Tool Geometry: the Two R’s [Milling Geometry].. A Tale of Two Metals [Milling Stainless Steel].. Deep Impact [Milling Deep Pockets].. Cutting Geometries for Milling and a New Ap-proach
Trang 1Journal and Conference Papers
Chaplin, R Tool Geometry: the Two R’s [Milling Geometry]
Cutting Tool Eng’g., 52–55, Dec 1999
Crockford, G Application of Modern Tooling in Machining
Centres, Int Conf on Industrial Tooling, Shirley Press,
95–100, Sept 1997
Deren, M A Tale of Two Metals [Milling Stainless Steel]
Cutting Tool Eng’g., 48–56, May 2001
Deren, M Deep Impact [Milling Deep Pockets] Cutting
Tool Eng’g., 40–45, Oct 2001
Eacott, R Cutting Geometries for Milling and a New
Ap-proach to Chip Control Int Conf on Industrial Tooling,
Molyneux Press, 52–61, Sept 1999
Ekback, M Cut Longer and Better [Milling Cutter
Applica-tions] American Machinist, 51–54, Nov 1996
Godden, T Tools for Multi-axis Machining Int Conf on
Industrial Tooling, Test Valley Group, 255–266, Sept
2003
Heuwinkel, M and Richter, A Let’s Talk Radial [Approach
Angles – Milling] Cutting Tool Eng’g., 64–70, May
2005
Heuwinkel, M As Easy as X, Y, Z [Helical Interpolation
– Milling] Cutting Tool Eng’g., 58–62, Aug 2006
Isakov, E The Mathematics of Machining American
Ma-chinist, 37–39, Aug 1996
Isakov, E Reassessing Power Factors [Milling] American
Machinist, 43–45, Dec 1996
Isakov, E Power Equations Cutting Tool Eng’g., 66–71,
May 2001
Kennedy, B Facing Facts [Face Milling – Automotive
Parts] Cutting Tool Eng’g., 29–37, Feb 2002
Kennedy, B Wall Smart [Thin-wall Milling] Cutting Tool
Eng’g., 26–33, Feb 2007
Kline, W.A., DeVor, R.E and Lindberg, J.R The Prediction
of Cutting Forces in End Milling with Application to
Cor-nering Cuts Int J Mach Tool Des Res., Vol 22, 7–22,
1982
McNamara, D Getting Down [Plunge Milling] Cutting
Tool Eng’g., 44–47, Oct 2003
Richter, A The Right Angle [‘Angled’ Milling Heads]
Cut-ting Tool Eng’g., 48–53, July 2004
Rowe, J Right Face [Face Milling] Cutting Tool Eng’g.,
56–61, Sept 2001
Sandvik Coromant Geometries at Work [Milling Cutters].
Cutting Tool Eng’g., 56–63, May 2003
Smith, G.T and Booth, S The Manufacture [Milling] of Propellers using Three and Five Axis Machining Cen-tres Proc of LAMDAMAP Int Conf., Computational
Mechanics Pub., 307–316, 1993
Stabler, G.V The Fundamental Geometry of Cutting Tools,
Proc IMechE, Vol/165, 14–26, 1951
Tlusty, J and Masood, Z Chipping and Breakage of Carbide Tools, ASME J of Eng’g for Ind., Vol 100, 403–412, Nov
1980
Yamane, Y and Narutaki, N The Effect of Atmosphere on Tool Failure in Face Milling – (1st Report) J Jap Soc
Prec Eng’rs Vol 49 (8), 521–527, 1983
Books, Booklets and Guides
Application Guide – Aerospace Frames [Milling], Sandvik
Coromant Pub No C-2920:17 ENG/01, 2003
Application Guide – Die and Mould Making, Sandvik
Coro-mant Pub No C-1120:2 ENG, 2000
Application Guide – Face milling, Sandvik Coromant Pub
No C-1120:1 ENG, 1998
Application Guide – Side and Facemilling, Sandvik
Coro-mant Pub No C-1129:022 ENG, 1996
Boothroyd, G and Knight, W.A Fundamentals of Machin-ing and Machine Tools Marcel Dekkar (NY), 1989.
Childs T.H.C., Maekawa, K Obikawa, T and Yamane, Y
Metal Machining – Theory and Applications Arnold
Pub., 2000
Ingersol Pub Fine Tuning [Milling Cutter Rigidity], 14–15,
The Cutting Edge, No.3, 1987
Ingersol Pub Fine Tuning [Milling Optimisation], 14–15,
The Cutting Edge, No.2, 1988
Ingersol Pub Fine Tuning [Milling Cutter Insert Density],
14–15, The Cutting Edge, No.1, 1989
Ingersol Pub Fine Tuning [Milling Insert Edge Prep.], 14–
15, The Cutting Edge, No.1, 1992
Kalpakjian, S Manufacturing Engineering and Technology
Addison Wesley, 1989
Machining Data Handbook 3rd Ed., Machinability Data Center, MetCut Pub (Cincinnati), 1980
Metals Handbook – Vol 16 – Machining ASM Int Matls
Park (Ohio), 1989
Modern Metal Cutting – Part 6: Milling Theory AB Sandvik
Coromant Pub., 1980
Modern Metal Cutting – Part 7: Milling Tools AB Sandvik
Coromant Pub., 1980
Trang 2Modern Metal Cutting – A Practical Handbook AB
Sand-vik Coromant Pub., 1994
Oxley, P.L.B Mechanics of Machining Ellis Horwood Pub.,
1989
Shaw, M.C Metal Cutting Principles Oxford Univ Press,
1989
Society of Manufacturing Eng’rs., Tool and Manufacturing
Engineers Handbook – Vol 1 – Machining 4th Ed., SME
Pub., Dearborn, Mich., 1983
Smith, G.T Advanced Machining – The Handbook of
Cut-ting Technology, IFS/Springer Verlag, 1989.
Smith, G.T CNC Machining Technology Springer Verlag,
1993
Tlusty, G Manufacturing Processes and Equipment
Pren-tice Hall, 2000
Usui, E Modern Machining Theory [i.e In Japanese]
Kyo-ritu-shuppan (Tokyo), 1990
Zorev, N.N Metal Cutting Mechanics Pergamon Press
(Oxford), 1966