Configuring Windows 7 (Training Kit) - Part 6 doc

Windows 7 Professional contains all the features present in Windows Home Premium as well as some additional features; and Windows 7 Ultimate contains all the features in Windows 7 Profes

n Windows 7 can be installed from a DVD-ROM, a USB storage device, a network share,

or a WDS server The DVD-ROM and USB storage devices should be used with a small

number of computers WDS with a large number of computers, and a network share in

environments that do not support WDS

n Windows 7 can be configured to dual-boot with Windows XP, Windows Vista, and

Windows 7 You can only configure Windows 7 to boot from VHD if the computer has

a Windows 7 or Windows Server 2008 R2 boot environment

Lesson Review

You can use the following questions to test your knowledge of the information in Lesson 1,

“Installing Windows 7 ” The questions are also available on the companion DVD if you prefer

to review them in electronic form

note aNSWerS

Answers to these questions and explanations of why each answer choice is correct or

incorrect are located in the “Answers” section at the end of the book

1 Which utility can you use to prepare a USB storage device so that you can boot from it

to install Windows 7 on a laptop computer that does not have a DVD-ROM drive?

a LoadState exe

B ScanState exe

c Diskpart

D Bcdedit

2 You want to deploy a new computer for software compatibility testing This computer

needs to be able to boot into the Windows 7, Windows XP, and Windows Vista

operating systems In which order should you install the operating systems to meet this

objective without having to edit boot entries using Bcdedit?

a Windows 7, Windows XP, and then Windows Vista

B Windows Vista, Windows 7, and then Windows XP

c Windows XP, Windows 7, and then Windows Vista

D Windows XP, Windows Vista, and then Windows 7

3 Which of the following versions and editions of Windows 7 can you install to take

advantage of the hardware resources on a computer that has 16 GB of RAM? (Choose

all that apply )

a Windows 7 Ultimate x86

B Windows 7 Professional x64

c Windows 7 Enterprise x86

D Windows 7 Home Premium x64

4 You want to use WDS to perform a network installation of Windows 7 Which of the following hardware devices must the computer have, assuming that you are not booting the computer from a WDS discover image?

a A DVD-ROM drive

B A PXE-compliant network adapter

c A USB 2 0 slot

D An HDMI port

5 What is the minimum number of volumes that a computer running Windows XP should have if you want to support dual-booting with Windows 7?

a 1

B 2

c 3

D 4

Lesson 2: Upgrading to Windows 7

Although most large organizations use system images to allow rapid deployment of an

operating system, settings, and applications to new computers, most smaller organizations

have a more haphazard approach to the management of desktop computers Applications

are often purchased and installed on an as-needed basis, and in many organizations, no two

computers have exactly the same set of applications installed This can make rolling out a new

operating system challenging If you perform clean installations for people, you need to make

sure that you are able to install the unique set of applications that they had on their original

computers A large benefit of upgrading from one operating system to the next is that all

user data and applications that were present on the previous operating system are present

on the upgraded operating system In this lesson, you learn about the conditions under which

you an upgrade to Windows 7 while retaining all the applications and data that existed on the

computer prior to the upgrade

After this lesson, you will be able to:

n Upgrade to Windows 7 from Windows Vista

n Migrate to Windows 7 from Windows XP

n Upgrade from one edition of Windows 7 to another edition of Windows 7

Estimated lesson time: 70 minutes

Upgrading from Windows 7 Editions

Sometimes it is necessary to upgrade from one edition of Windows 7 to another For

example, suppose that a small business has purchased several laptop computers that came

with Windows 7 Home Basic installed, but they want to use the BitLocker feature and join

the computers to the domain Rather than just wiping the computers and installing another

edition of Windows 7, it is possible to upgrade those computers to an edition of Windows 7

that supports the features the small business wants

There are several advantages to performing an edition upgrade of Windows 7 rather than

performing a clean install with another edition The first advantage is that performing an

intra-edition upgrade is cheaper than purchasing a brand-new operating system license For

example, upgrading to Windows 7 Ultimate from Windows 7 Home Basic is cheaper than

purchasing a new Windows 7 Ultimate license The second advantage is that you retain all

applications and data that were already present on the existing computer

As you learned in Lesson 1, each Windows 7 SKU is a superset of the one before it

Windows 7 Professional contains all the features present in Windows Home Premium as well

as some additional features; and Windows 7 Ultimate contains all the features in Windows 7

Professional, as well as its own additional features

Windows 7 allows you to upgrade from one edition to another so long as that edition has more features For example, you can upgrade from Home Premium to Professional, Enterprise, or Ultimate editions, but you cannot upgrade from Ultimate to Home Premium or Professional editions

Although it is possible to upgrade between editions of Windows 7, it is not possible to upgrade between versions of Windows 7 You cannot upgrade an x86 version to an x64 version, and you cannot upgrade an x64 version to an x86 version For example, a developer in your organization has a computer with 4 GB of RAM and the x86 version of Windows 7 Enterprise installed This particular developer does a lot of work testing application compatibility using virtual machines and needs more RAM The x86 version of Windows 7 Enterprise supports

a maximum of 4 GB of RAM The x64 version of Windows 7 Enterprise supports up to 128 GB

of RAM However, it is not possible to upgrade the x86 version of Windows 7 Enterprise to the x64 version of Windows 7 It will be necessary to perform a wipe-and-load migration instead, backing up the developer’s data and performing a clean installation of the x64 operating system before importing it onto the upgraded computer Alternatively, you could configure the computer to dual-boot between an x86 and an x64 edition of Windows 7, something made even simpler with the boot from VHD functionality that is included with the Enterprise and Ultimate editions It is still necessary to migrate data between the two operating systems however Migration is covered in more detail in Lesson 3, “Managing User Profiles ”

You can use either of the following two methods to perform an upgrade from one edition

of Windows 7 to another:

n Upgrade using the installation media Upgrading using the media is similar to upgrading from Windows Vista You obtain the product key for the edition you want

to upgrade to and then start an upgrade using the Windows 7 installation media This method is most appropriate for organizations where a large number of intra-edition upgrades is required

n Windows anytime Upgrade With Windows Anytime Upgrade, shown in Figure 1-14, you can purchase an upgrade to an application over the Internet and have the features unlocked automatically This upgrade method is more suitable for home users and users in small businesses where a small number of intra-edition upgrades is required

Upgrading from Windows Vista

You can upgrade computers running Windows Vista to Windows 7 When you upgrade from Windows Vista to Windows 7, all documents, settings, applications, and user accounts that existed on the computer running Windows Vista are available when the upgrade is finished The advantage to an upgrade is that it allows you to keep the current application configuration When you perform a migration, you need to reinstall the user’s applications

on the new computer As mentioned previously, this can be problematic in organizations that are not careful about keeping track of which specific set of applications are installed on each user’s computer

FIgUre 1-14 Windows Anytime Upgrade

Prior to attempting to perform the upgrade from Windows Vista to Windows 7, you should

run the Windows 7 Upgrade Advisor The Windows 7 Upgrade Advisor is an application that

you can download from Microsoft’s Web site that will inform you if Windows 7 supports a

computer running the current hardware and software configuration of Windows Vista Prior

to running the Windows 7 Upgrade Advisor, you should ensure that all hardware that you

want to use with Windows 7, such as printers, scanners, and cameras, are connected to the

computer The Upgrade Advisor generates a report that informs you of which applications

and devices are known to have problems with Windows 7 A similar compatability report is

generated during the upgrade process, but the version created by the Windows 7 Upgrade

Advisor is more likely to be up to date

More Info WINDOWS 7 UpgraDe aDVISOr

You can obtain the Windows 7 Upgrade Advisor from the following Web site:

http://www.microsoft.com/windows/windows-7/upgrade-advisor.aspx.

note USe a SearCh eNgINe

Another way to determine whether a particular hardware device or application is

compatible with Windows 7 is to use a search engine It is likely that someone before you

has attempted to use the set of hardware devices and applications that you are interested

in with Windows 7 If they have had a problem with it, it is likely that they have posted

information about it in a support forum, a blog, or somewhere else on the World Wide Web.

Windows Vista and Windows 7 have the same basic hardware requirements This means that you should not have to upgrade the RAM or processor for your computer running Windows Vista to support Windows 7, though you need at least 10 extra gigabytes on the Windows Vista volume to perform the upgrade

You should keep the following in mind prior to and during the upgrade from Windows Vista to Windows 7:

n Perform a full backup of the computer running Windows Vista prior to performing the installation That way, if things go wrong, you can do a full restore back to Windows Vista

n You must ensure that Windows Vista has Service Pack 1 or later installed before you can upgrade it to Windows 7

n Ensure that you have the Windows 7 product key prior to the upgrade

n You cannot upgrade between processor architectures An x86 version of Windows Vista cannot be upgraded to an x64 version of Windows 7, and vice versa

n You can upgrade only to an equivalent or higher edition of Windows 7 You can upgrade Windows Vista Home Premium to Windows 7 Home Premium, Professional, Enterprise, or Ultimate, but not to Windows 7 Starter Windows 7 Professional is equivalent to Windows Vista Business

n Ensure that there is at least 10 GB of free disk space on the Windows Vista volume prior to attempting the upgrade

You will perform an upgrade from Windows Vista to Windows 7 in the practice exercise at the end of this lesson

Rolling Back a Failed Upgrade

A Windows 7 upgrade automatically rolls back to Windows Vista if there is a failure during the installation process You can also roll back to Windows Vista manually up until the point where a successful logon occurs This means that if there is a problem with a hardware driver that prevents you from successfully logging on, you can go back to your existing Windows Vista installation After you have performed a successful logon to Windows 7, however, it

is not possible to return to Windows Vista without performing a clean installation of the operating system or a restore from backup

quick Check

n Under which conditions is it not possible to upgrade from Windows Vista to Windows 7?

quick Check answer

n You cannot upgrade from an x86 version of Windows Vista to an x64 version

of Windows 7, nor from an x64 version of Windows Vista to an x86 version of Windows 7 It is also not possible to upgrade from certain editions of Windows Vista to certain editions of Windows 7.

Migrating from Windows XP

It is not possible to upgrade directly from Windows XP to Windows 7 If you attempt an

upgrade, you receive the message shown in Figure 1-15 Organizations that want to move

users from computers running Windows XP to Windows 7 need to consider migration

FIgUre 1-15 No upgrade from Windows XP to Windows 7

There are two basic migration scenarios for migrating user profile data: the side-by-side

migration and the wipe-and-load migration The version that you choose depends largely

on the computer hardware of the source computer If the source computer has sufficient

hardware to support Windows 7, and you choose not to configure the computer to dual-boot,

you perform a wipe-and-load migration If the source computer’s hardware is not sufficient to

support Windows 7, you need to perform a side-by-side migration You also need to perform

a side-by-side migration if you are configuring the computers to dual-boot because that is the

only way to get application data from the Windows XP partition to the Windows 7 partition

Side-by-Side Migrations

You use side-by-side migrations when you need to move user data from one computer to

another Depending on the migration method you use, you may need to ensure that both

computers are turned on during the migration This is necessary when you use methods that

directly transfer data from one computer to another, such as through a special cable or over

the network The advantage of a side-by-side migration is that all data remains on the source

computer even after it is migrated to the destination computer If something goes wrong with

the migration, the user can still go back to the old computer

Wipe-and-Load Migrations

Wipe-and-load migrations involve exporting user data from a machine to an external location,

such as a USB storage device or network share, removing the existing operating system, performing a clean installation of Windows 7, and then importing the user data from the external location Once you successfully complete the migration, you can delete the user data from the external location

You use wipe-and-load migrations when you need to install Windows 7, but you cannot perform a direct upgrade because the computer has Windows XP installed or a version of Windows Vista or Windows 7 that uses a different architecture For example, you wanted to change the operating system on a computer from Windows 7 Enterprise (x86) to Windows 7 Enterprise (x64) The disadvantage of a wipe-and-load migration is that the user cannot go back to their original configuration easily if something goes wrong during the migration You will learn more about migrating data in Lesson 3

In this optional practice, you upgrade an existing computer running Windows Vista to Windows 7 You should ensure that the computer has at least 10 GB of free space for the upgrade to be successful This upgrade can be performed on a computer running Windows Vista through virtualization software

exercise 1 Upgrading Windows Vista to Windows 7

Before starting this exercise, ensure that the version of Windows 7 that you will be upgrading

to shares the same architecture as the version of Windows Vista that you are upgrading For example, if you have an x86 version of Windows Vista, make sure that you have the installation media for the x86 version of Windows 7 Perform the following steps:

1 Log on to the computer running Windows Vista with a user account that is a member

of the local Administrators group

2 Access the Windows 7 installation source and double-click Setup exe When prompted

by User Account Control, click Allow This loads the Install Windows page Click Install Now

3 On the Get Important Updates For Installation page, click Do Not Get The Latest Updates For Installation

4 On the licensing page, review the Windows 7 operating system license and then select the I Accept The License Terms check box Click Next

5 On the Which Type Of Installation Do You Want? page, click Upgrade The installation routine performs a compatibility check and then begins upgrading Windows Depending on the speed of the computer you are upgrading, this step may take time The computer reboots several times during this process

It is possible to roll back the upgrade when the computer restarts by selecting the Roll

Back Upgrade option from the boot menu Do not do this unless you want to restart the

upgrade.

6 On the Type Your Product Key For Activation page, enter the Windows 7 product key

as shown in Figure 1-16, clear the Automatically Activate Windows When I’m Online

check box, and click Next

FIgUre 1-16 Enter the product key

7 On the Help Protect Your Computer And Improve Windows Automatically page, click

Use Recommended Settings

8 On the Review Your Time And Date Settings page, ensure that the time zone setting

matches your locale and that the clock setting is accurate and then click Next

9 On the Select Your Computer’s Current Location page, click Home Network

10 Log on to the upgraded computer running Windows 7 using the credentials that you

used to log on to the computer running Windows Vista at the start of this exercise

11 Turn off the upgraded computer running Windows 7

Lesson Summary

n You can upgrade Windows Vista to Windows 7 only when the version of Windows 7 you are upgrading to shares the same architecture (x86 or x64) and is an equivalent or higher edition

n You should run the Windows 7 Upgrade Advisor prior to attempting an upgrade to ensure that hardware and software installed on the computer running Windows Vista

is compatible with Windows 7

n You can upgrade from an edition of Windows 7 with fewer features to an edition with more features, but not from an edition that has more features to one that has fewer features

n It is not possible to upgrade from Windows XP to Windows 7 at all

n Side-by-side migrations involve moving data from one computer to another or from one partition to another in dual-boot scenarios

n Wipe-and-load migrations involve moving user data off a computer, removing the existing operating system installation, replacing it with a new Windows 7 installation, and then importing the original user data

Lesson Review

You can use the following questions to test your knowledge of the information in Lesson 2,

“Upgrading to Windows 7 ” The questions are also available on the companion DVD if you prefer to review them in electronic form

note aNSWerS

Answers to these questions and explanations of why each answer choice is correct or

incorrect are located in the “Answers” section at the end of the book

1 To which of the following versions and editions of Windows 7 can you directly upgrade

a computer running Windows Vista Enterprise (x86)?

a Windows 7 Home Professional (x86)

B Windows 7 Ultimate (x86)

c Windows 7 Ultimate (x64)

D Windows 7 Enterprise (x64)

2 In which of the following scenarios must you perform a migration rather than an upgrade? (Choose all that apply )

a Windows XP Professional (x64) to Windows 7 Professional (x64)

B Windows Vista Business (x86) to Windows 7 Professional (x64)

c Windows Vista Enterprise (x64) to Windows 7 Enterprise (x64)

D Windows Vista Home Premium (x64) to Windows 7 Home Premium (x86)