't expand, 1=do expand

Opt("FtpBinaryMode", 1) ;1=binary, 0=ASCII

Opt("GUICloseOnESC", 1) ;1=ESC closes, 0=ESC won't close

Opt("GUICoordMode", 1) ;1=absolute, 0=relative, 2=cell

Opt("GUIDataSeparatorChar","|") ;"|" is the default

Opt("GUIOnEventMode", 0) ;0=disabled, 1=OnEvent mode enabled

Opt("GUIResizeMode", 0) ;0=no resizing, <1024 special resizing

Opt("GUIEventOptions",0) ;0=default, 1=just notification, 2=GuiCtrlRead tab index

Opt("MouseClickDelay", 10) ;10 milliseconds

Opt("MouseClickDownDelay", 10) ;10 milliseconds

Opt("MouseClickDragDelay", 250) ;250 milliseconds

Opt("MouseCoordMode", 1) ;1=absolute, 0=relative, 2=client

Opt("MustDeclareVars", 0) ;0=no, 1=require pre-declare

Opt("OnExitFunc","OnAutoItExit");"OnAutoItExit" called Opt("PixelCoordMode", 1) ;1=absolute, 0=relative, 2=client